Misc ppc/mac machines clean up
v2 cover Misc ppc/mac machines clean up
This series includes some clean ups to mac_newworld and mac_oldworld to make them a bit simpler and more readable, It also removes the shared mac.h file that turns out was more of a random collection of unrelated things. Getting rid of this mac.h improves the locality of device models and reduces unnecessary interdependency.
v2: Split some patches and add a few more I've noticed now and address review comments
BALATON Zoltan (13):
mac_newworld: Drop some variables
mac_oldworld: Drop some more variables
mac_{old|new}world: Set tbfreq at declaration mac_{old|new}world: Avoid else branch by setting default value
mac_oldworld: Do not open code sysbus_mmio_map()
mac_newworld: Simplify creation of Uninorth devices mac_{old|new}world: Reduce number of QOM casts hw/ppc/mac.h: Move newworld specific parts out from shared header hw/ppc/mac.h: Move macio specific parts out from shared header hw/ppc/mac.h: Move grackle-pcihost declaration out from shared header hw/ppc/mac.h: Move PROM and KERNEL defines to board code hw/ppc/mac.h: Rename to include/hw/nvram/mac_nvram.h
mac_nvram: Use NVRAM_SIZE constant
MAINTAINERS | 1 + hw/ide/macio.c | 1 - hw/intc/heathrow_pic.c | 1 - hw/intc/openpic.c | 1 - hw/misc/macio/cuda.c | 1 - hw/misc/macio/gpio.c | 1 - hw/misc/macio/macio.c | 8 +- hw/misc/macio/pmu.c | 1 - hw/nvram/mac_nvram.c | 2 +- hw/pci-host/grackle.c | 2 +- hw/pci-host/uninorth.c | 1 - hw/ppc/mac.h | 105 ---------------- hw/ppc/mac_newworld.c | 223 ++++++++++++++++------------------ hw/ppc/mac_oldworld.c | 113 +++++++---------- include/hw/misc/macio/macio.h | 23 +++- include/hw/nvram/mac_nvram.h | 51 ++++++++ 16 files changed, 230 insertions(+), 305 deletions(-) delete mode 100644 hw/ppc/mac.h create mode 100644 include/hw/nvram/mac_nvram.h
Signature · 1 line
2.30.4
PATCH v2 1/13 mac_newworld: Drop some variables
Values not used frequently enough may not worth putting in a local variable, especially with names almost as long as the original value because that does not improve readability, to the contrary it makes it harder to see what value is used. Drop a few such variables. This is the same clean up that was done for mac_oldworld in commit b8df32555ce5.
--- hw/ppc/mac_newworld.c | 65 +++++++++++++++++++------------------------ 1 file changed, 29 insertions(+), 36 deletions(-)
hw/ppc/mac_newworld.c +29 -36
@@ -106,18 +106,13 @@ static void ppc_core99_reset(void *opaque)/* PowerPC Mac99 hardware initialisation */ static void ppc_core99_init (MachineState *machine) { -ram_addr_t ram_size = machine->ram_size; -const char *bios_name = machine->firmware ?:PROM_FILENAME ; -const char *kernel_filename = machine->kernel_filename; -const char *kernel_cmdline = machine->kernel_cmdline; -const char *initrd_filename = machine->initrd_filename; -const char *boot_device = machine->boot_config.order;Core99MachineState *core99_machine =CORE99_MACHINE (machine);PowerPCCPU *cpu =NULL ;CPUPPCState *env =NULL ;char *filename;IrqLines *openpic_irqs; -int linux_boot, i, j, k; +int i, j, k, ppc_boot_device, machine_arch, bios_size; +const char *bios_name = machine->firmware ?:PROM_FILENAME ;MemoryRegion *bios =g_new (MemoryRegion,1 );hwaddr kernel_base, initrd_base, cmdline_base =0 ;long kernel_size, initrd_size;
@@ -129,22 +124,16 @@ static void ppc_core99_init(MachineState *machine)MACIOIDEState *macio_ide;BusState *adb_bus;MacIONVRAMState *nvr; -int bios_size; -int ppc_boot_device;DriveInfo *hd[MAX_IDE_BUS *MAX_IDE_DEVS ];void *fw_cfg; -int machine_arch;SysBusDevice *s;DeviceState *dev, *pic_dev;DeviceState *uninorth_internal_dev =NULL , *uninorth_agp_dev =NULL ;hwaddr nvram_addr =0xFFF04000 ;uint64_t tbfreq; -unsigned int smp_cpus = machine->smp.cpus; - - linux_boot = (kernel_filename !=NULL );/* init CPUs */ -for (i =0 ; i < smp_cpus; i++) { +for (i =0 ; i < machine->smp.cpus; i++) { cpu =POWERPC_CPU (cpu_create (machine->cpu_type)); env = &cpu->env;
@@ -184,7 +173,7 @@ static void ppc_core99_init(MachineState *machine)exit (1 ); } -if (linux_boot) { +if (machine->kernel_filename) {int bswap_needed;#ifdef BSWAP_NEEDED
@@ -194,29 +183,31 @@ static void ppc_core99_init(MachineState *machine)#endif kernel_base =KERNEL_LOAD_ADDR ; - kernel_size =load_elf (kernel_filename,NULL , + kernel_size =load_elf (machine->kernel_filename,NULL , translate_kernel_address,NULL ,NULL ,NULL ,NULL ,NULL ,1 ,PPC_ELF_MACHINE ,0 ,0 );if (kernel_size <0 ) - kernel_size =load_aout (kernel_filename, kernel_base, - ram_size - kernel_base, bswap_needed, -TARGET_PAGE_SIZE ); + kernel_size =load_aout (machine->kernel_filename, kernel_base, + machine->ram_size - kernel_base, + bswap_needed,TARGET_PAGE_SIZE );if (kernel_size <0 ) - kernel_size =load_image_targphys (kernel_filename, + kernel_size =load_image_targphys (machine->kernel_filename, kernel_base, - ram_size - kernel_base); + machine->ram_size - kernel_base);if (kernel_size <0 ) { -error_report ("could not load kernel '%s'" , kernel_filename); +error_report ("could not load kernel '%s'" , + machine->kernel_filename);exit (1 ); }/* load initrd */ -if (initrd_filename) { +if (machine->initrd_filename) { initrd_base =TARGET_PAGE_ALIGN (kernel_base + kernel_size +KERNEL_GAP ); - initrd_size =load_image_targphys (initrd_filename, initrd_base, - ram_size - initrd_base); + initrd_size =load_image_targphys (machine->initrd_filename, + initrd_base, + machine->ram_size - initrd_base);if (initrd_size <0 ) {error_report ("could not load initial ram disk '%s'" , - initrd_filename); + machine->initrd_filename);exit (1 ); } cmdline_base =TARGET_PAGE_ALIGN (initrd_base + initrd_size);
@@ -235,9 +226,10 @@ static void ppc_core99_init(MachineState *machine)/* We consider that NewWorld PowerMac never have any floppy drive * For now, OHW cannot boot from the network. */ -for (i =0 ; boot_device[i] !='\0' ; i++) { -if (boot_device[i] >='c' && boot_device[i] <='f' ) { - ppc_boot_device = boot_device[i]; +for (i =0 ; machine->boot_config.order[i] !='\0' ; i++) { +if (machine->boot_config.order[i] >='c' && + machine->boot_config.order[i] <='f' ) { + ppc_boot_device = machine->boot_config.order[i];break ; } }
@@ -254,8 +246,8 @@ static void ppc_core99_init(MachineState *machine)memory_region_add_subregion (get_system_memory (),0xf8000000 ,sysbus_mmio_get_region (s,0 )); - openpic_irqs =g_new0 (IrqLines, smp_cpus); -for (i =0 ; i < smp_cpus; i++) { + openpic_irqs =g_new0 (IrqLines, machine->smp.cpus); +for (i =0 ; i < machine->smp.cpus; i++) {/* Mac99 IRQ connection between OpenPIC outputs pins * and PowerPC input pins */
@@ -398,7 +390,7 @@ static void ppc_core99_init(MachineState *machine)/* OpenPIC */ s =SYS_BUS_DEVICE (pic_dev); k =0 ; -for (i =0 ; i < smp_cpus; i++) { +for (i =0 ; i < machine->smp.cpus; i++) {for (j =0 ; j <OPENPIC_OUTPUT_NB ; j++) {sysbus_connect_irq (s, k++, openpic_irqs[i].irq[j]); }
@@ -480,15 +472,16 @@ static void ppc_core99_init(MachineState *machine)sysbus_mmio_map (s,0 ,CFG_ADDR );sysbus_mmio_map (s,1 ,CFG_ADDR +2 ); -fw_cfg_add_i16 (fw_cfg,FW_CFG_NB_CPUS , (uint16_t )smp_cpus); +fw_cfg_add_i16 (fw_cfg,FW_CFG_NB_CPUS , (uint16_t )machine->smp.cpus);fw_cfg_add_i16 (fw_cfg,FW_CFG_MAX_CPUS , (uint16_t )machine->smp.max_cpus); -fw_cfg_add_i64 (fw_cfg,FW_CFG_RAM_SIZE , (uint64_t )ram_size); +fw_cfg_add_i64 (fw_cfg,FW_CFG_RAM_SIZE , (uint64_t )machine->ram_size);fw_cfg_add_i16 (fw_cfg,FW_CFG_MACHINE_ID , machine_arch);fw_cfg_add_i32 (fw_cfg,FW_CFG_KERNEL_ADDR , kernel_base);fw_cfg_add_i32 (fw_cfg,FW_CFG_KERNEL_SIZE , kernel_size); -if (kernel_cmdline) { +if (machine->kernel_cmdline) {fw_cfg_add_i32 (fw_cfg,FW_CFG_KERNEL_CMDLINE , cmdline_base); -pstrcpy_targphys ("cmdline" , cmdline_base,TARGET_PAGE_SIZE , kernel_cmdline); +pstrcpy_targphys ("cmdline" , cmdline_base,TARGET_PAGE_SIZE , + machine->kernel_cmdline); }else {fw_cfg_add_i32 (fw_cfg,FW_CFG_KERNEL_CMDLINE ,0 ); }
Signature · 1 line
2.30.4
PATCH v2 2/13 mac_oldworld: Drop some more variables
In reply to BALATON ZoltanDrop some more local variables additionally to commit b8df32555ce5 to match clean ups done to mac_newwold in previous patch.
