2.6.9-rc3 software suspend (pmdisk) stopped working
Well it appears that Jesse and Kevin are right and irrespective of the setting of /sys/power/disk, i can get the machine to suspend by first writing 'platform' into the 'disk' file. And it resumes fine ok. Seems to be a false alarm on my part Pavel, although the doc's need updating and /sys/power/disk made to show the correct supported suspension methods ?
Thanks for the tips guys (i didn't need the c code Jesse) M
-------- Original Message --------
Subject: Re: 2.6.9-rc3 software suspend (pmdisk) stopped working
Date: Sat, 02 Oct 2004 16:32:33 -0400
From: Jesse <[email protected]>
To: Mitch <[email protected]>
CC: [email protected], [email protected]
References: <[email protected]>
Quoted 7 lines · Mitch
Hi Jesse,
as shown below, that is not one of the options presented to me in my 'disk' file
% cat
/sys/power/disk
shutdown
My machine shows the same thing. Only shutdown in /sys/power/disk
Grab the code from Documentation/power/swsusp.txt (starts at line 151)
I compiled it to an executable called swsusp and I then run 'swsusp' to start the suspend process.
2.6.9-rc3 was my first attempt at suspend, and it worked as designed on the first try.
Jesse
Hi!
Quoted 6 lines
Well it appears that Jesse and Kevin are right and irrespective of the setting of
/sys/power/disk, i can get the machine to suspend by first writing 'platform' into the 'disk' file. And it resumes fine ok. Seems to be a false alarm on my part Pavel, although the doc's need updating and/sys/power/diskmade to show the correct supported suspension methods ?
It seemed to me that some driver is blocking suspend (USB?). I do not know what is wrong with that disk file, it looks like a bug.
Signature · 1 line
64 bytes from 195.113.31.123: icmp_seq=28 ttl=51 time=448769.1 ms
Hello,
Quoted 4 lines · Pavel Machek
Hi!
I do not
know what is wrong with that disk file, it looks like a bug.
reading /sys/power/disk gives you the _active_ state, not the available states.
HTH,
Stefan