Skip to contentSkip to conversation

Add support for gb200-bmc machine

PATCH Applied Ed Tanous 3 participants 14 messages Jul 3, 2025

Subsystems (2)
lore
Share & tools
lore

Ed Tanous

author
#0 lore raw

v2 cover Add support for gb200-bmc machine

This patch series adds support for gb200-bmc, a baseboard management controller module based on an Aspeed 2600 SOC.

v2:
- Rebase on master
- Drop duplicated patch for enabling PCA954X
- Updated commit message with source information
- Added functional tests and example openbmc image

Ed Tanous (4):
hw/arm/aspeed: Add second SPI chip to Aspeed model
docs: add support for gb200-bmc hw/arm/aspeed: Add GB200 BMC target tests/functional: Add gb200 tests

 docs/system/arm/aspeed.rst                    |  4 +-
 hw/arm/aspeed.c                               | 81 +++++++++++++++++++
 hw/arm/aspeed_eeprom.c                        | 21 +++++
 hw/arm/aspeed_eeprom.h                        |  3 +
 include/hw/arm/aspeed.h                       |  2 +
 tests/functional/aspeed.py                    |  9 ++-
 tests/functional/meson.build                  |  2 +
 .../test_arm_aspeed_gb200nvl_bmc.py           | 26 ++++++
 8 files changed, 144 insertions(+), 4 deletions(-)
 create mode 100755 tests/functional/test_arm_aspeed_gb200nvl_bmc.py
Signature · 1 line
2.43.0
author
#1 lore raw

PATCH v2 1/4 hw/arm/aspeed: Add second SPI chip to Aspeed model

Aspeed2600 has two spi lanes; Add a new struct that can mount the second SPI.

---
 hw/arm/aspeed.c         | 2 ++
 include/hw/arm/aspeed.h | 2 ++
 2 files changed, 4 insertions(+)
hw/arm/aspeed.c +2 -0
index d0b333646e..3ef7f6c5b2 100644
@@ -465,6 +465,8 @@ static void aspeed_machine_init(MachineState *machine)
         aspeed_board_init_flashes(&bmc->soc->spi[0],
                               bmc->spi_model ? bmc->spi_model : amc->spi_model,
                               1, amc->num_cs);
+        aspeed_board_init_flashes(&bmc->soc->spi[1],
+                                  amc->spi2_model, 1, amc->num_cs2);
     }
 
     if (machine->kernel_filename && sc->num_cpus > 1) {
include/hw/arm/aspeed.h +2 -0
index 973277bea6..6c36455656 100644
@@ -35,7 +35,9 @@ struct AspeedMachineClass {
     uint32_t hw_strap2;
     const char *fmc_model;
     const char *spi_model;
+    const char *spi2_model;
     uint32_t num_cs;
+    uint32_t num_cs2;
     uint32_t macs_mask;
     void (*i2c_init)(AspeedMachineState *bmc);
     uint32_t uart_default;
Signature · 1 line
2.43.0
Reviewed-by on v2 1/4
#2 lore raw

Re: [PATCH v2 1/4] hw/arm/aspeed: Add second SPI chip to Aspeed model

Quoted 4 lines · Ed Tanous

Aspeed2600 has two spi lanes; Add a new struct that can mount the second SPI.

Thanks,

C.

Quoted 32 lines
---
  hw/arm/aspeed.c         | 2 ++
  include/hw/arm/aspeed.h | 2 ++
  2 files changed, 4 insertions(+)
hw/arm/aspeed.c +2 -0
index d0b333646e..3ef7f6c5b2 100644
@@ -465,6 +465,8 @@ static void aspeed_machine_init(MachineState *machine)
          aspeed_board_init_flashes(&bmc->soc->spi[0],
                                bmc->spi_model ? bmc->spi_model : amc->spi_model,
                                1, amc->num_cs);
+        aspeed_board_init_flashes(&bmc->soc->spi[1],
+                                  amc->spi2_model, 1, amc->num_cs2);
      }
 
      if (machine->kernel_filename && sc->num_cpus > 1) {
include/hw/arm/aspeed.h +2 -0
index 973277bea6..6c36455656 100644
@@ -35,7 +35,9 @@ struct AspeedMachineClass {
      uint32_t hw_strap2;
      const char *fmc_model;
      const char *spi_model;
+    const char *spi2_model;
      uint32_t num_cs;
+    uint32_t num_cs2;
      uint32_t macs_mask;
      void (*i2c_init)(AspeedMachineState *bmc);
      uint32_t uart_default;
author
#3 lore raw

PATCH v2 2/4 docs: add support for gb200-bmc

In reply to Ed Tanous

This patch updates the docs for support of gb200-bmc.

---
 docs/system/arm/aspeed.rst | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
docs/system/arm/aspeed.rst +2 -2
index 43d27d83cb..bec0a1dfa8 100644
@@ -1,5 +1,4 @@
-Aspeed family boards (``ast2500-evb``, ``ast2600-evb``, ``ast2700-evb``, ``bletchley-bmc``, ``fuji-bmc``, ``fby35-bmc``, ``fp5280g2-bmc``, ``g220a-bmc``, ``palmetto-bmc``, ``qcom-dc-scm-v1-bmc``, ``qcom-firework-bmc``, ``quanta-q71l-bmc``, ``rainier-bmc``, ``romulus-bmc``, ``sonorapass-bmc``, ``supermicrox11-bmc``, ``supermicrox11spi-bmc``, ``tiogapass-bmc``, ``witherspoon-bmc``, ``yosemitev2-bmc``)
-=================================================================================================================================================================================================================================================================================================================================================================================================================================
+Aspeed family boards (``ast2500-evb``, ``ast2600-evb``, ``ast2700-evb``, ``bletchley-bmc``, ``fuji-bmc``, ``gb200nvl-bmc``, ``fby35-bmc``, ``fp5280g2-bmc``, ``g220a-bmc``, ``palmetto-bmc``, ``qcom-dc-scm-v1-bmc``, ``qcom-firework-bmc``, ``quanta-q71l-bmc``, ``rainier-bmc``, ``romulus-bmc``, ``sonorapass-bmc``, ``supermicrox11-bmc``, ``supermicrox11spi-bmc``, ``tiogapass-bmc``, ``witherspoon-bmc``, ``yosemitev2-bmc``)
 
 The QEMU Aspeed machines model BMCs of various OpenPOWER systems and
 Aspeed evaluation boards. They are based on different releases of the
@@ -35,6 +34,7 @@ AST2600 SoC based machines :
 - ``fuji-bmc``             Facebook Fuji BMC
 - ``bletchley-bmc``        Facebook Bletchley BMC
 - ``fby35-bmc``            Facebook fby35 BMC
+- ``gb200nvl-bmc``         Nvidia GB200nvl BMC
 - ``qcom-dc-scm-v1-bmc``   Qualcomm DC-SCM V1 BMC
 - ``qcom-firework-bmc``    Qualcomm Firework BMC
 
Signature · 1 line
2.43.0
Reviewed-by on v2 2/4
#4 lore raw

Re: [PATCH v2 2/4] docs: add support for gb200-bmc

Quoted 3 lines · Ed Tanous

This patch updates the docs for support of gb200-bmc.