--- hw/ppc/mac_oldworld.c | 43 +++++++++++++++++++++---------------------- 1 file changed, 21 insertions(+), 22 deletions(-)
hw/ppc/mac_oldworld.c +21 -22
@@ -80,14 +80,13 @@ static void ppc_heathrow_reset(void *opaque)static void ppc_heathrow_init (MachineState *machine) { -ram_addr_t ram_size = machine->ram_size;const char *bios_name = machine->firmware ?:PROM_FILENAME ; -const char *boot_device = machine->boot_config.order;PowerPCCPU *cpu =NULL ;CPUPPCState *env =NULL ;char *filename; -int i; +int i, bios_size;MemoryRegion *bios =g_new (MemoryRegion,1 ); +uint64_t bios_addr;uint32_t kernel_base, initrd_base, cmdline_base =0 ;int32_t kernel_size, initrd_size;PCIBus *pci_bus;
@@ -97,16 +96,13 @@ static void ppc_heathrow_init(MachineState *machine)SysBusDevice *s;DeviceState *dev, *pic_dev, *grackle_dev;BusState *adb_bus; -uint64_t bios_addr; -int bios_size; -unsigned int smp_cpus = machine->smp.cpus;uint16_t ppc_boot_device;DriveInfo *hd[MAX_IDE_BUS *MAX_IDE_DEVS ];void *fw_cfg;uint64_t tbfreq;/* init CPUs */ -for (i =0 ; i < smp_cpus; i++) { +for (i =0 ; i < machine->smp.cpus; i++) { cpu =POWERPC_CPU (cpu_create (machine->cpu_type)); env = &cpu->env;
@@ -116,9 +112,9 @@ static void ppc_heathrow_init(MachineState *machine) }/* allocate RAM */ -if (ram_size >2047 * MiB) { +if (machine->ram_size >2047 * MiB) {error_report ("Too much memory for this machine: %" PRId64" MB, " -"maximum 2047 MB" , ram_size / MiB); +"maximum 2047 MB" , machine->ram_size / MiB);exit (1 ); }
@@ -165,12 +161,12 @@ static void ppc_heathrow_init(MachineState *machine) NULL, NULL, 1, PPC_ELF_MACHINE, 0, 0);if (kernel_size <0 ) kernel_size =load_aout (machine->kernel_filename, kernel_base, - ram_size - kernel_base, bswap_needed, -TARGET_PAGE_SIZE ); + machine->ram_size - kernel_base, + bswap_needed,TARGET_PAGE_SIZE );if (kernel_size <0 ) kernel_size =load_image_targphys (machine->kernel_filename, kernel_base, - ram_size - kernel_base); + machine->ram_size - kernel_base);if (kernel_size <0 ) {error_report ("could not load kernel '%s'" , machine->kernel_filename);
@@ -182,7 +178,7 @@ static void ppc_heathrow_init(MachineState *machine) KERNEL_GAP); initrd_size =load_image_targphys (machine->initrd_filename, initrd_base, - ram_size - initrd_base); + machine->ram_size - initrd_base);if (initrd_size <0 ) {error_report ("could not load initial ram disk '%s'" , machine->initrd_filename);
@@ -201,19 +197,22 @@ static void ppc_heathrow_init(MachineState *machine) initrd_base =0 ; initrd_size =0 ; ppc_boot_device ='\0' ; -for (i =0 ; boot_device[i] !='\0' ; i++) { -/* TOFIX: for now, the second IDE channel is not properly +for (i =0 ; machine->boot_config.order[i] !='\0' ; i++) { +/* +* TOFIX: for now, the second IDE channel is not properly * used by OHW. The Mac floppy disk are not emulated. * For now, OHW cannot boot from the network. */ #if 0 -if (boot_device[i] >='a' && boot_device[i] <='f' ) { - ppc_boot_device = boot_device[i]; +if (machine->boot_config.order[i] >='a' && + machine->boot_config.order[i] <='f' ) { + ppc_boot_device = machine->boot_config.order[i];break ; }#else -if (boot_device[i] >='c' && boot_device[i] <='d' ) { - ppc_boot_device = boot_device[i]; +if (machine->boot_config.order[i] >='c' && + machine->boot_config.order[i] <='d' ) { + ppc_boot_device = machine->boot_config.order[i];break ; }#endif
@@ -266,7 +265,7 @@ static void ppc_heathrow_init(MachineState *machine) }/* Connect the heathrow PIC outputs to the 6xx bus */ -for (i =0 ; i < smp_cpus; i++) { +for (i =0 ; i < machine->smp.cpus; i++) {switch (PPC_INPUT (env)) {case PPC_FLAGS_INPUT_6xx:/* XXX: we register only 1 output pin for heathrow PIC */
@@ -323,9 +322,9 @@ static void ppc_heathrow_init(MachineState *machine)sysbus_mmio_map (s,0 ,CFG_ADDR );sysbus_mmio_map (s,1 ,CFG_ADDR +2 ); -fw_cfg_add_i16 (fw_cfg,FW_CFG_NB_CPUS , (uint16_t )smp_cpus); +fw_cfg_add_i16 (fw_cfg,FW_CFG_NB_CPUS , (uint16_t )machine->smp.cpus);fw_cfg_add_i16 (fw_cfg,FW_CFG_MAX_CPUS , (uint16_t )machine->smp.max_cpus); -fw_cfg_add_i64 (fw_cfg,FW_CFG_RAM_SIZE , (uint64_t )ram_size); +fw_cfg_add_i64 (fw_cfg,FW_CFG_RAM_SIZE , (uint64_t )machine->ram_size);fw_cfg_add_i16 (fw_cfg,FW_CFG_MACHINE_ID ,ARCH_HEATHROW );fw_cfg_add_i32 (fw_cfg,FW_CFG_KERNEL_ADDR , kernel_base);fw_cfg_add_i32 (fw_cfg,FW_CFG_KERNEL_SIZE , kernel_size);
Signature · 1 line
2.30.4
PATCH v2 3/13 mac_{old|new}world: Set tbfreq at declaration
In reply to BALATON ZoltanThe tbfreq variable is only set once in an if-else which can be done at the variable declaration saving some lines of code and making it simpler.
--- hw/ppc/mac_newworld.c | 9 +-------- hw/ppc/mac_oldworld.c | 9 +-------- 2 files changed, 2 insertions(+), 16 deletions(-)
hw/ppc/mac_newworld.c +1 -8
@@ -130,7 +130,7 @@ static void ppc_core99_init(MachineState *machine)DeviceState *dev, *pic_dev;DeviceState *uninorth_internal_dev =NULL , *uninorth_agp_dev =NULL ;hwaddr nvram_addr =0xFFF04000 ; -uint64_t tbfreq; +uint64_t tbfreq =kvm_enabled () ?kvmppc_get_tbfreq () :TBFREQ ;/* init CPUs */ for (i =0 ; i < machine->smp.cpus; i++) {
@@ -343,13 +343,6 @@ static void ppc_core99_init(MachineState *machine) has_adb = (core99_machine->via_config ==CORE99_VIA_CONFIG_CUDA || core99_machine->via_config ==CORE99_VIA_CONFIG_PMU_ADB ); -/* Timebase Frequency */ -if (kvm_enabled ()) { - tbfreq =kvmppc_get_tbfreq (); - }else { - tbfreq =TBFREQ ; - } -/* init basic PC hardware */ pci_bus =PCI_HOST_BRIDGE (uninorth_pci)->bus;
hw/ppc/mac_oldworld.c +1 -8
@@ -99,7 +99,7 @@ static void ppc_heathrow_init(MachineState *machine)uint16_t ppc_boot_device;DriveInfo *hd[MAX_IDE_BUS *MAX_IDE_DEVS ];void *fw_cfg; -uint64_t tbfreq; +uint64_t tbfreq =kvm_enabled () ?kvmppc_get_tbfreq () :TBFREQ ;/* init CPUs */ for (i =0 ; i < machine->smp.cpus; i++) {
@@ -223,13 +223,6 @@ static void ppc_heathrow_init(MachineState *machine) } } -/* Timebase Frequency */ -if (kvm_enabled ()) { - tbfreq =kvmppc_get_tbfreq (); - }else { - tbfreq =TBFREQ ; - } -/* Grackle PCI host bridge */ grackle_dev =qdev_new (TYPE_GRACKLE_PCI_HOST_BRIDGE );qdev_prop_set_uint32 (grackle_dev,"ofw-addr" ,0x80000000 );
Signature · 1 line
2.30.4
Re: [PATCH v2 03/13] mac_{old|new}world: Set tbfreq at declaration
Quoted 54 lines · BALATON Zoltan
The tbfreq variable is only set once in an if-else which can be done at the variable declaration saving some lines of code and making it simpler.
Signed-off-by BALATON Zoltan <[email protected]>--- hw/ppc/mac_newworld.c | 9 +-------- hw/ppc/mac_oldworld.c | 9 +-------- 2 files changed, 2 insertions(+), 16 deletions(-)hw/ppc/mac_newworld.c +1
-8@@ -130,7 +130,7 @@ static void ppc_core99_init(MachineState *machine)DeviceState *dev, *pic_dev;DeviceState *uninorth_internal_dev =NULL , *uninorth_agp_dev =NULL ;hwaddr nvram_addr =0xFFF04000 ; -uint64_t tbfreq; +uint64_t tbfreq =kvm_enabled () ?kvmppc_get_tbfreq () :TBFREQ ;/* init CPUs */ for (i =0 ; i < machine->smp.cpus; i++) {@@ -343,13 +343,6 @@ static void ppc_core99_init(MachineState *machine) has_adb = (core99_machine->via_config ==CORE99_VIA_CONFIG_CUDA || core99_machine->via_config ==CORE99_VIA_CONFIG_PMU_ADB ); -/* Timebase Frequency */ -if (kvm_enabled ()) { - tbfreq =kvmppc_get_tbfreq (); - }else { - tbfreq =TBFREQ ; - } -/* init basic PC hardware */ pci_bus =PCI_HOST_BRIDGE (uninorth_pci)->bus;hw/ppc/mac_oldworld.c +1
-1@@ -99,7 +99,7 @@ static void ppc_heathrow_init(MachineState *machine)uint16_t ppc_boot_device;DriveInfo *hd[MAX_IDE_BUS *MAX_IDE_DEVS ];void *fw_cfg; -uint64_t tbfreq; +uint64_t tbfreq =kvm_enabled () ?kvmppc_get_tbfreq () :TBFREQ ;/* init CPUs */ for (i =0 ; i < machine->smp.cpus; i++) {@@ -223,13 +223,6 @@ static void ppc_heathrow_init(MachineState *machine) } }
hw/ppc/mac_oldworld.c static void ppc_heathrow_init(MachineState *machine) · line 228
Quoted 10 lines
hw/ppc/mac_oldworld.c +0
-7-/* Timebase Frequency */ -if (kvm_enabled ()) { - tbfreq =kvmppc_get_tbfreq (); - }else { - tbfreq =TBFREQ ; - } -/* Grackle PCI host bridge */ grackle_dev =qdev_new (TYPE_GRACKLE_PCI_HOST_BRIDGE );qdev_prop_set_uint32 (grackle_dev,"ofw-addr" ,0x80000000 );
ATB,
Mark.
PATCH v2 4/13 mac_{old|new}world: Avoid else branch by setting default value
In reply to BALATON ZoltanSeveral variables are set in if-else branches where the else branch can be removed by setting a default value at the variable declaration which leads to simlpler code that is easier to follow.
--- hw/ppc/mac_newworld.c | 19 ++++--------------- hw/ppc/mac_oldworld.c | 18 ++++-------------- 2 files changed, 8 insertions(+), 29 deletions(-)
hw/ppc/mac_newworld.c +4 -15
@@ -111,11 +111,11 @@ static void ppc_core99_init(MachineState *machine)CPUPPCState *env =NULL ;char *filename;IrqLines *openpic_irqs; -int i, j, k, ppc_boot_device, machine_arch, bios_size; +int i, j, k, ppc_boot_device, machine_arch, bios_size =-1 ;const char *bios_name = machine->firmware ?:PROM_FILENAME ;MemoryRegion *bios =g_new (MemoryRegion,1 ); -hwaddr kernel_base, initrd_base, cmdline_base =0 ; -long kernel_size, initrd_size; +hwaddr kernel_base =0 , initrd_base =0 , cmdline_base =0 ; +long kernel_size =0 , initrd_size =0 ;UNINHostState *uninorth_pci;PCIBus *pci_bus;PCIDevice *macio;
@@ -165,8 +165,6 @@ static void ppc_core99_init(MachineState *machine) bios_size =load_image_targphys (filename,PROM_BASE ,PROM_SIZE ); }g_free (filename); - }else { - bios_size =-1 ; }if (bios_size <0 || bios_size >PROM_SIZE ) {error_report ("could not load PowerPC bios '%s'" , bios_name);
@@ -174,15 +172,12 @@ static void ppc_core99_init(MachineState *machine) }if (machine->kernel_filename) { -int bswap_needed; +int bswap_needed =0 ;#ifdef BSWAP_NEEDED bswap_needed =1 ; -#else - bswap_needed =0 ;#endif kernel_base =KERNEL_LOAD_ADDR ; - kernel_size =load_elf (machine->kernel_filename,NULL , translate_kernel_address,NULL ,NULL ,NULL ,NULL ,NULL ,1 ,PPC_ELF_MACHINE ,0 ,0 );
@@ -212,16 +207,10 @@ static void ppc_core99_init(MachineState *machine) } cmdline_base =TARGET_PAGE_ALIGN (initrd_base + initrd_size); }else { - initrd_base =0 ; - initrd_size =0 ; cmdline_base =TARGET_PAGE_ALIGN (kernel_base + kernel_size +KERNEL_GAP ); } ppc_boot_device ='m' ; }else { - kernel_base =0 ; - kernel_size =0 ; - initrd_base =0 ; - initrd_size =0 ; ppc_boot_device ='\0' ;/* We consider that NewWorld PowerMac never have any floppy drive * For now, OHW cannot boot from the network.
