monitoring multipath arrays plus inconsistent /proc/mdstat?
Hello,
mdadm --monitor or mdadm --follow does not report anything if a link to my multipath array fails, which makes sense at times. (?)
On rhel 2.1 at least, sometimes I have seen that /proc/mdstat is not consistent as in this case, it has marked /dev/sdi as failed, where as mdadm -D on md3 has reported both links to be active, and in fact is using the "failed link" in mdstat as the active path..!!
------------------from /proc/mdstat--------------------------------------- md3 : active multipath sdd[1] sdi[0](F)
----------------from mdadm o/p-------------------------- [root@tlr root]# mdadm -D /dev/md3/dev/md3:
<snip>
<snip>
Number Major Minor RaidDevice State
0 8 128 0 active sync /dev/sdi
1 8 48 1 spare /dev/sdd
----------------------------------------------------------------------------
Whom to trust here? How do we monitor multipath arrays effectively?
--Matt
Quoted 1 line · Anu Matthew
Whom to trust here? How do we monitor multipath arrays effectively?
On 2.6, use multipath-tools, which are seeing active development. multipath storage is being moved to the Device-Mapper in 2.6.
Sincerely,
Lars Marowsky-Brée <[email protected]>
Signature · 8 lines
High Availability & Clustering SUSE Labs, Research and Development SUSE LINUX AG - A Novell company - To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 6 lines · Lars Marowsky-Bree
Quoted 1 line · Anu Matthew
Whom to trust here? How do we monitor multipath arrays effectively?
On 2.6, use multipath-tools, which are seeing active development. multipath storage is being moved to the Device-Mapper in 2.6.
Is it stable? the version number increasing quite rapidly... I woud like to use it with emc clariion, dual HBA (qlogic) environment. Afaik emc powerpath dont's support 2.6.x kernels, is it?
Bye, -=Lajbi=----------------------------------------------------------------
LAJBER Zoltan Szent Istvan Egyetem, Informatika Hivatal
optimism is having a ups on a win95 box
On 2004-10-22T07:41:37, Lajber Zoltan <[email protected]> wrote:
(Your mailer is messing up the To: line. Please fix.)
Quoted 4 lines
Quoted 3 lines
Quoted 1 line
Whom to trust here? How do we monitor multipath arrays effectively?
On 2.6, use multipath-tools, which are seeing active development. multipath storage is being moved to the Device-Mapper in 2.6.
Is it stable? the version number increasing quite rapidly...
Well, it's actively being developed right now, as always.
Quoted 1 line
I woud like to use it with emc clariion, dual HBA (qlogic) environment.
EMC CLARiiON active/passive failover support is forthcoming.
Quoted 1 line
Afaik emc powerpath dont's support 2.6.x kernels, is it?
No, and as far as I know, it's not going to.
I got technical docs + a CX500 from EMC for developing the CLARiiON support and am busy with just that (if I wasn't writing this mail ;-).
The commandline tools have already been merged upstream, so if you use sg3_utils, you'll find that sg_inq is able to decode the EMC-specific Unit Path Report Page and that you can manually switch Service-Processors for a LUN using the sg_emc_trespass command.
Alasdair and I are ping-ponging patches for the dm-mpath.c, and I think we should have it done fairly soon...
Sincerely,
Lars Marowsky-Brée <[email protected]>
Signature · 8 lines
High Availability & Clustering SUSE Labs, Research and Development SUSE LINUX AG - A Novell company - To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
<snip>
Afaik emc powerpath dont's support 2.6.x kernels, is it?
No, and as far as I know, it's not going to.
<snip>
May I ask, why? We are to evaluate Power Path also for 2.4, and am just curious why it is not going to run on 2.6? That could be a very important factor in decision making if it won't make it on 2.6.x
Thanks in advance,
Anu Matthew
Quoted 3 lines · Anu Matthew
May I ask, why? We are to evaluate Power Path also for 2.4, and am just curious why it is not going to run on 2.6? That could be a very important factor in decision making if it won't make it on 2.6.x
Because EMC is very forthcoming about supporting the proper way of doing multipathing on Linux in 2.6 (based on the Open Source Device-Mapper multipath functionality + the multipath-tools package) and actively supporting me developing that feature by providing technical specs and hardware, I don't really see a need for using Power Path any longer on 2.6 platforms.
I could understand that they may want to provide it for legacy installations who want to slowly transition though, but they've not mentioned it yet; personally I'd think it would be kind of pointless ;-)
Sincerely,
Lars Marowsky-Brée <[email protected]>
Signature · 8 lines
High Availability & Clustering SUSE Labs, Research and Development SUSE LINUX AG - A Novell company - To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html