Thanks,

C.

Quoted 23 lines
---
  docs/system/arm/aspeed.rst | 4 ++--
  1 file changed, 2 insertions(+), 2 deletions(-)
docs/system/arm/aspeed.rst +2 -2
index 43d27d83cb..bec0a1dfa8 100644
@@ -1,5 +1,4 @@
-Aspeed family boards (``ast2500-evb``, ``ast2600-evb``, ``ast2700-evb``, ``bletchley-bmc``, ``fuji-bmc``, ``fby35-bmc``, ``fp5280g2-bmc``, ``g220a-bmc``, ``palmetto-bmc``, ``qcom-dc-scm-v1-bmc``, ``qcom-firework-bmc``, ``quanta-q71l-bmc``, ``rainier-bmc``, ``romulus-bmc``, ``sonorapass-bmc``, ``supermicrox11-bmc``, ``supermicrox11spi-bmc``, ``tiogapass-bmc``, ``witherspoon-bmc``, ``yosemitev2-bmc``)
-=================================================================================================================================================================================================================================================================================================================================================================================================================================
+Aspeed family boards (``ast2500-evb``, ``ast2600-evb``, ``ast2700-evb``, ``bletchley-bmc``, ``fuji-bmc``, ``gb200nvl-bmc``, ``fby35-bmc``, ``fp5280g2-bmc``, ``g220a-bmc``, ``palmetto-bmc``, ``qcom-dc-scm-v1-bmc``, ``qcom-firework-bmc``, ``quanta-q71l-bmc``, ``rainier-bmc``, ``romulus-bmc``, ``sonorapass-bmc``, ``supermicrox11-bmc``, ``supermicrox11spi-bmc``, ``tiogapass-bmc``, ``witherspoon-bmc``, ``yosemitev2-bmc``)
 
  The QEMU Aspeed machines model BMCs of various OpenPOWER systems and
  Aspeed evaluation boards. They are based on different releases of the
@@ -35,6 +34,7 @@ AST2600 SoC based machines :
  - ``fuji-bmc``             Facebook Fuji BMC
  - ``bletchley-bmc``        Facebook Bletchley BMC
  - ``fby35-bmc``            Facebook fby35 BMC
+- ``gb200nvl-bmc``         Nvidia GB200nvl BMC
  - ``qcom-dc-scm-v1-bmc``   Qualcomm DC-SCM V1 BMC
  - ``qcom-firework-bmc``    Qualcomm Firework BMC
 
author
#5 lore raw

PATCH v2 3/4 hw/arm/aspeed: Add GB200 BMC target

In reply to Ed Tanous

GB200nvl72 is a system for for accelerated compute. This is a model for the BMC target within the system.

This is based on the device tree aspeed-bmc-nvidia-gb200nvl-bmc.dts from:

[1] https://github.com/openbmc/linux/blob/dev-6.6/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts

---
 hw/arm/aspeed.c        | 79 ++++++++++++++++++++++++++++++++++++++++++
 hw/arm/aspeed_eeprom.c | 21 +++++++++++
 hw/arm/aspeed_eeprom.h |  3 ++
 3 files changed, 103 insertions(+)
hw/arm/aspeed.c +79 -0
index 3ef7f6c5b2..98144ced86 100644
@@ -19,6 +19,7 @@
 #include "hw/i2c/i2c_mux_pca954x.h"
 #include "hw/i2c/smbus_eeprom.h"
 #include "hw/gpio/pca9552.h"
+#include "hw/gpio/pca9554.h"
 #include "hw/nvram/eeprom_at24c.h"
 #include "hw/sensor/tmp105.h"
 #include "hw/misc/led.h"
@@ -201,6 +202,10 @@ struct AspeedMachineState {
 #define BLETCHLEY_BMC_HW_STRAP1 AST2600_EVB_HW_STRAP1
 #define BLETCHLEY_BMC_HW_STRAP2 AST2600_EVB_HW_STRAP2
 
+/* GB200NVL hardware value */
+#define GB200NVL_BMC_HW_STRAP1 AST2600_EVB_HW_STRAP1
+#define GB200NVL_BMC_HW_STRAP2 AST2600_EVB_HW_STRAP2
+
 /* Qualcomm DC-SCM hardware value */
 #define QCOM_DC_SCM_V1_BMC_HW_STRAP1  0x00000000
 #define QCOM_DC_SCM_V1_BMC_HW_STRAP2  0x00000041
@@ -647,6 +652,12 @@ static void create_pca9552(AspeedSoCState *soc, int bus_id, int addr)
                             TYPE_PCA9552, addr);
 }
 
+static I2CSlave *create_pca9554(AspeedSoCState *soc, int bus_id, int addr)
+{
+    return i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, bus_id),
+                            TYPE_PCA9554, addr);
+}
+
 static void sonorapass_bmc_i2c_init(AspeedMachineState *bmc)
 {
     AspeedSoCState *soc = bmc->soc;
@@ -1052,6 +1063,45 @@ static void bletchley_bmc_i2c_init(AspeedMachineState *bmc)
     i2c_slave_create_simple(i2c[12], TYPE_PCA9552, 0x67);
 }
 