hw/ppc/mac_oldworld.c +4 -14
@@ -84,11 +84,11 @@ static void ppc_heathrow_init(MachineState *machine)PowerPCCPU *cpu =NULL ;CPUPPCState *env =NULL ;char *filename; -int i, bios_size; +int i, bios_size =-1 ;MemoryRegion *bios =g_new (MemoryRegion,1 );uint64_t bios_addr; -uint32_t kernel_base, initrd_base, cmdline_base =0 ; -int32_t kernel_size, initrd_size; +uint32_t kernel_base =0 , initrd_base =0 , cmdline_base =0 ; +int32_t kernel_size =0 , initrd_size =0 ;PCIBus *pci_bus;PCIDevice *macio;MACIOIDEState *macio_ide;
@@ -139,8 +139,6 @@ static void ppc_heathrow_init(MachineState *machine) bios_addr =PROM_BASE ; }g_free (filename); - }else { - bios_size =-1 ; }if (bios_size <0 || bios_addr -PROM_BASE + bios_size >PROM_SIZE ) {error_report ("could not load PowerPC bios '%s'" , bios_name);
@@ -148,12 +146,10 @@ static void ppc_heathrow_init(MachineState *machine) }if (machine->kernel_filename) { -int bswap_needed; +int bswap_needed =0 ;#ifdef BSWAP_NEEDED bswap_needed =1 ; -#else - bswap_needed =0 ;#endif kernel_base =KERNEL_LOAD_ADDR ; kernel_size = load_elf(machine->kernel_filename, NULL,
@@ -186,16 +182,10 @@ static void ppc_heathrow_init(MachineState *machine) } cmdline_base =TARGET_PAGE_ALIGN (initrd_base + initrd_size); }else { - initrd_base =0 ; - initrd_size =0 ; cmdline_base =TARGET_PAGE_ALIGN (kernel_base + kernel_size +KERNEL_GAP ); } ppc_boot_device ='m' ; }else { - kernel_base =0 ; - kernel_size =0 ; - initrd_base =0 ; - initrd_size =0 ; ppc_boot_device ='\0' ;for (i =0 ; machine->boot_config.order[i] !='\0' ; i++) {/*
Signature · 1 line
2.30.4
PATCH v2 5/13 mac_oldworld: Do not open code sysbus_mmio_map()
In reply to BALATON Zoltan--- hw/ppc/mac_oldworld.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-)
hw/ppc/mac_oldworld.c +2 -6
@@ -218,16 +218,12 @@ static void ppc_heathrow_init(MachineState *machine)qdev_prop_set_uint32 (grackle_dev,"ofw-addr" ,0x80000000 ); s =SYS_BUS_DEVICE (grackle_dev);sysbus_realize_and_unref (s, &error_fatal); -sysbus_mmio_map (s,0 ,GRACKLE_BASE );sysbus_mmio_map (s,1 ,GRACKLE_BASE +0x200000 );/* PCI hole */ -memory_region_add_subregion (get_system_memory (),0x80000000ULL , -sysbus_mmio_get_region (s,2 )); +sysbus_mmio_map (s,2 ,0x80000000 );/* Register 2 MB of ISA IO space */ -memory_region_add_subregion (get_system_memory (),0xfe000000 , -sysbus_mmio_get_region (s,3 )); - +sysbus_mmio_map (s,3 ,0xfe000000 ); pci_bus =PCI_HOST_BRIDGE (grackle_dev)->bus;/* MacIO */
Signature · 1 line
2.30.4
Re: [PATCH v2 05/13] mac_oldworld: Do not open code sysbus_mmio_map()
Quoted 18 lines · BALATON Zoltan
Signed-off-by BALATON Zoltan <[email protected]>--- hw/ppc/mac_oldworld.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-)hw/ppc/mac_oldworld.c +0
-2@@ -218,16 +218,12 @@ static void ppc_heathrow_init(MachineState *machine)qdev_prop_set_uint32 (grackle_dev,"ofw-addr" ,0x80000000 ); s =SYS_BUS_DEVICE (grackle_dev);sysbus_realize_and_unref (s, &error_fatal); -sysbus_mmio_map (s,0 ,GRACKLE_BASE );sysbus_mmio_map (s,1 ,GRACKLE_BASE +0x200000 );/* PCI hole */ - memory_region_add_subregion(get_system_memory(), 0x80000000ULL,
hw/ppc/mac_oldworld.c static void ppc_heathrow_init(MachineState *machine) · line 229
Quoted 10 lines
hw/ppc/mac_oldworld.c +2
-4- sysbus_mmio_get_region(s, 2)); +sysbus_mmio_map (s,2 ,0x80000000 );/* Register 2 MB of ISA IO space */ -memory_region_add_subregion (get_system_memory (),0xfe000000 , -sysbus_mmio_get_region (s,3 )); - +sysbus_mmio_map (s,3 ,0xfe000000 ); pci_bus =PCI_HOST_BRIDGE (grackle_dev)->bus;/* MacIO */
Please drop this patch for now. The code was written on assumption that both sysbus and sysbus devices would be going away soon, and there are certainly discussions under way about coming up with a migration strategy to allow them to be completely removed.
ATB,
Mark.
Re: [PATCH v2 05/13] mac_oldworld: Do not open code sysbus_mmio_map()
Quoted 23 lines · Mark Cave-Ayland
Quoted 21 lines · BALATON Zoltan
Signed-off-by BALATON Zoltan <[email protected]>--- hw/ppc/mac_oldworld.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-)hw/ppc/mac_oldworld.c +1
-3@@ -218,16 +218,12 @@ static void ppc_heathrow_init(MachineState *machine)qdev_prop_set_uint32 (grackle_dev,"ofw-addr" ,0x80000000 ); s =SYS_BUS_DEVICE (grackle_dev);sysbus_realize_and_unref (s, &error_fatal); -sysbus_mmio_map (s,0 ,GRACKLE_BASE );sysbus_mmio_map (s,1 ,GRACKLE_BASE +0x200000 );/* PCI hole */ -memory_region_add_subregion (get_system_memory (),0x80000000ULL , -sysbus_mmio_get_region (s,2 )); +sysbus_mmio_map (s,2 ,0x80000000 );/* Register 2 MB of ISA IO space */
Quoted 8 lines
hw/ppc/mac_oldworld.c static void ppc_heathrow_init(MachineState *machine) · line 229
Quoted 6 lines
hw/ppc/mac_oldworld.c +1
-3-memory_region_add_subregion (get_system_memory (),0xfe000000 , -sysbus_mmio_get_region (s,3 )); - +sysbus_mmio_map (s,3 ,0xfe000000 ); pci_bus =PCI_HOST_BRIDGE (grackle_dev)->bus;/* MacIO */ Please drop this patch for now. The code was written on assumption that both sysbus and sysbus devices would be going away soon, and there are certainly discussions under way about coming up with a migration strategy to allow them to be completely removed.
This patch actually simplifies transition from sysbus to whatever else will be decided because then you'll surely have a way to replace sysbus_mmio_map() that's used everywhere else with something. This file now has both sysbus_mmio_map and sysbus mmio_get_region so using only one will make it easier to convert it and until then it's easier to read so I don't agree with this suggestion and want to stick to these patches (same with uninorth). Please reconsider your decision.
Regards,
BALATON Zoltan
Re: [PATCH v2 05/13] mac_oldworld: Do not open code sysbus_mmio_map()
Quoted 33 lines · BALATON Zoltan
Quoted 23 lines · Mark Cave-Ayland
Quoted 21 lines · BALATON Zoltan
Signed-off-by BALATON Zoltan <[email protected]>---
hw/ppc/mac_oldworld.c| 8 ++------1 file changed, 2 insertions(+), 6 deletions(-)hw/ppc/mac_oldworld.c +1
-3@@ -218,16 +218,12 @@ static void ppc_heathrow_init(MachineState *machine) qdev_prop_set_uint32(grackle_dev, "ofw-addr", 0x80000000); s = SYS_BUS_DEVICE(grackle_dev); sysbus_realize_and_unref(s, &error_fatal); - sysbus_mmio_map(s, 0, GRACKLE_BASE); sysbus_mmio_map(s, 1, GRACKLE_BASE + 0x200000); /* PCI hole */ - memory_region_add_subregion(get_system_memory(), 0x80000000ULL, - sysbus_mmio_get_region(s, 2)); + sysbus_mmio_map(s, 2, 0x80000000); /* Register 2 MB of ISA IO space */Quoted 8 lines
hw/ppc/mac_oldworld.c static void ppc_heathrow_init(MachineState *machine) · line 229
Quoted 6 lines
hw/ppc/mac_oldworld.c +1
-3- memory_region_add_subregion(get_system_memory(), 0xfe000000, - sysbus_mmio_get_region(s, 3)); - + sysbus_mmio_map(s, 3, 0xfe000000); pci_bus = PCI_HOST_BRIDGE(grackle_dev)->bus; /* MacIO */Please drop this patch for now. The code was written on assumption that both sysbus and sysbus devices would be going away soon, and there are certainly discussions under way about coming up with a migration strategy to allow them to be completely removed.
Quoted 1 line
This patch actually simplifies transition from sysbus to whatever else will be decided because then you'll surely have a way to replace
sysbus_mmio_map()that's used everywhere else with something. This file now has bothsysbus_mmio_mapand sysbusmmio_get_regionso using only one will make it easier to convert it and until then it's easier to read so I don't agree with this suggestion and want to stick to these patches (same with uninorth). Please reconsider your decision.
When sysbus eventually goes then mapping devices will most likely be handled by the memory API as above rather than using an explicit _map() API, so let's keep that rather than converting everything to use sysbus_mmio_map().
ATB,
Mark.
Re: [PATCH v2 05/13] mac_oldworld: Do not open code sysbus_mmio_map()
Quoted 36 lines · Mark Cave-Ayland
Quoted 34 lines · BALATON Zoltan
Quoted 32 lines · Mark Cave-Ayland
Quoted 18 lines · BALATON Zoltan
Signed-off-by BALATON Zoltan <[email protected]>---
hw/ppc/mac_oldworld.c| 8 ++------1 file changed, 2 insertions(+), 6 deletions(-)hw/ppc/mac_oldworld.c +0
-1@@ -218,16 +218,12 @@ static void ppc_heathrow_init(MachineState *machine) qdev_prop_set_uint32(grackle_dev, "ofw-addr", 0x80000000); s = SYS_BUS_DEVICE(grackle_dev); sysbus_realize_and_unref(s, &error_fatal); - sysbus_mmio_map(s, 0, GRACKLE_BASE); sysbus_mmio_map(s, 1, GRACKLE_BASE + 0x200000); /* PCI hole */hw/ppc/mac_oldworld.c static void ppc_heathrow_init(MachineState · line 229
Quoted 10 lines
hw/ppc/mac_oldworld.c +2
-5- memory_region_add_subregion(get_system_memory(), 0x80000000ULL, - sysbus_mmio_get_region(s, 2)); + sysbus_mmio_map(s, 2, 0x80000000); /* Register 2 MB of ISA IO space */ - memory_region_add_subregion(get_system_memory(), 0xfe000000, - sysbus_mmio_get_region(s, 3)); - + sysbus_mmio_map(s, 3, 0xfe000000); pci_bus = PCI_HOST_BRIDGE(grackle_dev)->bus; /* MacIO */Please drop this patch for now. The code was written on assumption that both sysbus and sysbus devices would be going away soon, and there are certainly discussions under way about coming up with a migration strategy to allow them to be completely removed.
Quoted 3 lines
Quoted 1 line
This patch actually simplifies transition from sysbus to whatever else will be decided because then you'll surely have a way to replace
sysbus_mmio_map()that's used everywhere else with something. This file now has bothsysbus_mmio_mapand sysbusmmio_get_regionso using only one will make it easier to convert it and until then it's easier to read so I don't agree with this suggestion and want to stick to these patches (same with uninorth). Please reconsider your decision.When sysbus eventually goes then mapping devices will most likely be handled by the memory API as above rather than using an explicit
_map()API, so let's keep that rather than converting everything to usesysbus_mmio_map().
Hopefully not as that would make code very unreadable and hard to get for people unfamiliar with QOM so to not scare off potential contributors please invent an easier way, at least define a macro or a function for such common operation when sysus goes away. But it may be a long time until sysbus will be gone and until then we leave this code inconsistent now using two ways to map areaswhich I don't agree with but since you cannot be convinced I've dropped these changes for now.
Regards,
BALATON Zoltan
PATCH v2 6/13 mac_newworld: Simplify creation of Uninorth devices
In reply to BALATON ZoltanAvoid open coding sysbus_mmio_map() and map regions in ascending otder. Reorganise code a bit to avoid some casts.
