CDROM support in ata_piix?
I have an IBM server with a SATA controller listed as:
0000:00:1f.2 IDE interface: Intel Corp. 6300ESB SATA Storage Controller (rev 02)
Debian's 2.6.8 kernel with libata works fine, except that the CDROM (which is on a PATA port) does not appear as a SCSI device. It's also not seen by the regular IDE driver, because ata_piix has already grabbed the i/o resources--I get:
ide0: I/O resource 0x1F0-0x1F7 not free.
ide0: ports already in use, skipping probe
ide1: I/O resource 0x170-0x177 not free.
ide1: ports already in use, skipping probe
Is there any way to get ata_piix to register my CDROM, or alternatively to have the regular IDE driver handle it?
This seems to be a known problem (it's filed as a Debian bug)--is it fixed in 2.6.9-rc4? I had a look at the -rc4 patch but couldn't tell from the diff whether there's anything CDROM-related in there...
Thanks,
Doug
Quoted 14 lines · Doug McNaught
I have an IBM server with a SATA controller listed as:
0000:00:1f.2 IDE interface: Intel Corp. 6300ESB SATA Storage Controller (rev 02)
Debian's 2.6.8 kernel with libata works fine, except that the CDROM (which is on a PATA port) does not appear as a SCSI device. It's also not seen by the regular IDE driver, because
ata_piixhas already grabbed the i/o resources--I get:ide0: I/O resource 0x1F0-0x1F7 not free.
ide0: ports already in use, skipping probe
ide1: I/O resource 0x170-0x177 not free.
ide1: ports already in use, skipping probe
Quoted 6 lines
Is there any way to get
ata_piixto register my CDROM, or alternatively to have the regular IDE driver handle it?This seems to be a known problem (it's filed as a Debian bug)--is it fixed in 2.6.9-rc4? I had a look at the -rc4 patch but couldn't tell from the diff whether there's anything CDROM-related in there...
Well, two things are going on:
You may need to set CONFIG_BLK_DEV_SATA (or unset it) depending on your configuration.
Once you get past that, you need to apply the latest libata patch to fix a related combined mode bug.
http://lkml.org/lkml/2004/10/14/336
Jeff
Quoted 11 lines · Jeff Garzik
Quoted 5 lines · Doug McNaught
Is there any way to get
ata_piixto register my CDROM, or alternatively to have the regular IDE driver handle it? This seems to be a known problem (it's filed as a Debian bug)--is it fixed in 2.6.9-rc4? I had a look at the -rc4 patch but couldn't tell from the diff whether there's anything CDROM-related in there...Well, two things are going on:
You may need to set
CONFIG_BLK_DEV_SATA(or unset it) depending on your configuration.
I will look into this.
Quoted 4 lines
Once you get past that, you need to apply the latest libata patch to fix a related combined mode bug.
I will probably wait until this trickles into a Linus kernel--I don't have an immediate need for the CDROM (and I can boot 2.4 if I have to).
Thanks very much for the response!
-Doug
Signature · 2 lines
Let us cross over the river, and rest under the shade of the trees. --T. J. Jackson, 1863