+
+static void gb200nvl_bmc_i2c_init(AspeedMachineState *bmc)
+{
+    AspeedSoCState *soc = bmc->soc;
+    I2CBus *i2c[15] = {};
+    DeviceState *dev;
+    for (int i = 0; i < sizeof(i2c) / sizeof(i2c[0]); i++) {
+        if ((i == 11) || (i == 12) || (i == 13)) {
+            continue;
+        }
+        i2c[i] = aspeed_i2c_get_bus(&soc->i2c, i);
+    }
+
+    /* Bus 5 Expander */
+    create_pca9554(soc, 4, 0x21);
+
+    /* Mux I2c Expanders */
+    i2c_slave_create_simple(i2c[5], "pca9546", 0x71);
+    i2c_slave_create_simple(i2c[5], "pca9546", 0x72);
+    i2c_slave_create_simple(i2c[5], "pca9546", 0x73);
+    i2c_slave_create_simple(i2c[5], "pca9546", 0x75);
+    i2c_slave_create_simple(i2c[5], "pca9546", 0x76);
+    i2c_slave_create_simple(i2c[5], "pca9546", 0x77);
+
+    /* Bus 10 */
+    dev = DEVICE(create_pca9554(soc, 9, 0x20));
+
+    /* Set FPGA_READY */
+    object_property_set_str(OBJECT(dev), "pin1", "high", &error_fatal);
+
+    create_pca9554(soc, 9, 0x21);
+    at24c_eeprom_init(i2c[9], 0x50, 64 * KiB);
+    at24c_eeprom_init(i2c[9], 0x51, 64 * KiB);
+
+    /* Bus 11 */
+    at24c_eeprom_init_rom(i2c[10], 0x50, 256, gb200nvl_bmc_fruid,
+                          gb200nvl_bmc_fruid_len);
+}
+
 static void fby35_i2c_init(AspeedMachineState *bmc)
 {
     AspeedSoCState *soc = bmc->soc;
@@ -1587,6 +1637,31 @@ static void aspeed_machine_bletchley_class_init(ObjectClass *oc,
     aspeed_machine_class_init_cpus_defaults(mc);
 }
 
+#define GB200NVL_BMC_RAM_SIZE ASPEED_RAM_SIZE(1 * GiB)
+
+static void aspeed_machine_gb200nvl_class_init(ObjectClass *oc,
+                                               const void *data)
+{
+    MachineClass *mc = MACHINE_CLASS(oc);
+    AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc);
+
+    mc->desc       = "Nvidia GB200NVL BMC (Cortex-A7)";
+    amc->soc_name  = "ast2600-a3";
+    amc->hw_strap1 = GB200NVL_BMC_HW_STRAP1;
+    amc->hw_strap2 = GB200NVL_BMC_HW_STRAP2;
+    amc->fmc_model = "mx66u51235f";
+    amc->spi_model = "mx66u51235f";
+    amc->num_cs    = 2;
+
+    amc->spi2_model = "mx66u51235f";
+    amc->num_cs2   = 1;
+    amc->macs_mask = ASPEED_MAC0_ON | ASPEED_MAC1_ON;
+    amc->i2c_init  = gb200nvl_bmc_i2c_init;
+    mc->default_ram_size = GB200NVL_BMC_RAM_SIZE;
+    aspeed_machine_class_init_cpus_defaults(mc);
+    aspeed_machine_ast2600_class_emmc_init(oc);
+}
+
 static void fby35_reset(MachineState *state, ResetType type)
 {
     AspeedMachineState *bmc = ASPEED_MACHINE(state);
@@ -1879,6 +1954,10 @@ static const TypeInfo aspeed_machine_types[] = {
         .name          = MACHINE_TYPE_NAME("bletchley-bmc"),
         .parent        = TYPE_ASPEED_MACHINE,
         .class_init    = aspeed_machine_bletchley_class_init,
+    }, {
+        .name          = MACHINE_TYPE_NAME("gb200nvl-bmc"),
+        .parent        = TYPE_ASPEED_MACHINE,
+        .class_init    = aspeed_machine_gb200nvl_class_init,
     }, {
         .name          = MACHINE_TYPE_NAME("fby35-bmc"),
         .parent        = MACHINE_TYPE_NAME("ast2600-evb"),
hw/arm/aspeed_eeprom.c +21 -0
index daa3d329d1..8bbbdec834 100644
@@ -162,6 +162,25 @@ const uint8_t rainier_bmc_fruid[] = {
     0x31, 0x50, 0x46, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00,
 };
 
+const uint8_t gb200nvl_bmc_fruid[] = {
+    0x01, 0x00, 0x00, 0x01, 0x0b, 0x00, 0x00, 0xf3, 0x01, 0x0a, 0x19, 0x1f,
+    0x0f, 0xe6, 0xc6, 0x4e, 0x56, 0x49, 0x44, 0x49, 0x41, 0xc5, 0x50, 0x33,
+    0x38, 0x30, 0x39, 0xcd, 0x31, 0x35, 0x38, 0x33, 0x33, 0x32, 0x34, 0x38,
+    0x30, 0x30, 0x31, 0x35, 0x30, 0xd2, 0x36, 0x39, 0x39, 0x2d, 0x31, 0x33,
+    0x38, 0x30, 0x39, 0x2d, 0x30, 0x34, 0x30, 0x34, 0x2d, 0x36, 0x30, 0x30,
+    0xc0, 0x01, 0x01, 0xd6, 0x4d, 0x41, 0x43, 0x3a, 0x20, 0x33, 0x43, 0x3a,
+    0x36, 0x44, 0x3a, 0x36, 0x36, 0x3a, 0x31, 0x34, 0x3a, 0x43, 0x38, 0x3a,
+    0x37, 0x41, 0xc1, 0x3b, 0x01, 0x09, 0x19, 0xc6, 0x4e, 0x56, 0x49, 0x44,
+    0x49, 0x41, 0xc9, 0x50, 0x33, 0x38, 0x30, 0x39, 0x2d, 0x42, 0x4d, 0x43,
+    0xd2, 0x36, 0x39, 0x39, 0x2d, 0x31, 0x33, 0x38, 0x30, 0x39, 0x2d, 0x30,
+    0x34, 0x30, 0x34, 0x2d, 0x36, 0x30, 0x30, 0xc4, 0x41, 0x45, 0x2e, 0x31,
+    0xcd, 0x31, 0x35, 0x38, 0x33, 0x33, 0x32, 0x34, 0x38, 0x30, 0x30, 0x31,
+    0x35, 0x30, 0xc0, 0xc4, 0x76, 0x30, 0x2e, 0x31, 0xc1, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0xb4, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
+
+};
+
 const size_t tiogapass_bmc_fruid_len = sizeof(tiogapass_bmc_fruid);
 const size_t fby35_nic_fruid_len = sizeof(fby35_nic_fruid);
 const size_t fby35_bb_fruid_len = sizeof(fby35_bb_fruid);
@@ -169,3 +188,5 @@ const size_t fby35_bmc_fruid_len = sizeof(fby35_bmc_fruid);
 const size_t yosemitev2_bmc_fruid_len = sizeof(yosemitev2_bmc_fruid);
 const size_t rainier_bb_fruid_len = sizeof(rainier_bb_fruid);
 const size_t rainier_bmc_fruid_len = sizeof(rainier_bmc_fruid);
+const size_t gb200nvl_bmc_fruid_len = sizeof(gb200nvl_bmc_fruid);
+
hw/arm/aspeed_eeprom.h +3 -0
index f08c16ef50..3ed9bc1d9a 100644
@@ -26,4 +26,7 @@ extern const size_t rainier_bb_fruid_len;
 extern const uint8_t rainier_bmc_fruid[];
 extern const size_t rainier_bmc_fruid_len;
 