--- hw/ppc/mac_newworld.c | 42 +++++++++++++++++------------------------- 1 file changed, 17 insertions(+), 25 deletions(-)
hw/ppc/mac_newworld.c +17 -25
@@ -228,13 +228,6 @@ static void ppc_core99_init(MachineState *machine) } } -/* UniN init */ - dev =qdev_new (TYPE_UNI_NORTH ); - s =SYS_BUS_DEVICE (dev); -sysbus_realize_and_unref (s, &error_fatal); -memory_region_add_subregion (get_system_memory (),0xf8000000 , -sysbus_mmio_get_region (s,0 )); - openpic_irqs =g_new0 (IrqLines, machine->smp.cpus);for (i =0 ; i < machine->smp.cpus; i++) {/* Mac99 IRQ connection between OpenPIC outputs pins
@@ -275,24 +268,27 @@ static void ppc_core99_init(MachineState *machine) } } +/* UniN init */ + s =SYS_BUS_DEVICE (qdev_new (TYPE_UNI_NORTH )); +sysbus_realize_and_unref (s, &error_fatal); +sysbus_mmio_map (s,0 ,0xf8000000 ); +if (PPC_INPUT (env) ==PPC_FLAGS_INPUT_970 ) { + machine_arch =ARCH_MAC99_U3 ;/* 970 gets a U3 bus */ /* Uninorth AGP bus */ dev =qdev_new (TYPE_U3_AGP_HOST_BRIDGE ); -sysbus_realize_and_unref (SYS_BUS_DEVICE (dev), &error_fatal); uninorth_pci =U3_AGP_HOST_BRIDGE (dev); s =SYS_BUS_DEVICE (dev); -/* PCI hole */ -memory_region_add_subregion (get_system_memory (),0x80000000ULL , -sysbus_mmio_get_region (s,2 )); -/* Register 8 MB of ISA IO space */ -memory_region_add_subregion (get_system_memory (),0xf2000000 , -sysbus_mmio_get_region (s,3 )); +sysbus_realize_and_unref (s, &error_fatal);sysbus_mmio_map (s,0 ,0xf0800000 );sysbus_mmio_map (s,1 ,0xf0c00000 ); - - machine_arch =ARCH_MAC99_U3 ; +/* PCI hole */ +sysbus_mmio_map (s,2 ,0x80000000 ); +/* Register 8 MB of ISA IO space */ +sysbus_mmio_map (s,3 ,0xf2000000 ); }else { + machine_arch =ARCH_MAC99 ;/* Use values found on a real PowerMac */ /* Uninorth AGP bus */ uninorth_agp_dev =qdev_new (TYPE_UNI_NORTH_AGP_HOST_BRIDGE );
@@ -312,19 +308,15 @@ static void ppc_core99_init(MachineState *machine)/* Uninorth main bus */ dev =qdev_new (TYPE_UNI_NORTH_PCI_HOST_BRIDGE );qdev_prop_set_uint32 (dev,"ofw-addr" ,0xf2000000 ); -sysbus_realize_and_unref (SYS_BUS_DEVICE (dev), &error_fatal); uninorth_pci =UNI_NORTH_PCI_HOST_BRIDGE (dev); s =SYS_BUS_DEVICE (dev); -/* PCI hole */ -memory_region_add_subregion (get_system_memory (),0x80000000ULL , -sysbus_mmio_get_region (s,2 )); -/* Register 8 MB of ISA IO space */ -memory_region_add_subregion (get_system_memory (),0xf2000000 , -sysbus_mmio_get_region (s,3 )); +sysbus_realize_and_unref (s, &error_fatal);sysbus_mmio_map (s,0 ,0xf2800000 );sysbus_mmio_map (s,1 ,0xf2c00000 ); - - machine_arch =ARCH_MAC99 ; +/* PCI hole */ +sysbus_mmio_map (s,2 ,0x80000000 ); +/* Register 8 MB of ISA IO space */ +sysbus_mmio_map (s,3 ,0xf2000000 ); } machine->usb |=defaults_enabled () && !machine->usb_disabled;
Signature · 1 line
2.30.4
Re: [PATCH v2 06/13] mac_newworld: Simplify creation of Uninorth devices
Quoted 78 lines · BALATON Zoltan
Avoid open coding
sysbus_mmio_map()and map regions in ascending otder. Reorganise code a bit to avoid some casts.Signed-off-by BALATON Zoltan <[email protected]>--- hw/ppc/mac_newworld.c | 42 +++++++++++++++++------------------------- 1 file changed, 17 insertions(+), 25 deletions(-)hw/ppc/mac_newworld.c +13
-23@@ -228,13 +228,6 @@ static void ppc_core99_init(MachineState *machine) } } -/* UniN init */ - dev =qdev_new (TYPE_UNI_NORTH ); - s =SYS_BUS_DEVICE (dev); -sysbus_realize_and_unref (s, &error_fatal); -memory_region_add_subregion (get_system_memory (),0xf8000000 , -sysbus_mmio_get_region (s,0 )); - openpic_irqs =g_new0 (IrqLines, machine->smp.cpus);for (i =0 ; i < machine->smp.cpus; i++) {/* Mac99 IRQ connection between OpenPIC outputs pins @@ -275,24 +268,27 @@ static void ppc_core99_init(MachineState *machine) } } +/* UniN init */ + s =SYS_BUS_DEVICE (qdev_new (TYPE_UNI_NORTH )); +sysbus_realize_and_unref (s, &error_fatal); +sysbus_mmio_map (s,0 ,0xf8000000 ); +if (PPC_INPUT (env) ==PPC_FLAGS_INPUT_970 ) { + machine_arch =ARCH_MAC99_U3 ;/* 970 gets a U3 bus */ /* Uninorth AGP bus */ dev =qdev_new (TYPE_U3_AGP_HOST_BRIDGE ); -sysbus_realize_and_unref (SYS_BUS_DEVICE (dev), &error_fatal); uninorth_pci =U3_AGP_HOST_BRIDGE (dev); s =SYS_BUS_DEVICE (dev); -/* PCI hole */ -memory_region_add_subregion (get_system_memory (),0x80000000ULL , -sysbus_mmio_get_region (s,2 )); -/* Register 8 MB of ISA IO space */ -memory_region_add_subregion (get_system_memory (),0xf2000000 , -sysbus_mmio_get_region (s,3 )); +sysbus_realize_and_unref (s, &error_fatal);sysbus_mmio_map (s,0 ,0xf0800000 );sysbus_mmio_map (s,1 ,0xf0c00000 ); - - machine_arch =ARCH_MAC99_U3 ; +/* PCI hole */ +sysbus_mmio_map (s,2 ,0x80000000 ); +/* Register 8 MB of ISA IO space */ +sysbus_mmio_map (s,3 ,0xf2000000 ); }else { + machine_arch =ARCH_MAC99 ;/* Use values found on a real PowerMac */ /* Uninorth AGP bus */ uninorth_agp_dev =qdev_new (TYPE_UNI_NORTH_AGP_HOST_BRIDGE );@@ -312,19 +308,15 @@ static void ppc_core99_init(MachineState *machine)/* Uninorth main bus */ dev =qdev_new (TYPE_UNI_NORTH_PCI_HOST_BRIDGE );qdev_prop_set_uint32 (dev,"ofw-addr" ,0xf2000000 ); -sysbus_realize_and_unref (SYS_BUS_DEVICE (dev), &error_fatal); uninorth_pci =UNI_NORTH_PCI_HOST_BRIDGE (dev); s =SYS_BUS_DEVICE (dev); -/* PCI hole */ -memory_region_add_subregion (get_system_memory (),0x80000000ULL , -sysbus_mmio_get_region (s,2 )); -/* Register 8 MB of ISA IO space */ -memory_region_add_subregion (get_system_memory (),0xf2000000 , -sysbus_mmio_get_region (s,3 )); +sysbus_realize_and_unref (s, &error_fatal);sysbus_mmio_map (s,0 ,0xf2800000 );
hw/ppc/mac_newworld.c static void ppc_core99_init(MachineState *machine) · line 322
Quoted 10 lines
hw/ppc/mac_newworld.c +4
-2sysbus_mmio_map (s,1 ,0xf2c00000 ); - - machine_arch =ARCH_MAC99 ; +/* PCI hole */ +sysbus_mmio_map (s,2 ,0x80000000 ); +/* Register 8 MB of ISA IO space */ +sysbus_mmio_map (s,3 ,0xf2000000 ); } machine->usb |=defaults_enabled () && !machine->usb_disabled;
Same comment here re: sysbus. Also the patch seems correct here, but it is worth noting that the PCI bus initialisation is order sensitive: the last bus created is the one that becomes the default PCI bus for -device, so changing this would break quite a few command lines...
ATB,
Mark.
Re: [PATCH v2 06/13] mac_newworld: Simplify creation of Uninorth devices
Cc'ing CLI refactor team.
Quoted 5 lines · Mark Cave-Ayland
Quoted 3 lines · BALATON Zoltan
Avoid open coding
sysbus_mmio_map()and map regions in ascending otder. Reorganise code a bit to avoid some casts.
Quoted 7 lines
Quoted 4 lines
Signed-off-by BALATON Zoltan <[email protected]>---
hw/ppc/mac_newworld.c| 42 +++++++++++++++++-------------------------1 file changed, 17 insertions(+), 25 deletions(-)Same comment here re: sysbus. Also the patch seems correct here, but it is worth noting that the PCI bus initialisation is order sensitive: the last bus created is the one that becomes the default PCI bus for -device, so changing this would break quite a few command lines...
Eh, I was not aware of this API fragility. So when using -device without expliciting the 'bus' key, the default is the latest bus created... OK.
Re: [PATCH v2 06/13] mac_newworld: Simplify creation of Uninorth devices
Quoted 13 lines · Philippe Mathieu-Daudé
Cc'ing CLI refactor team.
Quoted 9 lines · Mark Cave-Ayland
Quoted 7 lines · BALATON Zoltan
Avoid open coding
sysbus_mmio_map()and map regions in ascending otder. Reorganise code a bit to avoid some casts.Signed-off-by BALATON Zoltan <[email protected]>---
hw/ppc/mac_newworld.c| 42 +++++++++++++++++-------------------------1 file changed, 17 insertions(+), 25 deletions(-)
Quoted 5 lines
Quoted 2 lines
Same comment here re: sysbus. Also the patch seems correct here, but it is worth noting that the PCI bus initialisation is order sensitive: the last bus created is the one that becomes the default PCI bus for -device, so changing this would break quite a few command lines...
Eh, I was not aware of this API fragility. So when using -device without expliciting the 'bus' key, the default is the latest bus created... OK.
Yes, our external interface is in part defined implicitly by the order in board code execution. It goes deeper than just CLI, I'm afraid.
Omitting bus= is a convenience feature for users. It's clearly useful. But what's the default? We walk the qdev tree rooted at the main system bus looking for a bus of suitable bus type that is not full, or else of suitable type that is full. See qdev_find_recursive(). The tree walk visits children in creation order. Therefore, bus creation order is ABI.
Related: bus names.
For user-created buses, the bus name depends on the owning device's qdev ID (specified with id=ID). If it has none, the system picks a bus name; more on that below. Else, it is ID.N, where N counts from zero. When a device creates multiple buses of the same type, its bus creation order is ABI.
For onboard devices, the bus name can be specified by board code. If board code elects not to, the system picks a name.
System-picked names are TYPE.N, where TYPE is the bus type name such as "pci" or "isa", and N counts from zero separately for each type. Again, bus creation order is ABI.
This is qbus_init_internal().
Letting users omit qdev IDs is a convenience feature.
Letting developers delegate bus name picking to the system is also a convenience feature. Without it, we'd need bus name logic in board code and not just qbus_init_internal().
I dislike implicit ABI definitions.
Rarely met a QEMU convenience feature that didn't bite us in the posterior later (the sensitivity of my posterior may well cloud my memory, though).
Re: [PATCH v2 06/13] mac_newworld: Simplify creation of Uninorth devices
Quoted 24 lines · Markus Armbruster
Quoted 13 lines · Philippe Mathieu-Daudé
Cc'ing CLI refactor team.
Quoted 9 lines · Mark Cave-Ayland
Quoted 7 lines · BALATON Zoltan
Avoid open coding
sysbus_mmio_map()and map regions in ascending otder. Reorganise code a bit to avoid some casts.Signed-off-by BALATON Zoltan <[email protected]>---
hw/ppc/mac_newworld.c| 42 +++++++++++++++++-------------------------1 file changed, 17 insertions(+), 25 deletions(-)Quoted 5 lines
Quoted 2 lines
Same comment here re: sysbus. Also the patch seems correct here, but it is worth noting that the PCI bus initialisation is order sensitive: the last bus created is the one that becomes the default PCI bus for -device, so changing this would break quite a few command lines...
Eh, I was not aware of this API fragility. So when using -device without expliciting the 'bus' key, the default is the latest bus created... OK.
Yes, our external interface is in part defined implicitly by the order in board code execution. It goes deeper than just CLI, I'm afraid.
Quoted 6 lines
Omitting bus= is a convenience feature for users. It's clearly useful. But what's the default? We walk the qdev tree rooted at the main system bus looking for a bus of suitable bus type that is not full, or else of suitable type that is full. See
qdev_find_recursive(). The tree walk visits children in creation order. Therefore, bus creation order is ABI.
There are different levels of ABI importance, however, depending on which target/machine type we're talking about.
The critically important ABI is for anything that is part of, or used by, machine types which are versioned. These are our top tier platforms, typically associated with KVM and mgmt apps expect continuity from us, and will usually be fully explicit in their configuration.
The less important ABI is for the non-versioned machine types. These are typically associated with emulating legacy hardware platforms. Users are more likely to use the convenience syntax, leaving out as many implicit properties as possible.
ppc/mac_newworld is one of the latter class.
It is still desirable to avoid gratuitous changes that are likely to break existing user's configurations of QEMU, but it is not quite so critical. If someone can make a good case for why it is better, it can be considered
With regards,
Daniel
Signature · 3 lines
|: https://berrange.com -o- https://www.flickr.com/photos/dberrange :| |: https://libvirt.org -o- https://fstop138.berrange.com :| |: https://entangle-photo.org -o- https://www.instagram.com/dberrange :|
PATCH v2 7/13 mac_{old|new}world: Reduce number of QOM casts
In reply to BALATON ZoltanBy storing the device pointers in a variable with the right type the number of QOM casts can be reduced which also makes the code more readable.