+extern const uint8_t gb200nvl_bmc_fruid[];
+extern const size_t gb200nvl_bmc_fruid_len;
+
 #endif
Signature · 1 line
2.43.0
Reviewed-by on v2 3/4
#6 lore raw

Re: [PATCH v2 3/4] hw/arm/aspeed: Add GB200 BMC target

Quoted 6 lines · Ed Tanous

GB200nvl72 is a system for for accelerated compute. This is a model for the BMC target within the system.

This is based on the device tree aspeed-bmc-nvidia-gb200nvl-bmc.dts from:

Quoted 8 lines

[1] https://github.com/openbmc/linux/blob/dev-6.6/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts

---
  hw/arm/aspeed.c        | 79 ++++++++++++++++++++++++++++++++++++++++++
  hw/arm/aspeed_eeprom.c | 21 +++++++++++
  hw/arm/aspeed_eeprom.h |  3 ++
  3 files changed, 103 insertions(+)

Thanks,

C.

Quoted 173 lines
hw/arm/aspeed.c +79 -0
index 3ef7f6c5b2..98144ced86 100644
@@ -19,6 +19,7 @@
  #include "hw/i2c/i2c_mux_pca954x.h"
  #include "hw/i2c/smbus_eeprom.h"
  #include "hw/gpio/pca9552.h"
+#include "hw/gpio/pca9554.h"
  #include "hw/nvram/eeprom_at24c.h"
  #include "hw/sensor/tmp105.h"
  #include "hw/misc/led.h"
@@ -201,6 +202,10 @@ struct AspeedMachineState {
  #define BLETCHLEY_BMC_HW_STRAP1 AST2600_EVB_HW_STRAP1
  #define BLETCHLEY_BMC_HW_STRAP2 AST2600_EVB_HW_STRAP2
 
+/* GB200NVL hardware value */
+#define GB200NVL_BMC_HW_STRAP1 AST2600_EVB_HW_STRAP1
+#define GB200NVL_BMC_HW_STRAP2 AST2600_EVB_HW_STRAP2
+
  /* Qualcomm DC-SCM hardware value */
  #define QCOM_DC_SCM_V1_BMC_HW_STRAP1  0x00000000
  #define QCOM_DC_SCM_V1_BMC_HW_STRAP2  0x00000041
@@ -647,6 +652,12 @@ static void create_pca9552(AspeedSoCState *soc, int bus_id, int addr)
                              TYPE_PCA9552, addr);
  }
 
+static I2CSlave *create_pca9554(AspeedSoCState *soc, int bus_id, int addr)
+{
+    return i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, bus_id),
+                            TYPE_PCA9554, addr);
+}
+
  static void sonorapass_bmc_i2c_init(AspeedMachineState *bmc)
  {
      AspeedSoCState *soc = bmc->soc;
@@ -1052,6 +1063,45 @@ static void bletchley_bmc_i2c_init(AspeedMachineState *bmc)
      i2c_slave_create_simple(i2c[12], TYPE_PCA9552, 0x67);
  }
 
+
+static void gb200nvl_bmc_i2c_init(AspeedMachineState *bmc)
+{
+    AspeedSoCState *soc = bmc->soc;
+    I2CBus *i2c[15] = {};
+    DeviceState *dev;
+    for (int i = 0; i < sizeof(i2c) / sizeof(i2c[0]); i++) {
+        if ((i == 11) || (i == 12) || (i == 13)) {
+            continue;
+        }
+        i2c[i] = aspeed_i2c_get_bus(&soc->i2c, i);
+    }
+
+    /* Bus 5 Expander */
+    create_pca9554(soc, 4, 0x21);
+
+    /* Mux I2c Expanders */
+    i2c_slave_create_simple(i2c[5], "pca9546", 0x71);
+    i2c_slave_create_simple(i2c[5], "pca9546", 0x72);
+    i2c_slave_create_simple(i2c[5], "pca9546", 0x73);
+    i2c_slave_create_simple(i2c[5], "pca9546", 0x75);
+    i2c_slave_create_simple(i2c[5], "pca9546", 0x76);
+    i2c_slave_create_simple(i2c[5], "pca9546", 0x77);
+
+    /* Bus 10 */
+    dev = DEVICE(create_pca9554(soc, 9, 0x20));
+
+    /* Set FPGA_READY */
+    object_property_set_str(OBJECT(dev), "pin1", "high", &error_fatal);
+
+    create_pca9554(soc, 9, 0x21);
+    at24c_eeprom_init(i2c[9], 0x50, 64 * KiB);
+    at24c_eeprom_init(i2c[9], 0x51, 64 * KiB);
+
+    /* Bus 11 */
+    at24c_eeprom_init_rom(i2c[10], 0x50, 256, gb200nvl_bmc_fruid,
+                          gb200nvl_bmc_fruid_len);
+}
+
  static void fby35_i2c_init(AspeedMachineState *bmc)
  {
      AspeedSoCState *soc = bmc->soc;
@@ -1587,6 +1637,31 @@ static void aspeed_machine_bletchley_class_init(ObjectClass *oc,
      aspeed_machine_class_init_cpus_defaults(mc);
  }
 