--- hw/ppc/mac_newworld.c | 61 ++++++++++++++++++++----------------------- hw/ppc/mac_oldworld.c | 26 ++++++++---------- 2 files changed, 39 insertions(+), 48 deletions(-)
hw/ppc/mac_newworld.c +28 -33
@@ -116,18 +116,16 @@ static void ppc_core99_init(MachineState *machine)MemoryRegion *bios =g_new (MemoryRegion,1 );hwaddr kernel_base =0 , initrd_base =0 , cmdline_base =0 ;long kernel_size =0 , initrd_size =0 ; -UNINHostState *uninorth_pci;PCIBus *pci_bus; -PCIDevice *macio; -ESCCState *escc;bool has_pmu, has_adb; +Object *macio;MACIOIDEState *macio_ide;BusState *adb_bus;MacIONVRAMState *nvr;DriveInfo *hd[MAX_IDE_BUS *MAX_IDE_DEVS ];void *fw_cfg;SysBusDevice *s; -DeviceState *dev, *pic_dev; +DeviceState *dev, *pic_dev, *uninorth_pci_dev;DeviceState *uninorth_internal_dev =NULL , *uninorth_agp_dev =NULL ;hwaddr nvram_addr =0xFFF04000 ;uint64_t tbfreq =kvm_enabled () ?kvmppc_get_tbfreq () :TBFREQ ;
@@ -229,6 +227,7 @@ static void ppc_core99_init(MachineState *machine) } openpic_irqs =g_new0 (IrqLines, machine->smp.cpus); + dev =DEVICE (cpu);for (i =0 ; i < machine->smp.cpus; i++) {/* Mac99 IRQ connection between OpenPIC outputs pins * and PowerPC input pins
@@ -236,30 +235,30 @@ static void ppc_core99_init(MachineState *machine)switch (PPC_INPUT (env)) {case PPC_FLAGS_INPUT_6xx: openpic_irqs[i].irq[OPENPIC_OUTPUT_INT ] = -qdev_get_gpio_in (DEVICE (cpu), PPC6xx_INPUT_INT); +qdev_get_gpio_in (dev, PPC6xx_INPUT_INT); openpic_irqs[i].irq[OPENPIC_OUTPUT_CINT ] = -qdev_get_gpio_in (DEVICE (cpu), PPC6xx_INPUT_INT); +qdev_get_gpio_in (dev, PPC6xx_INPUT_INT); openpic_irqs[i].irq[OPENPIC_OUTPUT_MCK ] = -qdev_get_gpio_in (DEVICE (cpu), PPC6xx_INPUT_MCP); +qdev_get_gpio_in (dev, PPC6xx_INPUT_MCP);/* Not connected ? */ openpic_irqs[i].irq[OPENPIC_OUTPUT_DEBUG ] =NULL ;/* Check this */ openpic_irqs[i].irq[OPENPIC_OUTPUT_RESET ] = -qdev_get_gpio_in (DEVICE (cpu), PPC6xx_INPUT_HRESET); +qdev_get_gpio_in (dev, PPC6xx_INPUT_HRESET);break ;#if defined(TARGET_PPC64 )case PPC_FLAGS_INPUT_970 : openpic_irqs[i].irq[OPENPIC_OUTPUT_INT ] = -qdev_get_gpio_in (DEVICE (cpu),PPC970_INPUT_INT ); +qdev_get_gpio_in (dev,PPC970_INPUT_INT ); openpic_irqs[i].irq[OPENPIC_OUTPUT_CINT ] = -qdev_get_gpio_in (DEVICE (cpu),PPC970_INPUT_INT ); +qdev_get_gpio_in (dev,PPC970_INPUT_INT ); openpic_irqs[i].irq[OPENPIC_OUTPUT_MCK ] = -qdev_get_gpio_in (DEVICE (cpu),PPC970_INPUT_MCP ); +qdev_get_gpio_in (dev,PPC970_INPUT_MCP );/* Not connected ? */ openpic_irqs[i].irq[OPENPIC_OUTPUT_DEBUG ] =NULL ;/* Check this */ openpic_irqs[i].irq[OPENPIC_OUTPUT_RESET ] = -qdev_get_gpio_in (DEVICE (cpu),PPC970_INPUT_HRESET ); +qdev_get_gpio_in (dev,PPC970_INPUT_HRESET );break ;#endif /* defined(TARGET_PPC64) */ default :
@@ -277,9 +276,8 @@ static void ppc_core99_init(MachineState *machine) machine_arch =ARCH_MAC99_U3 ;/* 970 gets a U3 bus */ /* Uninorth AGP bus */ - dev =qdev_new (TYPE_U3_AGP_HOST_BRIDGE ); - uninorth_pci =U3_AGP_HOST_BRIDGE (dev); - s =SYS_BUS_DEVICE (dev); + uninorth_pci_dev =qdev_new (TYPE_U3_AGP_HOST_BRIDGE ); + s =SYS_BUS_DEVICE (uninorth_pci_dev);sysbus_realize_and_unref (s, &error_fatal);sysbus_mmio_map (s,0 ,0xf0800000 );sysbus_mmio_map (s,1 ,0xf0c00000 );
@@ -306,10 +304,9 @@ static void ppc_core99_init(MachineState *machine)sysbus_mmio_map (s,1 ,0xf4c00000 );/* Uninorth main bus */ - dev =qdev_new (TYPE_UNI_NORTH_PCI_HOST_BRIDGE ); -qdev_prop_set_uint32 (dev,"ofw-addr" ,0xf2000000 ); - uninorth_pci =UNI_NORTH_PCI_HOST_BRIDGE (dev); - s =SYS_BUS_DEVICE (dev); + uninorth_pci_dev =qdev_new (TYPE_UNI_NORTH_PCI_HOST_BRIDGE ); +qdev_prop_set_uint32 (uninorth_pci_dev,"ofw-addr" ,0xf2000000 ); + s =SYS_BUS_DEVICE (uninorth_pci_dev);sysbus_realize_and_unref (s, &error_fatal);sysbus_mmio_map (s,0 ,0xf2800000 );sysbus_mmio_map (s,1 ,0xf2c00000 );
@@ -325,24 +322,24 @@ static void ppc_core99_init(MachineState *machine) core99_machine->via_config == CORE99_VIA_CONFIG_PMU_ADB);/* init basic PC hardware */ - pci_bus =PCI_HOST_BRIDGE (uninorth_pci)->bus; + pci_bus =PCI_HOST_BRIDGE (uninorth_pci_dev)->bus;/* MacIO */ - macio =pci_new (-1 ,TYPE_NEWWORLD_MACIO ); + macio =OBJECT (pci_new (-1 ,TYPE_NEWWORLD_MACIO )); dev =DEVICE (macio);qdev_prop_set_uint64 (dev,"frequency" , tbfreq);qdev_prop_set_bit (dev,"has-pmu" , has_pmu);qdev_prop_set_bit (dev,"has-adb" , has_adb); - escc =ESCC (object_resolve_path_component (OBJECT (macio),"escc" )); -qdev_prop_set_chr (DEVICE (escc),"chrA" ,serial_hd (0 )); -qdev_prop_set_chr (DEVICE (escc),"chrB" ,serial_hd (1 )); + dev =DEVICE (object_resolve_path_component (macio,"escc" )); +qdev_prop_set_chr (dev,"chrA" ,serial_hd (0 )); +qdev_prop_set_chr (dev,"chrB" ,serial_hd (1 )); -pci_realize_and_unref (macio, pci_bus, &error_fatal); +pci_realize_and_unref (PCI_DEVICE (macio), pci_bus, &error_fatal); - pic_dev =DEVICE (object_resolve_path_component (OBJECT (macio),"pic" )); + pic_dev =DEVICE (object_resolve_path_component (macio,"pic" ));for (i =0 ; i <4 ; i++) { -qdev_connect_gpio_out (DEVICE (uninorth_pci), i, +qdev_connect_gpio_out (uninorth_pci_dev, i,qdev_get_gpio_in (pic_dev,0x1b + i)); }
@@ -374,19 +371,17 @@ static void ppc_core99_init(MachineState *machine)/* We only emulate 2 out of 3 IDE controllers for now */ ide_drive_get (hd,ARRAY_SIZE (hd)); - macio_ide =MACIO_IDE (object_resolve_path_component (OBJECT (macio), -"ide[0]" )); + macio_ide =MACIO_IDE (object_resolve_path_component (macio,"ide[0]" ));macio_ide_init_drives (macio_ide, hd); - macio_ide =MACIO_IDE (object_resolve_path_component (OBJECT (macio), -"ide[1]" )); + macio_ide =MACIO_IDE (object_resolve_path_component (macio,"ide[1]" ));macio_ide_init_drives (macio_ide, &hd[MAX_IDE_DEVS ]);if (has_adb) {if (has_pmu) { - dev =DEVICE (object_resolve_path_component (OBJECT (macio),"pmu" )); + dev =DEVICE (object_resolve_path_component (macio,"pmu" )); }else { - dev =DEVICE (object_resolve_path_component (OBJECT (macio),"cuda" )); + dev =DEVICE (object_resolve_path_component (macio,"cuda" )); } adb_bus =qdev_get_child_bus (dev,"adb.0" );
hw/ppc/mac_oldworld.c +11 -15
@@ -90,9 +90,8 @@ static void ppc_heathrow_init(MachineState *machine)uint32_t kernel_base =0 , initrd_base =0 , cmdline_base =0 ;int32_t kernel_size =0 , initrd_size =0 ;PCIBus *pci_bus; -PCIDevice *macio; +Object *macio;MACIOIDEState *macio_ide; -ESCCState *escc;SysBusDevice *s;DeviceState *dev, *pic_dev, *grackle_dev;BusState *adb_bus;
@@ -227,17 +226,16 @@ static void ppc_heathrow_init(MachineState *machine) pci_bus =PCI_HOST_BRIDGE (grackle_dev)->bus;/* MacIO */ - macio =pci_new (PCI_DEVFN (16 ,0 ),TYPE_OLDWORLD_MACIO ); - dev =DEVICE (macio); -qdev_prop_set_uint64 (dev,"frequency" , tbfreq); + macio =OBJECT (pci_new (PCI_DEVFN (16 ,0 ),TYPE_OLDWORLD_MACIO )); +qdev_prop_set_uint64 (DEVICE (macio),"frequency" , tbfreq); - escc =ESCC (object_resolve_path_component (OBJECT (macio),"escc" )); -qdev_prop_set_chr (DEVICE (escc),"chrA" ,serial_hd (0 )); -qdev_prop_set_chr (DEVICE (escc),"chrB" ,serial_hd (1 )); + dev =DEVICE (object_resolve_path_component (macio,"escc" )); +qdev_prop_set_chr (dev,"chrA" ,serial_hd (0 )); +qdev_prop_set_chr (dev,"chrB" ,serial_hd (1 )); -pci_realize_and_unref (macio, pci_bus, &error_fatal); +pci_realize_and_unref (PCI_DEVICE (macio), pci_bus, &error_fatal); - pic_dev =DEVICE (object_resolve_path_component (OBJECT (macio),"pic" )); + pic_dev =DEVICE (object_resolve_path_component (macio,"pic" ));for (i =0 ; i <4 ; i++) {qdev_connect_gpio_out (grackle_dev, i,qdev_get_gpio_in (pic_dev,0x15 + i));
@@ -265,16 +263,14 @@ static void ppc_heathrow_init(MachineState *machine)/* MacIO IDE */ ide_drive_get (hd,ARRAY_SIZE (hd)); - macio_ide =MACIO_IDE (object_resolve_path_component (OBJECT (macio), -"ide[0]" )); + macio_ide =MACIO_IDE (object_resolve_path_component (macio,"ide[0]" ));macio_ide_init_drives (macio_ide, hd); - macio_ide =MACIO_IDE (object_resolve_path_component (OBJECT (macio), -"ide[1]" )); + macio_ide =MACIO_IDE (object_resolve_path_component (macio,"ide[1]" ));macio_ide_init_drives (macio_ide, &hd[MAX_IDE_DEVS ]);/* MacIO CUDA/ADB */ - dev =DEVICE (object_resolve_path_component (OBJECT (macio),"cuda" )); + dev =DEVICE (object_resolve_path_component (macio,"cuda" )); adb_bus =qdev_get_child_bus (dev,"adb.0" ); dev =qdev_new (TYPE_ADB_KEYBOARD );qdev_realize_and_unref (dev, adb_bus, &error_fatal);
Signature · 1 line
2.30.4
PATCH v2 8/13 hw/ppc/mac.h: Move newworld specific parts out from shared header
In reply to BALATON ZoltanMove the parts specific to and only used by mac99 out from the shared mac.h into mac_newworld.c where they better belong.