+#define GB200NVL_BMC_RAM_SIZE ASPEED_RAM_SIZE(1 * GiB)
+
+static void aspeed_machine_gb200nvl_class_init(ObjectClass *oc,
+                                               const void *data)
+{
+    MachineClass *mc = MACHINE_CLASS(oc);
+    AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc);
+
+    mc->desc       = "Nvidia GB200NVL BMC (Cortex-A7)";
+    amc->soc_name  = "ast2600-a3";
+    amc->hw_strap1 = GB200NVL_BMC_HW_STRAP1;
+    amc->hw_strap2 = GB200NVL_BMC_HW_STRAP2;
+    amc->fmc_model = "mx66u51235f";
+    amc->spi_model = "mx66u51235f";
+    amc->num_cs    = 2;
+
+    amc->spi2_model = "mx66u51235f";
+    amc->num_cs2   = 1;
+    amc->macs_mask = ASPEED_MAC0_ON | ASPEED_MAC1_ON;
+    amc->i2c_init  = gb200nvl_bmc_i2c_init;
+    mc->default_ram_size = GB200NVL_BMC_RAM_SIZE;
+    aspeed_machine_class_init_cpus_defaults(mc);
+    aspeed_machine_ast2600_class_emmc_init(oc);
+}
+
  static void fby35_reset(MachineState *state, ResetType type)
  {
      AspeedMachineState *bmc = ASPEED_MACHINE(state);
@@ -1879,6 +1954,10 @@ static const TypeInfo aspeed_machine_types[] = {
          .name          = MACHINE_TYPE_NAME("bletchley-bmc"),
          .parent        = TYPE_ASPEED_MACHINE,
          .class_init    = aspeed_machine_bletchley_class_init,
+    }, {
+        .name          = MACHINE_TYPE_NAME("gb200nvl-bmc"),
+        .parent        = TYPE_ASPEED_MACHINE,
+        .class_init    = aspeed_machine_gb200nvl_class_init,
      }, {
          .name          = MACHINE_TYPE_NAME("fby35-bmc"),
          .parent        = MACHINE_TYPE_NAME("ast2600-evb"),
hw/arm/aspeed_eeprom.c +21 -0
index daa3d329d1..8bbbdec834 100644
@@ -162,6 +162,25 @@ const uint8_t rainier_bmc_fruid[] = {
      0x31, 0x50, 0x46, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00,
  };
 
+const uint8_t gb200nvl_bmc_fruid[] = {
+    0x01, 0x00, 0x00, 0x01, 0x0b, 0x00, 0x00, 0xf3, 0x01, 0x0a, 0x19, 0x1f,
+    0x0f, 0xe6, 0xc6, 0x4e, 0x56, 0x49, 0x44, 0x49, 0x41, 0xc5, 0x50, 0x33,
+    0x38, 0x30, 0x39, 0xcd, 0x31, 0x35, 0x38, 0x33, 0x33, 0x32, 0x34, 0x38,
+    0x30, 0x30, 0x31, 0x35, 0x30, 0xd2, 0x36, 0x39, 0x39, 0x2d, 0x31, 0x33,
+    0x38, 0x30, 0x39, 0x2d, 0x30, 0x34, 0x30, 0x34, 0x2d, 0x36, 0x30, 0x30,
+    0xc0, 0x01, 0x01, 0xd6, 0x4d, 0x41, 0x43, 0x3a, 0x20, 0x33, 0x43, 0x3a,
+    0x36, 0x44, 0x3a, 0x36, 0x36, 0x3a, 0x31, 0x34, 0x3a, 0x43, 0x38, 0x3a,
+    0x37, 0x41, 0xc1, 0x3b, 0x01, 0x09, 0x19, 0xc6, 0x4e, 0x56, 0x49, 0x44,
+    0x49, 0x41, 0xc9, 0x50, 0x33, 0x38, 0x30, 0x39, 0x2d, 0x42, 0x4d, 0x43,
+    0xd2, 0x36, 0x39, 0x39, 0x2d, 0x31, 0x33, 0x38, 0x30, 0x39, 0x2d, 0x30,
+    0x34, 0x30, 0x34, 0x2d, 0x36, 0x30, 0x30, 0xc4, 0x41, 0x45, 0x2e, 0x31,
+    0xcd, 0x31, 0x35, 0x38, 0x33, 0x33, 0x32, 0x34, 0x38, 0x30, 0x30, 0x31,
+    0x35, 0x30, 0xc0, 0xc4, 0x76, 0x30, 0x2e, 0x31, 0xc1, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0xb4, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
+
+};
+
  const size_t tiogapass_bmc_fruid_len = sizeof(tiogapass_bmc_fruid);
  const size_t fby35_nic_fruid_len = sizeof(fby35_nic_fruid);
  const size_t fby35_bb_fruid_len = sizeof(fby35_bb_fruid);
@@ -169,3 +188,5 @@ const size_t fby35_bmc_fruid_len = sizeof(fby35_bmc_fruid);
  const size_t yosemitev2_bmc_fruid_len = sizeof(yosemitev2_bmc_fruid);
  const size_t rainier_bb_fruid_len = sizeof(rainier_bb_fruid);
  const size_t rainier_bmc_fruid_len = sizeof(rainier_bmc_fruid);
+const size_t gb200nvl_bmc_fruid_len = sizeof(gb200nvl_bmc_fruid);
+
hw/arm/aspeed_eeprom.h +3 -0
index f08c16ef50..3ed9bc1d9a 100644
@@ -26,4 +26,7 @@ extern const size_t rainier_bb_fruid_len;
  extern const uint8_t rainier_bmc_fruid[];
  extern const size_t rainier_bmc_fruid_len;
 
+extern const uint8_t gb200nvl_bmc_fruid[];
+extern const size_t gb200nvl_bmc_fruid_len;
+
  #endif
author
#7 lore raw

PATCH v2 4/4 tests/functional: Add gb200 tests

In reply to Ed Tanous

To support the newly added gb200 machine, add appropriate tests.