--- hw/ppc/mac.h | 24 ------------------------ hw/ppc/mac_newworld.c | 19 +++++++++++++++++++ hw/ppc/mac_oldworld.c | 1 + 3 files changed, 20 insertions(+), 24 deletions(-)
hw/ppc/mac.h +0 -24
@@ -26,15 +26,8 @@#ifndef PPC_MAC_H #define PPC_MAC_H -#include "qemu/units.h" #include "exec/memory.h" -#include "hw/boards.h" #include "hw/sysbus.h" -#include "hw/input/adb.h" -#include "hw/misc/mos6522.h" -#include "hw/pci/pci_host.h" -#include "hw/pci-host/uninorth.h" -#include "qom/object.h" #define NVRAM_SIZE 0x2000#define PROM_FILENAME "openbios-ppc"
@@ -65,23 +58,6 @@#define NEWWORLD_EXTING_GPIO1 0x2f#define NEWWORLD_EXTING_GPIO9 0x37 -/* Core99 machine */ -#define TYPE_CORE99_MACHINE MACHINE_TYPE_NAME("mac99") -typedef struct Core99MachineState Core99MachineState ; -DECLARE_INSTANCE_CHECKER (Core99MachineState,CORE99_MACHINE , - TYPE_CORE99_MACHINE) - -#define CORE99_VIA_CONFIG_CUDA 0x0 -#define CORE99_VIA_CONFIG_PMU 0x1 -#define CORE99_VIA_CONFIG_PMU_ADB 0x2 - -struct Core99MachineState { -/*< private >*/ -MachineState parent; - -uint8_t via_config; -}; -/* Grackle PCI */ #define TYPE_GRACKLE_PCI_HOST_BRIDGE "grackle-pcihost"
hw/ppc/mac_newworld.c +19 -0
@@ -48,10 +48,13 @@#include "qemu/osdep.h" #include "qemu/datadir.h" +#include "qemu/units.h" #include "qapi/error.h" #include "hw/ppc/ppc.h" #include "hw/qdev-properties.h" #include "hw/ppc/mac.h" +#include "hw/boards.h" +#include "hw/pci-host/uninorth.h" #include "hw/input/adb.h" #include "hw/ppc/mac_dbdma.h" #include "hw/pci/pci.h"
@@ -83,6 +86,22 @@#define PROM_BASE 0xfff00000#define PROM_SIZE (1 * MiB) +#define TYPE_CORE99_MACHINE MACHINE_TYPE_NAME("mac99") +typedef struct Core99MachineState Core99MachineState ; +DECLARE_INSTANCE_CHECKER (Core99MachineState,CORE99_MACHINE , + TYPE_CORE99_MACHINE) + +#define CORE99_VIA_CONFIG_CUDA 0x0 +#define CORE99_VIA_CONFIG_PMU 0x1 +#define CORE99_VIA_CONFIG_PMU_ADB 0x2 + +struct Core99MachineState { +/*< private >*/ +MachineState parent; + +uint8_t via_config; +}; +static void fw_cfg_boot_set (void *opaque,const char *boot_device,Error **errp) {
hw/ppc/mac_oldworld.c +1 -0
@@ -31,6 +31,7 @@#include "hw/ppc/ppc.h" #include "hw/qdev-properties.h" #include "mac.h" +#include "hw/boards.h" #include "hw/input/adb.h" #include "sysemu/sysemu.h" #include "net/net.h"
Signature · 1 line
2.30.4
PATCH v2 9/13 hw/ppc/mac.h: Move macio specific parts out from shared header
In reply to BALATON ZoltanMove the parts specific to and only used by macio out from the shared mac.h into macio.c where they better belong.
--- hw/misc/macio/macio.c | 5 +++-- hw/ppc/mac.h | 23 ----------------------- include/hw/misc/macio/macio.h | 21 +++++++++++++++++++++ 3 files changed, 24 insertions(+), 25 deletions(-)
hw/misc/macio/macio.c +3 -2
@@ -37,8 +37,9 @@#include "hw/intc/heathrow_pic.h" #include "trace.h" -/* Note: this code is strongly inspirated from the corresponding code -* in PearPC */ +#define ESCC_CLOCK 3686400 + +/* Note: this code is strongly inspired by the corresponding code in PearPC */ /* * The mac-io has two interfaces to the ESCC. One is called "escc-legacy",
hw/ppc/mac.h +0 -23
@@ -35,29 +35,6 @@#define KERNEL_LOAD_ADDR 0x01000000#define KERNEL_GAP 0x00100000 -#define ESCC_CLOCK 3686400 - -/* Old World IRQs */ -#define OLDWORLD_CUDA_IRQ 0x12 -#define OLDWORLD_ESCCB_IRQ 0x10 -#define OLDWORLD_ESCCA_IRQ 0xf -#define OLDWORLD_IDE0_IRQ 0xd -#define OLDWORLD_IDE0_DMA_IRQ 0x2 -#define OLDWORLD_IDE1_IRQ 0xe -#define OLDWORLD_IDE1_DMA_IRQ 0x3 - -/* New World IRQs */ -#define NEWWORLD_CUDA_IRQ 0x19 -#define NEWWORLD_PMU_IRQ 0x19 -#define NEWWORLD_ESCCB_IRQ 0x24 -#define NEWWORLD_ESCCA_IRQ 0x25 -#define NEWWORLD_IDE0_IRQ 0xd -#define NEWWORLD_IDE0_DMA_IRQ 0x2 -#define NEWWORLD_IDE1_IRQ 0xe -#define NEWWORLD_IDE1_DMA_IRQ 0x3 -#define NEWWORLD_EXTING_GPIO1 0x2f -#define NEWWORLD_EXTING_GPIO9 0x37 -/* Grackle PCI */ #define TYPE_GRACKLE_PCI_HOST_BRIDGE "grackle-pcihost"
include/hw/misc/macio/macio.h +21 -0
@@ -38,6 +38,27 @@#include "hw/ppc/openpic.h" #include "qom/object.h" +/* Old World IRQs */ +#define OLDWORLD_CUDA_IRQ 0x12 +#define OLDWORLD_ESCCB_IRQ 0x10 +#define OLDWORLD_ESCCA_IRQ 0xf +#define OLDWORLD_IDE0_IRQ 0xd +#define OLDWORLD_IDE0_DMA_IRQ 0x2 +#define OLDWORLD_IDE1_IRQ 0xe +#define OLDWORLD_IDE1_DMA_IRQ 0x3 + +/* New World IRQs */ +#define NEWWORLD_CUDA_IRQ 0x19 +#define NEWWORLD_PMU_IRQ 0x19 +#define NEWWORLD_ESCCB_IRQ 0x24 +#define NEWWORLD_ESCCA_IRQ 0x25 +#define NEWWORLD_IDE0_IRQ 0xd +#define NEWWORLD_IDE0_DMA_IRQ 0x2 +#define NEWWORLD_IDE1_IRQ 0xe +#define NEWWORLD_IDE1_DMA_IRQ 0x3 +#define NEWWORLD_EXTING_GPIO1 0x2f +#define NEWWORLD_EXTING_GPIO9 0x37 +/* MacIO virtual bus */ #define TYPE_MACIO_BUS "macio-bus"OBJECT_DECLARE_SIMPLE_TYPE (MacIOBusState,MACIO_BUS )
Signature · 1 line
2.30.4
Re: [PATCH v2 09/13] hw/ppc/mac.h: Move macio specific parts out from shared header
Quoted 83 lines · BALATON Zoltan
Move the parts specific to and only used by macio out from the shared
mac.hintomacio.cwhere they better belong.Signed-off-by BALATON Zoltan <[email protected]>Reviewed-by Philippe Mathieu-Daudé <[email protected]>--- hw/misc/macio/macio.c | 5 +++-- hw/ppc/mac.h | 23 ----------------------- include/hw/misc/macio/macio.h | 21 +++++++++++++++++++++ 3 files changed, 24 insertions(+), 25 deletions(-)hw/misc/macio/macio.c +3
-2@@ -37,8 +37,9 @@#include "hw/intc/heathrow_pic.h" #include "trace.h" -/* Note: this code is strongly inspirated from the corresponding code -* in PearPC */ +#define ESCC_CLOCK 3686400 + +/* Note: this code is strongly inspired by the corresponding code in PearPC */ /* * The mac-io has two interfaces to the ESCC. One is called "escc-legacy", hw/ppc/mac.h +0
-23@@ -35,29 +35,6 @@#define KERNEL_LOAD_ADDR 0x01000000#define KERNEL_GAP 0x00100000 -#define ESCC_CLOCK 3686400 - -/* Old World IRQs */ -#define OLDWORLD_CUDA_IRQ 0x12 -#define OLDWORLD_ESCCB_IRQ 0x10 -#define OLDWORLD_ESCCA_IRQ 0xf -#define OLDWORLD_IDE0_IRQ 0xd -#define OLDWORLD_IDE0_DMA_IRQ 0x2 -#define OLDWORLD_IDE1_IRQ 0xe -#define OLDWORLD_IDE1_DMA_IRQ 0x3 - -/* New World IRQs */ -#define NEWWORLD_CUDA_IRQ 0x19 -#define NEWWORLD_PMU_IRQ 0x19 -#define NEWWORLD_ESCCB_IRQ 0x24 -#define NEWWORLD_ESCCA_IRQ 0x25 -#define NEWWORLD_IDE0_IRQ 0xd -#define NEWWORLD_IDE0_DMA_IRQ 0x2 -#define NEWWORLD_IDE1_IRQ 0xe -#define NEWWORLD_IDE1_DMA_IRQ 0x3 -#define NEWWORLD_EXTING_GPIO1 0x2f -#define NEWWORLD_EXTING_GPIO9 0x37 -/* Grackle PCI */ #define TYPE_GRACKLE_PCI_HOST_BRIDGE "grackle-pcihost"include/hw/misc/macio/macio.h +14
-0@@ -38,6 +38,27 @@#include "hw/ppc/openpic.h" #include "qom/object.h" +/* Old World IRQs */ +#define OLDWORLD_CUDA_IRQ 0x12 +#define OLDWORLD_ESCCB_IRQ 0x10 +#define OLDWORLD_ESCCA_IRQ 0xf +#define OLDWORLD_IDE0_IRQ 0xd +#define OLDWORLD_IDE0_DMA_IRQ 0x2 +#define OLDWORLD_IDE1_IRQ 0xe +#define OLDWORLD_IDE1_DMA_IRQ 0x3 + +/* New World IRQs */ +#define NEWWORLD_CUDA_IRQ 0x19 +#define NEWWORLD_PMU_IRQ 0x19 +#define NEWWORLD_ESCCB_IRQ 0x24 +#define NEWWORLD_ESCCA_IRQ 0x25
include/hw/misc/macio/macio.h line 64
Quoted 10 lines
include/hw/misc/macio/macio.h +7
-0+#define NEWWORLD_IDE0_IRQ 0xd +#define NEWWORLD_IDE0_DMA_IRQ 0x2 +#define NEWWORLD_IDE1_IRQ 0xe +#define NEWWORLD_IDE1_DMA_IRQ 0x3 +#define NEWWORLD_EXTING_GPIO1 0x2f +#define NEWWORLD_EXTING_GPIO9 0x37 +/* MacIO virtual bus */ #define TYPE_MACIO_BUS "macio-bus"OBJECT_DECLARE_SIMPLE_TYPE (MacIOBusState,MACIO_BUS )
At some point I'd like to review whether or not this wiring should be done at the board level, however that's orthogonal to this series so:
ATB,
Mark.
PATCH v2 10/13 hw/ppc/mac.h: Move grackle-pcihost declaration out from shared header
In reply to BALATON ZoltanIt is only used by mac_oldworld anyway and it already instantiates a few devices by name so this allows reducing the shared header further.