---
 tests/functional/aspeed.py                    |  9 +++++--
 tests/functional/meson.build                  |  2 ++
 .../test_arm_aspeed_gb200nvl_bmc.py           | 26 +++++++++++++++++++
 3 files changed, 35 insertions(+), 2 deletions(-)
 create mode 100755 tests/functional/test_arm_aspeed_gb200nvl_bmc.py
tests/functional/aspeed.py +7 -2
index 7a40d5dda7..b131703c52 100644
@@ -8,8 +8,13 @@
 class AspeedTest(LinuxKernelTest):
 
     def do_test_arm_aspeed_openbmc(self, machine, image, uboot='2019.04',
-                                   cpu_id='0x0', soc='AST2500 rev A1'):
-        hostname = machine.removesuffix('-bmc')
+                                   cpu_id='0x0', soc='AST2500 rev A1',
+                                   image_hostname=None):
+        # Allow for the image hostname to not end in "-bmc"
+        if image_hostname is not None:
+            hostname = image_hostname
+        else:
+            hostname = machine.removesuffix('-bmc')
 
         self.set_machine(machine)
         self.vm.set_console()
tests/functional/meson.build +2 -0
index 85158562a2..d2864543a5 100644
@@ -32,6 +32,7 @@ test_timeouts = {
   'arm_aspeed_ast2500' : 720,
   'arm_aspeed_ast2600' : 1200,
   'arm_aspeed_bletchley' : 480,
+  'arm_aspeed_gb200nvl_bmc' : 480,
   'arm_aspeed_rainier' : 480,
   'arm_bpim2u' : 500,
   'arm_collie' : 180,
@@ -126,6 +127,7 @@ tests_arm_system_thorough = [
   'arm_aspeed_ast2500',
   'arm_aspeed_ast2600',
   'arm_aspeed_bletchley',
+  'arm_aspeed_gb200nvl_bmc',
   'arm_aspeed_rainier',
   'arm_bpim2u',
   'arm_canona1100',
tests/functional/test_arm_aspeed_gb200nvl_bmc.py new file +26 -0
new file mode 100755
index 0000000000..8e8e3f05c1
@@ -0,0 +1,26 @@
+#!/usr/bin/env python3
+#
+# Functional test that boots the ASPEED machines
+#
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+from qemu_test import Asset
+from aspeed import AspeedTest
+
+
+class GB200Machine(AspeedTest):
+
+    ASSET_GB200_FLASH = Asset(
+        'https://github.com/legoater/qemu-aspeed-boot/raw/refs/heads/master/images/gb200nvl-obmc/obmc-phosphor-image-gb200nvl-obmc-20250702182348.static.mtd.xz',
+        'b84819317cb3dc762895ad507705978ef000bfc77c50c33a63bdd37921db0dbc')
+
+    def test_arm_aspeed_gb200_openbmc(self):
+        image_path = self.uncompress(self.ASSET_GB200_FLASH)
+
+        self.do_test_arm_aspeed_openbmc('gb200nvl-bmc', image=image_path,
+                                        uboot='2019.04', cpu_id='0xf00',
+                                        soc='AST2600 rev A3',
+                                        image_hostname='gb200nvl-obmc')
+
+if __name__ == '__main__':
+    AspeedTest.main()
Signature · 1 line
2.43.0
#8 lore raw

Re: [PATCH v2 4/4] tests/functional: Add gb200 tests

Quoted 17 lines · Ed Tanous

To support the newly added gb200 machine, add appropriate tests.

---
  tests/functional/aspeed.py                    |  9 +++++--
  tests/functional/meson.build                  |  2 ++
  .../test_arm_aspeed_gb200nvl_bmc.py           | 26 +++++++++++++++++++
  3 files changed, 35 insertions(+), 2 deletions(-)

create mode 100755 tests/functional/test_arm_aspeed_gb200nvl_bmc.py

tests/functional/aspeed.py +0 -0
index 7a40d5dda7..b131703c52 100644
@@ -8,8 +8,13 @@
  class AspeedTest(LinuxKernelTest):
 

tests/functional/aspeed.py line 17

Quoted 10 lines
tests/functional/aspeed.py +7 -2
      def do_test_arm_aspeed_openbmc(self, machine, image, uboot='2019.04',
-                                   cpu_id='0x0', soc='AST2500 rev A1'):
-        hostname = machine.removesuffix('-bmc')
+                                   cpu_id='0x0', soc='AST2500 rev A1',
+                                   image_hostname=None):
+        # Allow for the image hostname to not end in "-bmc"
+        if image_hostname is not None:
+            hostname = image_hostname
+        else:
+            hostname = machine.removesuffix('-bmc')

This change belongs to another patch and it doesn't seem that this series needs it. Does it ?

Thanks,

C.

Quoted 54 lines
tests/functional/aspeed.py +0 -0
          self.set_machine(machine)
          self.vm.set_console()
tests/functional/meson.build +2 -0
index 85158562a2..d2864543a5 100644
@@ -32,6 +32,7 @@ test_timeouts = {
    'arm_aspeed_ast2500' : 720,
    'arm_aspeed_ast2600' : 1200,
    'arm_aspeed_bletchley' : 480,
+  'arm_aspeed_gb200nvl_bmc' : 480,
    'arm_aspeed_rainier' : 480,
    'arm_bpim2u' : 500,
    'arm_collie' : 180,
@@ -126,6 +127,7 @@ tests_arm_system_thorough = [
    'arm_aspeed_ast2500',
    'arm_aspeed_ast2600',
    'arm_aspeed_bletchley',
+  'arm_aspeed_gb200nvl_bmc',
    'arm_aspeed_rainier',
    'arm_bpim2u',
    'arm_canona1100',
tests/functional/test_arm_aspeed_gb200nvl_bmc.py new file +26 -0
new file mode 100755
index 0000000000..8e8e3f05c1
@@ -0,0 +1,26 @@
+#!/usr/bin/env python3
+#
+# Functional test that boots the ASPEED machines
+#
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+from qemu_test import Asset
+from aspeed import AspeedTest
+
+
+class GB200Machine(AspeedTest):
+
+    ASSET_GB200_FLASH = Asset(
+        'https://github.com/legoater/qemu-aspeed-boot/raw/refs/heads/master/images/gb200nvl-obmc/obmc-phosphor-image-gb200nvl-obmc-20250702182348.static.mtd.xz',
+        'b84819317cb3dc762895ad507705978ef000bfc77c50c33a63bdd37921db0dbc')
+
+    def test_arm_aspeed_gb200_openbmc(self):
+        image_path = self.uncompress(self.ASSET_GB200_FLASH)
+
+        self.do_test_arm_aspeed_openbmc('gb200nvl-bmc', image=image_path,
+                                        uboot='2019.04', cpu_id='0xf00',
+                                        soc='AST2600 rev A3',
+                                        image_hostname='gb200nvl-obmc')
+
+if __name__ == '__main__':
+    AspeedTest.main()
#9 lore raw

Re: [PATCH v2 4/4] tests/functional: Add gb200 tests

Quoted 23 lines · Cédric Le Goater
Quoted 22 lines · Ed Tanous

To support the newly added gb200 machine, add appropriate tests.

---
  tests/functional/aspeed.py                    |  9 +++++--
  tests/functional/meson.build                  |  2 ++
  .../test_arm_aspeed_gb200nvl_bmc.py           | 26 +++++++++++++++++++
  3 files changed, 35 insertions(+), 2 deletions(-)

create mode 100755 tests/functional/test_arm_aspeed_gb200nvl_bmc.py

tests/functional/aspeed.py +3 -2
index 7a40d5dda7..b131703c52 100644
@@ -8,8 +8,13 @@
  class AspeedTest(LinuxKernelTest):
      def do_test_arm_aspeed_openbmc(self, machine, image, uboot='2019.04',
-                                   cpu_id='0x0', soc='AST2500 rev A1'):
-        hostname = machine.removesuffix('-bmc')
+                                   cpu_id='0x0', soc='AST2500 rev A1',
+                                   image_hostname=None):
+        # Allow for the image hostname to not end in "-bmc"
Quoted 8 lines

tests/functional/aspeed.py line 17

Quoted 4 lines
tests/functional/aspeed.py +4 -0
+        if image_hostname is not None:
+            hostname = image_hostname
+        else:
+            hostname = machine.removesuffix('-bmc')

This change belongs to another patch and it doesn't seem that this series needs it. Does it ?

I Should've been made more clear in the commit message, but yes, this is required because the hostname of this system is gb200nvl-obmc, so removing the postfix of -bmc fails, and the test fails because of it. This code allows adding an opt-in param to handle the different string. I can break it out into its own commit if that's an issue.

Quoted 63 lines

Thanks,

C.

Quoted 54 lines
tests/functional/aspeed.py +0 -0
          self.set_machine(machine)
          self.vm.set_console()
tests/functional/meson.build +2 -0
index 85158562a2..d2864543a5 100644
@@ -32,6 +32,7 @@ test_timeouts = {
    'arm_aspeed_ast2500' : 720,
    'arm_aspeed_ast2600' : 1200,
    'arm_aspeed_bletchley' : 480,
+  'arm_aspeed_gb200nvl_bmc' : 480,
    'arm_aspeed_rainier' : 480,
    'arm_bpim2u' : 500,
    'arm_collie' : 180,
@@ -126,6 +127,7 @@ tests_arm_system_thorough = [
    'arm_aspeed_ast2500',
    'arm_aspeed_ast2600',
    'arm_aspeed_bletchley',
+  'arm_aspeed_gb200nvl_bmc',
    'arm_aspeed_rainier',
    'arm_bpim2u',
    'arm_canona1100',
tests/functional/test_arm_aspeed_gb200nvl_bmc.py new file +26 -0
new file mode 100755
index 0000000000..8e8e3f05c1
@@ -0,0 +1,26 @@
+#!/usr/bin/env python3
+#
+# Functional test that boots the ASPEED machines
+#
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+from qemu_test import Asset
+from aspeed import AspeedTest
+
+
+class GB200Machine(AspeedTest):
+
+    ASSET_GB200_FLASH = Asset(
+        'https://github.com/legoater/qemu-aspeed-boot/raw/refs/heads/master/images/gb200nvl-obmc/obmc-phosphor-image-gb200nvl-obmc-20250702182348.static.mtd.xz',
+        'b84819317cb3dc762895ad507705978ef000bfc77c50c33a63bdd37921db0dbc')
+
+    def test_arm_aspeed_gb200_openbmc(self):
+        image_path = self.uncompress(self.ASSET_GB200_FLASH)
+
+        self.do_test_arm_aspeed_openbmc('gb200nvl-bmc', image=image_path,
+                                        uboot='2019.04', cpu_id='0xf00',
+                                        soc='AST2600 rev A3',
+                                        image_hostname='gb200nvl-obmc')
+
+if __name__ == '__main__':
+    AspeedTest.main()
Reviewed-by
#10 lore raw

Re: [PATCH v2 4/4] tests/functional: Add gb200 tests

Quoted 33 lines · Ed Tanous
Quoted 23 lines · Cédric Le Goater
Quoted 22 lines · Ed Tanous

To support the newly added gb200 machine, add appropriate tests.

---
   tests/functional/aspeed.py                    |  9 +++++--
   tests/functional/meson.build                  |  2 ++
   .../test_arm_aspeed_gb200nvl_bmc.py           | 26 +++++++++++++++++++
   3 files changed, 35 insertions(+), 2 deletions(-)

create mode 100755 tests/functional/test_arm_aspeed_gb200nvl_bmc.py

tests/functional/aspeed.py +3 -2
index 7a40d5dda7..b131703c52 100644
@@ -8,8 +8,13 @@
   class AspeedTest(LinuxKernelTest):
       def do_test_arm_aspeed_openbmc(self, machine, image, uboot='2019.04',
-                                   cpu_id='0x0', soc='AST2500 rev A1'):
-        hostname = machine.removesuffix('-bmc')
+                                   cpu_id='0x0', soc='AST2500 rev A1',
+                                   image_hostname=None):
+        # Allow for the image hostname to not end in "-bmc"
Quoted 8 lines

tests/functional/aspeed.py line 17

Quoted 4 lines
tests/functional/aspeed.py +4 -0
+        if image_hostname is not None:
+            hostname = image_hostname
+        else:
+            hostname = machine.removesuffix('-bmc')

This change belongs to another patch and it doesn't seem that this series needs it. Does it ?

Quoted 2 lines

I Should've been made more clear in the commit message, but yes, this is required because the hostname of this system is gb200nvl-obmc,

Ah. I was looking at the QEMU machine name : gb200nvl-bmc

Quoted 4 lines

so
removing the postfix of -bmc fails, and the test fails because of it. This code allows adding an opt-in param to handle the different string. I can break it out into its own commit if that's an issue.

No it's fine.

Thanks,

C.

Quoted 64 lines
Quoted 64 lines

Thanks,

C.