--- hw/pci-host/grackle.c | 1 + hw/ppc/mac.h | 3 --- hw/ppc/mac_oldworld.c | 2 +- 3 files changed, 2 insertions(+), 4 deletions(-)
hw/pci-host/grackle.c +1 -0
@@ -34,6 +34,7 @@#include "trace.h" #include "qom/object.h" +#define TYPE_GRACKLE_PCI_HOST_BRIDGE "grackle-pcihost" OBJECT_DECLARE_SIMPLE_TYPE(GrackleState, GRACKLE_PCI_HOST_BRIDGE)struct GrackleState {
hw/ppc/mac.h +0 -3
@@ -35,9 +35,6 @@#define KERNEL_LOAD_ADDR 0x01000000#define KERNEL_GAP 0x00100000 -/* Grackle PCI */ -#define TYPE_GRACKLE_PCI_HOST_BRIDGE "grackle-pcihost" -/* Mac NVRAM */ #define TYPE_MACIO_NVRAM "macio-nvram"OBJECT_DECLARE_SIMPLE_TYPE (MacIONVRAMState,MACIO_NVRAM )
hw/ppc/mac_oldworld.c +1 -1
@@ -214,7 +214,7 @@ static void ppc_heathrow_init(MachineState *machine) }/* Grackle PCI host bridge */ - grackle_dev =qdev_new (TYPE_GRACKLE_PCI_HOST_BRIDGE ); + grackle_dev =qdev_new ("grackle-pcihost" );qdev_prop_set_uint32 (grackle_dev,"ofw-addr" ,0x80000000 ); s =SYS_BUS_DEVICE (grackle_dev);sysbus_realize_and_unref (s, &error_fatal);
Signature · 1 line
2.30.4
Re: [PATCH v2 10/13] hw/ppc/mac.h: Move grackle-pcihost declaration out from shared header
Quoted 41 lines · BALATON Zoltan
It is only used by
mac_oldworldanyway and it already instantiates a few devices by name so this allows reducing the shared header further.Signed-off-by BALATON Zoltan <[email protected]>--- hw/pci-host/grackle.c | 1 + hw/ppc/mac.h | 3 --- hw/ppc/mac_oldworld.c | 2 +- 3 files changed, 2 insertions(+), 4 deletions(-)hw/pci-host/grackle.c +1
-0@@ -34,6 +34,7 @@#include "trace.h" #include "qom/object.h" +#define TYPE_GRACKLE_PCI_HOST_BRIDGE "grackle-pcihost" OBJECT_DECLARE_SIMPLE_TYPE(GrackleState, GRACKLE_PCI_HOST_BRIDGE)struct GrackleState {hw/ppc/mac.h +0
-3@@ -35,9 +35,6 @@#define KERNEL_LOAD_ADDR 0x01000000#define KERNEL_GAP 0x00100000 -/* Grackle PCI */ -#define TYPE_GRACKLE_PCI_HOST_BRIDGE "grackle-pcihost" -/* Mac NVRAM */ #define TYPE_MACIO_NVRAM "macio-nvram"OBJECT_DECLARE_SIMPLE_TYPE (MacIONVRAMState,MACIO_NVRAM )hw/ppc/mac_oldworld.c +0
-0
hw/ppc/mac_oldworld.c static void ppc_heathrow_init(MachineState *machine) · line 220
Quoted 8 lines
hw/ppc/mac_oldworld.c +1
-1@@ -214,7 +214,7 @@ static void ppc_heathrow_init(MachineState *machine) }/* Grackle PCI host bridge */ - grackle_dev =qdev_new (TYPE_GRACKLE_PCI_HOST_BRIDGE ); + grackle_dev =qdev_new ("grackle-pcihost" );qdev_prop_set_uint32 (grackle_dev,"ofw-addr" ,0x80000000 ); s =SYS_BUS_DEVICE (grackle_dev);sysbus_realize_and_unref (s, &error_fatal);
Why did you include this patch again in v2 when I nacked it in v1?
ATB,
Mark.
Re: [PATCH v2 10/13] hw/ppc/mac.h: Move grackle-pcihost declaration out from shared header
Quoted 41 lines · Mark Cave-Ayland
Quoted 39 lines · BALATON Zoltan
It is only used by
mac_oldworldanyway and it already instantiates a few devices by name so this allows reducing the shared header further.Signed-off-by BALATON Zoltan <[email protected]>--- hw/pci-host/grackle.c | 1 + hw/ppc/mac.h | 3 --- hw/ppc/mac_oldworld.c | 2 +- 3 files changed, 2 insertions(+), 4 deletions(-)hw/pci-host/grackle.c +0
-0@@ -34,6 +34,7 @@#include "trace.h" #include "qom/object.h" +#define TYPE_GRACKLE_PCI_HOST_BRIDGE "grackle-pcihost" OBJECT_DECLARE_SIMPLE_TYPE(GrackleState, GRACKLE_PCI_HOST_BRIDGE)struct GrackleState {hw/ppc/mac.h +0
-2@@ -35,9 +35,6 @@#define KERNEL_LOAD_ADDR 0x01000000#define KERNEL_GAP 0x00100000 -/* Grackle PCI */ -#define TYPE_GRACKLE_PCI_HOST_BRIDGE "grackle-pcihost" -/* Mac NVRAM */ #define TYPE_MACIO_NVRAM "macio-nvram"OBJECT_DECLARE_SIMPLE_TYPE (MacIONVRAMState,MACIO_NVRAM )hw/ppc/mac_oldworld.c +0
-0@@ -214,7 +214,7 @@ static void ppc_heathrow_init(MachineState *machine) }
Quoted 8 lines
hw/ppc/mac_oldworld.c static void ppc_heathrow_init(MachineState *machine) · line 220
Quoted 6 lines
hw/ppc/mac_oldworld.c +1
-1/* Grackle PCI host bridge */ - grackle_dev =qdev_new (TYPE_GRACKLE_PCI_HOST_BRIDGE ); + grackle_dev =qdev_new ("grackle-pcihost" );qdev_prop_set_uint32 (grackle_dev,"ofw-addr" ,0x80000000 ); s =SYS_BUS_DEVICE (grackle_dev);sysbus_realize_and_unref (s, &error_fatal);Why did you include this patch again in v2 when I nacked it in v1?
You did not nack it just said you'd prefer a header instead. As a reviwer you express your opinion not an absolute decision that can't be discussed. I've replied to that but could not drop this patch as it's needed for later patches to get mac.h cleaned so until we agree on something this has left unchanged. I'm not a fan of one line headers and splitting up files into separate directories that is harder to work with and also think reorganising grackle is a separate clean up out of scope for this series but OK, I'll move the TYPE define in a new header in the next version. I'll wait for your reply on sysbus_mmio_map before sending a new version.
Regards,
BALATON Zoltan
Re: [PATCH v2 10/13] hw/ppc/mac.h: Move grackle-pcihost declaration out from shared header
Quoted 51 lines · BALATON Zoltan
Quoted 41 lines · Mark Cave-Ayland
Quoted 39 lines · BALATON Zoltan
It is only used by
mac_oldworldanyway and it already instantiates a few devices by name so this allows reducing the shared header further.Signed-off-by BALATON Zoltan <[email protected]>---
hw/pci-host/grackle.c| 1 +
hw/ppc/mac.h | 3 ---
hw/ppc/mac_oldworld.c| 2 +-3 files changed, 2 insertions(+), 4 deletions(-)hw/pci-host/grackle.c +0
-0@@ -34,6 +34,7 @@ #include "trace.h" #include "qom/object.h"+#define
TYPE_GRACKLE_PCI_HOST_BRIDGE"grackle-pcihost"OBJECT_DECLARE_SIMPLE_TYPE(GrackleState, GRACKLE_PCI_HOST_BRIDGE)struct GrackleState {hw/ppc/mac.h +0
-0@@ -35,9 +35,6 @@ #define KERNEL_LOAD_ADDR 0x01000000 #define KERNEL_GAP 0x00100000-/* Grackle PCI */
hw/ppc/mac.h +0
-2-#define TYPE_GRACKLE_PCI_HOST_BRIDGE "grackle-pcihost" -/* Mac NVRAM */
#defineTYPE_MACIO_NVRAM"macio-nvram"OBJECT_DECLARE_SIMPLE_TYPE(MacIONVRAMState, MACIO_NVRAM)hw/ppc/mac_oldworld.c +0
-0@@ -214,7 +214,7 @@ static void ppc_heathrow_init(MachineState *machine) }Quoted 8 lines
hw/ppc/mac_oldworld.c static void ppc_heathrow_init(MachineState *machine) · line 220
Quoted 6 lines
hw/ppc/mac_oldworld.c +1
-1/* Grackle PCI host bridge */ - grackle_dev = qdev_new(TYPE_GRACKLE_PCI_HOST_BRIDGE); + grackle_dev = qdev_new("grackle-pcihost"); qdev_prop_set_uint32(grackle_dev, "ofw-addr", 0x80000000); s = SYS_BUS_DEVICE(grackle_dev); sysbus_realize_and_unref(s, &error_fatal);Why did you include this patch again in v2 when I nacked it in v1?
Quoted 1 line
You did not nack it just said you'd prefer a header instead. As a reviwer you express your opinion not an absolute decision that can't be discussed. I've replied to that but could not drop this patch as it's needed for later patches to get
mac.hcleaned so until we agree on something this has left unchanged. I'm not a fan of one line headers and splitting up files into separate directories that is harder to work with and also think reorganising grackle is a separate clean up out of scope for this series but OK, I'll move the TYPE define in a new header in the next version. I'll wait for your reply onsysbus_mmio_mapbefore sending a new version.
I should add this obviously also includes moving the GrackleState struct to the new header file at the same time, as per typical QOM practice.
ATB,
Mark.
PATCH v2 11/13 hw/ppc/mac.h: Move PROM and KERNEL defines to board code
In reply to BALATON ZoltanThe PROM_FILENAME and KERNEL_* defines are used by mac_oldworld and mac_newworld but they don't have to be identical so these could be moved to the individual boards.
--- hw/ppc/mac.h | 4 ---- hw/ppc/mac_newworld.c | 4 ++++ hw/ppc/mac_oldworld.c | 7 ++++++- 3 files changed, 10 insertions(+), 5 deletions(-)
hw/ppc/mac.h +0 -4
@@ -30,10 +30,6 @@#include "hw/sysbus.h" #define NVRAM_SIZE 0x2000 -#define PROM_FILENAME "openbios-ppc" - -#define KERNEL_LOAD_ADDR 0x01000000 -#define KERNEL_GAP 0x00100000/* Mac NVRAM */ #define TYPE_MACIO_NVRAM "macio-nvram"
hw/ppc/mac_newworld.c +4 -0
@@ -83,9 +83,13 @@#define NDRV_VGA_FILENAME "qemu_vga.ndrv" +#define PROM_FILENAME "openbios-ppc"#define PROM_BASE 0xfff00000#define PROM_SIZE (1 * MiB) +#define KERNEL_LOAD_ADDR 0x01000000 +#define KERNEL_GAP 0x00100000 +#define TYPE_CORE99_MACHINE MACHINE_TYPE_NAME("mac99")typedef struct Core99MachineState Core99MachineState ; DECLARE_INSTANCE_CHECKER(Core99MachineState, CORE99_MACHINE,
hw/ppc/mac_oldworld.c +6 -1
@@ -57,10 +57,15 @@#define NDRV_VGA_FILENAME "qemu_vga.ndrv" -#define GRACKLE_BASE 0xfec00000 +#define PROM_FILENAME "openbios-ppc"#define PROM_BASE 0xffc00000#define PROM_SIZE (4 * MiB) +#define KERNEL_LOAD_ADDR 0x01000000 +#define KERNEL_GAP 0x00100000 + +#define GRACKLE_BASE 0xfec00000 +static void fw_cfg_boot_set (void *opaque,const char *boot_device,Error **errp) {
Signature · 1 line
2.30.4
PATCH v2 12/13 hw/ppc/mac.h: Rename to include/hw/nvram/mac_nvram.h
In reply to BALATON ZoltanAll that is left in mac.h now belongs to the nvram emulation so rename it accordingly and only include it where it is really used.
--- MAINTAINERS | 1 + hw/ide/macio.c | 1 - hw/intc/heathrow_pic.c | 1 - hw/intc/openpic.c | 1 - hw/misc/macio/cuda.c | 1 - hw/misc/macio/gpio.c | 1 - hw/misc/macio/macio.c | 1 - hw/misc/macio/pmu.c | 1 - hw/nvram/mac_nvram.c | 2 +- hw/pci-host/grackle.c | 1 - hw/pci-host/uninorth.c | 1 - hw/ppc/mac_newworld.c | 2 +- hw/ppc/mac_oldworld.c | 1 - include/hw/misc/macio/macio.h | 2 +- hw/ppc/mac.h => include/hw/nvram/mac_nvram.h | 11 ++++++----- 15 files changed, 10 insertions(+), 18 deletions(-) rename hw/ppc/mac.h => include/hw/nvram/mac_nvram.h (89%)
MAINTAINERS +1 -0
@@ -1328,6 +1328,7 @@ F: hw/nvram/mac_nvram.c F: hw/input/adb* F: include/hw/misc/macio/ F: include/hw/misc/mos6522.h +F: include/hw/nvram/mac_nvram.h F: include/hw/ppc/mac_dbdma.h F: include/hw/pci-host/uninorth.h F: include/hw/input/adb*
hw/ide/macio.c +0 -1
@@ -24,7 +24,6 @@*/ #include "qemu/osdep.h" -#include "hw/ppc/mac.h" #include "hw/ppc/mac_dbdma.h" #include "hw/qdev-properties.h" #include "migration/vmstate.h"
hw/intc/heathrow_pic.c +0 -1
@@ -24,7 +24,6 @@*/ #include "qemu/osdep.h" -#include "hw/ppc/mac.h" #include "migration/vmstate.h" #include "qemu/module.h" #include "hw/intc/heathrow_pic.h"
hw/intc/openpic.c +0 -1
@@ -32,7 +32,6 @@#include "qemu/osdep.h" #include "hw/irq.h" -#include "hw/ppc/mac.h" #include "hw/pci/pci.h" #include "hw/ppc/openpic.h" #include "hw/ppc/ppc_e500.h"
hw/misc/macio/cuda.c +0 -1
@@ -25,7 +25,6 @@#include "qemu/osdep.h" #include "hw/irq.h" -#include "hw/ppc/mac.h" #include "hw/qdev-properties.h" #include "migration/vmstate.h" #include "hw/input/adb.h"
hw/misc/macio/gpio.c +0 -1
@@ -24,7 +24,6 @@*/ #include "qemu/osdep.h" -#include "hw/ppc/mac.h" #include "hw/qdev-properties.h" #include "migration/vmstate.h" #include "hw/misc/macio/macio.h"
hw/misc/macio/macio.c +0 -1
@@ -26,7 +26,6 @@#include "qemu/osdep.h" #include "qapi/error.h" #include "qemu/module.h" -#include "hw/ppc/mac.h" #include "hw/misc/macio/cuda.h" #include "hw/pci/pci.h" #include "hw/ppc/mac_dbdma.h"
hw/misc/macio/pmu.c +0 -1
@@ -29,7 +29,6 @@*/ #include "qemu/osdep.h" -#include "hw/ppc/mac.h" #include "hw/qdev-properties.h" #include "migration/vmstate.h" #include "hw/input/adb.h"
hw/nvram/mac_nvram.c +1 -1
@@ -25,7 +25,7 @@#include "qemu/osdep.h" #include "hw/nvram/chrp_nvram.h" -#include "hw/ppc/mac.h" +#include "hw/nvram/mac_nvram.h" #include "hw/qdev-properties.h" #include "migration/vmstate.h" #include "qemu/cutils.h"
hw/pci-host/grackle.c +0 -1
@@ -25,7 +25,6 @@#include "qemu/osdep.h" #include "hw/pci/pci_host.h" -#include "hw/ppc/mac.h" #include "hw/qdev-properties.h" #include "hw/pci/pci.h" #include "hw/irq.h"
hw/pci-host/uninorth.c +0 -1
@@ -24,7 +24,6 @@#include "qemu/osdep.h" #include "hw/irq.h" -#include "hw/ppc/mac.h" #include "hw/qdev-properties.h" #include "qemu/module.h" #include "hw/pci/pci.h"
hw/ppc/mac_newworld.c +1 -1
@@ -52,7 +52,7 @@#include "qapi/error.h" #include "hw/ppc/ppc.h" #include "hw/qdev-properties.h" -#include "hw/ppc/mac.h" +#include "hw/nvram/mac_nvram.h" #include "hw/boards.h" #include "hw/pci-host/uninorth.h" #include "hw/input/adb.h"
hw/ppc/mac_oldworld.c +0 -1
@@ -30,7 +30,6 @@#include "qapi/error.h" #include "hw/ppc/ppc.h" #include "hw/qdev-properties.h" -#include "mac.h" #include "hw/boards.h" #include "hw/input/adb.h" #include "sysemu/sysemu.h"
include/hw/misc/macio/macio.h +1 -1
@@ -33,7 +33,7 @@#include "hw/misc/macio/cuda.h" #include "hw/misc/macio/gpio.h" #include "hw/misc/macio/pmu.h" -#include "hw/ppc/mac.h" +#include "hw/nvram/mac_nvram.h" #include "hw/ppc/mac_dbdma.h" #include "hw/ppc/openpic.h" #include "qom/object.h"
include/hw/nvram/mac_nvram.h renamed from hw/ppc/mac.h +6 -5
@@ -1,5 +1,5 @@/* -* QEMU PowerMac emulation shared definitions and prototypes +* PowerMac NVRAM emulation * * Copyright (c) 2004-2007 Fabrice Bellard * Copyright (c) 2007 Jocelyn Mayer
@@ -23,8 +23,8 @@* THE SOFTWARE. */ -#ifndef PPC_MAC_H -#define PPC_MAC_H +#ifndef MAC_NVRAM_H +#define MAC_NVRAM_H #include "exec/memory.h" #include "hw/sysbus.h"
@@ -47,5 +47,6 @@ struct MacIONVRAMState { uint8_t *data; }; -void pmac_format_nvram_partition (MacIONVRAMState *nvr,int len); -#endif /* PPC_MAC_H */ +void pmac_format_nvram_partition (MacIONVRAMState *nvr,int len); + +#endif /* MAC_NVRAM_H */
Signature · 1 line
2.30.4
PATCH v2 13/13 mac_nvram: Use NVRAM_SIZE constant
In reply to BALATON ZoltanThe NVRAM_SIZE constant was defined but not used. Rename it to MACIO_NVRAM_SIZE to match the device model and use it where appropriate.
--- hw/misc/macio/macio.c | 2 +- hw/ppc/mac_newworld.c | 4 ++-- include/hw/nvram/mac_nvram.h | 3 +-- 3 files changed, 4 insertions(+), 5 deletions(-)
hw/misc/macio/macio.c +1 -1
@@ -226,7 +226,7 @@ static void macio_oldworld_init(Object *obj)object_initialize_child (OBJECT (s),"nvram" , &os->nvram,TYPE_MACIO_NVRAM ); dev =DEVICE (&os->nvram); -qdev_prop_set_uint32 (dev,"size" ,0x2000 ); +qdev_prop_set_uint32 (dev,"size" ,MACIO_NVRAM_SIZE );qdev_prop_set_uint32 (dev,"it_shift" ,4 );for (i =0 ; i <2 ; i++) {
hw/ppc/mac_newworld.c +2 -2
@@ -445,12 +445,12 @@ static void ppc_core99_init(MachineState *machine) nvram_addr =0xFFE00000 ; } dev =qdev_new (TYPE_MACIO_NVRAM ); -qdev_prop_set_uint32 (dev,"size" ,0x2000 ); +qdev_prop_set_uint32 (dev,"size" ,MACIO_NVRAM_SIZE );qdev_prop_set_uint32 (dev,"it_shift" ,1 );sysbus_realize_and_unref (SYS_BUS_DEVICE (dev), &error_fatal);sysbus_mmio_map (SYS_BUS_DEVICE (dev),0 , nvram_addr); nvr =MACIO_NVRAM (dev); -pmac_format_nvram_partition (nvr,0x2000 ); +pmac_format_nvram_partition (nvr,MACIO_NVRAM_SIZE );/* No PCI init: the BIOS will do it */ dev =qdev_new (TYPE_FW_CFG_MEM );
include/hw/nvram/mac_nvram.h +1 -2
@@ -29,9 +29,8 @@#include "exec/memory.h" #include "hw/sysbus.h" -#define NVRAM_SIZE 0x2000 +#define MACIO_NVRAM_SIZE 0x2000 -/* Mac NVRAM */ #define TYPE_MACIO_NVRAM "macio-nvram"OBJECT_DECLARE_SIMPLE_TYPE (MacIONVRAMState,MACIO_NVRAM )
Signature · 1 line
2.30.4
Re: [PATCH v2 13/13] mac_nvram: Use NVRAM_SIZE constant
Quoted 47 lines · BALATON Zoltan
The
NVRAM_SIZEconstant was defined but not used. Rename it toMACIO_NVRAM_SIZEto match the device model and use it where appropriate.Signed-off-by BALATON Zoltan <[email protected]>--- hw/misc/macio/macio.c | 2 +- hw/ppc/mac_newworld.c | 4 ++-- include/hw/nvram/mac_nvram.h | 3 +-- 3 files changed, 4 insertions(+), 5 deletions(-)hw/misc/macio/macio.c +1
-1@@ -226,7 +226,7 @@ static void macio_oldworld_init(Object *obj)object_initialize_child (OBJECT (s),"nvram" , &os->nvram,TYPE_MACIO_NVRAM ); dev =DEVICE (&os->nvram); -qdev_prop_set_uint32 (dev,"size" ,0x2000 ); +qdev_prop_set_uint32 (dev,"size" ,MACIO_NVRAM_SIZE );qdev_prop_set_uint32 (dev,"it_shift" ,4 );for (i =0 ; i <2 ; i++) {hw/ppc/mac_newworld.c +2
-2@@ -445,12 +445,12 @@ static void ppc_core99_init(MachineState *machine) nvram_addr =0xFFE00000 ; } dev =qdev_new (TYPE_MACIO_NVRAM ); -qdev_prop_set_uint32 (dev,"size" ,0x2000 ); +qdev_prop_set_uint32 (dev,"size" ,MACIO_NVRAM_SIZE );qdev_prop_set_uint32 (dev,"it_shift" ,1 );sysbus_realize_and_unref (SYS_BUS_DEVICE (dev), &error_fatal);sysbus_mmio_map (SYS_BUS_DEVICE (dev),0 , nvram_addr); nvr =MACIO_NVRAM (dev); -pmac_format_nvram_partition (nvr,0x2000 ); +pmac_format_nvram_partition (nvr,MACIO_NVRAM_SIZE );/* No PCI init: the BIOS will do it */ dev =qdev_new (TYPE_FW_CFG_MEM );include/hw/nvram/mac_nvram.h +0
-0
include/hw/nvram/mac_nvram.h line 35
Quoted 9 lines
include/hw/nvram/mac_nvram.h +1
-2@@ -29,9 +29,8 @@#include "exec/memory.h" #include "hw/sysbus.h" -#define NVRAM_SIZE 0x2000 +#define MACIO_NVRAM_SIZE 0x2000 -/* Mac NVRAM */ #define TYPE_MACIO_NVRAM "macio-nvram"OBJECT_DECLARE_SIMPLE_TYPE (MacIONVRAMState,MACIO_NVRAM )
ATB,
Mark.
Mark,
It seems that you're usually push mac changes via a qemu-macppc PR (git log says that the last one was Jan 2021), so feel free to keep doing so.
If it's convenient for you I can pick them via ppc-next as well. Just let me know.
Thanks,
Daniel
Quoted 44 lines · BALATON Zoltan
This series includes some clean ups to
mac_newworldandmac_oldworldto make them a bit simpler and more readable, It also removes the sharedmac.hfile that turns out was more of a random collection of unrelated things. Getting rid of thismac.himproves the locality of device models and reduces unnecessary interdependency.v2: Split some patches and add a few more I've noticed now and address review comments
BALATON Zoltan (13):
mac_newworld: Drop some variables
mac_oldworld: Drop some more variables mac_{old|new}world: Set tbfreq at declaration mac_{old|new}world: Avoid else branch by setting default value
mac_oldworld: Do not open codesysbus_mmio_map()
mac_newworld: Simplify creation of Uninorth devices mac_{old|new}world: Reduce number of QOM castshw/ppc/mac.h: Move newworld specific parts out from shared headerhw/ppc/mac.h: Move macio specific parts out from shared headerhw/ppc/mac.h: Move grackle-pcihost declaration out from shared headerhw/ppc/mac.h: Move PROM and KERNEL defines to board codehw/ppc/mac.h: Rename toinclude/hw/nvram/mac_nvram.h
mac_nvram: UseNVRAM_SIZEconstantMAINTAINERS | 1 + hw/ide/macio.c | 1 - hw/intc/heathrow_pic.c | 1 - hw/intc/openpic.c | 1 - hw/misc/macio/cuda.c | 1 - hw/misc/macio/gpio.c | 1 - hw/misc/macio/macio.c | 8 +- hw/misc/macio/pmu.c | 1 - hw/nvram/mac_nvram.c | 2 +- hw/pci-host/grackle.c | 2 +- hw/pci-host/uninorth.c | 1 - hw/ppc/mac.h | 105 ---------------- hw/ppc/mac_newworld.c | 223 ++++++++++++++++------------------ hw/ppc/mac_oldworld.c | 113 +++++++---------- include/hw/misc/macio/macio.h | 23 +++- include/hw/nvram/mac_nvram.h | 51 ++++++++ 16 files changed, 230 insertions(+), 305 deletions(-)delete mode 100644
hw/ppc/mac.h
create mode 100644include/hw/nvram/mac_nvram.h
Quoted 11 lines · Daniel Henrique Barboza
Mark,
It seems that you're usually push mac changes via a qemu-macppc PR (git log says that the last one was Jan 2021), so feel free to keep doing so.
If it's convenient for you I can pick them via ppc-next as well. Just let me know.
Thanks,
Daniel
Thanks Daniel, I really appreciate the offer of help - I'll let you know if I need to take you up on it :)
ATB,
Mark.