Quoted 54 lines
tests/functional/aspeed.py +0 -0
           self.set_machine(machine)
           self.vm.set_console()
tests/functional/meson.build +2 -0
index 85158562a2..d2864543a5 100644
@@ -32,6 +32,7 @@ test_timeouts = {
     'arm_aspeed_ast2500' : 720,
     'arm_aspeed_ast2600' : 1200,
     'arm_aspeed_bletchley' : 480,
+  'arm_aspeed_gb200nvl_bmc' : 480,
     'arm_aspeed_rainier' : 480,
     'arm_bpim2u' : 500,
     'arm_collie' : 180,
@@ -126,6 +127,7 @@ tests_arm_system_thorough = [
     'arm_aspeed_ast2500',
     'arm_aspeed_ast2600',
     'arm_aspeed_bletchley',
+  'arm_aspeed_gb200nvl_bmc',
     'arm_aspeed_rainier',
     'arm_bpim2u',
     'arm_canona1100',
tests/functional/test_arm_aspeed_gb200nvl_bmc.py new file +26 -0
new file mode 100755
index 0000000000..8e8e3f05c1
@@ -0,0 +1,26 @@
+#!/usr/bin/env python3
+#
+# Functional test that boots the ASPEED machines
+#
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+from qemu_test import Asset
+from aspeed import AspeedTest
+
+
+class GB200Machine(AspeedTest):
+
+    ASSET_GB200_FLASH = Asset(
+        'https://github.com/legoater/qemu-aspeed-boot/raw/refs/heads/master/images/gb200nvl-obmc/obmc-phosphor-image-gb200nvl-obmc-20250702182348.static.mtd.xz',
+        'b84819317cb3dc762895ad507705978ef000bfc77c50c33a63bdd37921db0dbc')
+
+    def test_arm_aspeed_gb200_openbmc(self):
+        image_path = self.uncompress(self.ASSET_GB200_FLASH)
+
+        self.do_test_arm_aspeed_openbmc('gb200nvl-bmc', image=image_path,
+                                        uboot='2019.04', cpu_id='0xf00',
+                                        soc='AST2600 rev A3',
+                                        image_hostname='gb200nvl-obmc')
+
+if __name__ == '__main__':
+    AspeedTest.main()
#11 lore raw
In reply to Ed Tanous
Quoted 8 lines · Ed Tanous

This patch series adds support for gb200-bmc, a baseboard management controller module based on an Aspeed 2600 SOC.

v2:
- Rebase on master
- Drop duplicated patch for enabling PCA954X
- Updated commit message with source information
- Added functional tests and example openbmc image

Please try to collect the Reviewed-by trailers of the previous series when you resend.

Thanks,

C.

Quoted 18 lines

Ed Tanous (4):
hw/arm/aspeed: Add second SPI chip to Aspeed model
docs: add support for gb200-bmc hw/arm/aspeed: Add GB200 BMC target tests/functional: Add gb200 tests

  docs/system/arm/aspeed.rst                    |  4 +-
  hw/arm/aspeed.c                               | 81 +++++++++++++++++++
  hw/arm/aspeed_eeprom.c                        | 21 +++++
  hw/arm/aspeed_eeprom.h                        |  3 +
  include/hw/arm/aspeed.h                       |  2 +
  tests/functional/aspeed.py                    |  9 ++-
  tests/functional/meson.build                  |  2 +
  .../test_arm_aspeed_gb200nvl_bmc.py           | 26 ++++++
  8 files changed, 144 insertions(+), 4 deletions(-)

create mode 100755 tests/functional/test_arm_aspeed_gb200nvl_bmc.py

#12 lore raw
Quoted 11 lines · Cédric Le Goater
Quoted 8 lines · Ed Tanous

This patch series adds support for gb200-bmc, a baseboard management controller module based on an Aspeed 2600 SOC.

v2:
- Rebase on master
- Drop duplicated patch for enabling PCA954X
- Updated commit message with source information
- Added functional tests and example openbmc image

Quoted 2 lines

Please try to collect the Reviewed-by trailers of the previous series when you resend.

ACK. Can do in the next series. I had erroneously thought that git-publish pulled that from the thread.

Quoted 26 lines

Thanks,

C.

Quoted 18 lines

Ed Tanous (4):
hw/arm/aspeed: Add second SPI chip to Aspeed model
docs: add support for gb200-bmc hw/arm/aspeed: Add GB200 BMC target tests/functional: Add gb200 tests

  docs/system/arm/aspeed.rst                    |  4 +-
  hw/arm/aspeed.c                               | 81 +++++++++++++++++++
  hw/arm/aspeed_eeprom.c                        | 21 +++++
  hw/arm/aspeed_eeprom.h                        |  3 +
  include/hw/arm/aspeed.h                       |  2 +
  tests/functional/aspeed.py                    |  9 ++-
  tests/functional/meson.build                  |  2 +
  .../test_arm_aspeed_gb200nvl_bmc.py           | 26 ++++++
  8 files changed, 144 insertions(+), 4 deletions(-)

create mode 100755 tests/functional/test_arm_aspeed_gb200nvl_bmc.py

#13 lore raw
In reply to Ed Tanous
Quoted 24 lines · Ed Tanous

This patch series adds support for gb200-bmc, a baseboard management controller module based on an Aspeed 2600 SOC.

v2:
- Rebase on master
- Drop duplicated patch for enabling PCA954X
- Updated commit message with source information
- Added functional tests and example openbmc image

Ed Tanous (4):
hw/arm/aspeed: Add second SPI chip to Aspeed model
docs: add support for gb200-bmc hw/arm/aspeed: Add GB200 BMC target tests/functional: Add gb200 tests

  docs/system/arm/aspeed.rst                    |  4 +-
  hw/arm/aspeed.c                               | 81 +++++++++++++++++++
  hw/arm/aspeed_eeprom.c                        | 21 +++++
  hw/arm/aspeed_eeprom.h                        |  3 +
  include/hw/arm/aspeed.h                       |  2 +
  tests/functional/aspeed.py                    |  9 ++-
  tests/functional/meson.build                  |  2 +
  .../test_arm_aspeed_gb200nvl_bmc.py           | 26 ++++++
  8 files changed, 144 insertions(+), 4 deletions(-)
Quoted 2 lines

create mode 100755 tests/functional/test_arm_aspeed_gb200nvl_bmc.py

Applied to aspeed-next.

Thanks,

C.