parport not working in 2.6.9
Hello,
I've noticed that parallel port stopped working for me with 2.6.9. It works with 2.6.8.1 using the same .config - the relevant part:CONFIG_PARPORT=yCONFIG_PARPORT_PC=yCONFIG_PARPORT_PC_CML1=y
# CONFIG_PARPORT_SERIAL is not setCONFIG_PARPORT_PC_FIFO=yCONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_OTHER is not setCONFIG_PARPORT_1284=y
I've noticed that there's "smsc parport" instead of parport0 in /proc/ioports and new smsc_check range but the 0778-077a range is no longer there. My board has SMC Super I/O chip.
Here's "diff ioports-2.6.8.1 ioports-2.6.9" output:
3c3,4
< 0040-005f : timer
---
Quoted 2 lines
0040-0043 : timer0
0050-0053 : timer1
19c20
< 0378-037a : parport0
---
Quoted 1 line
0378-037a : smsc parport
22a24
Quoted 1 line
03f0-03f2 :
smsc_check
25d26
< 0778-077a : parport0
29c30,33
< 4008-400b : ACPI timer
---
Quoted 4 lines
4000-4003 :
PM1a_EVT_BLK
4004-4005 :PM1a_CNT_BLK
4008-400b :PM_TMR
400c-400f :GPE0_BLK
I also see some new ACPI errors during 2.6.9 startup:
ACPI: Subsystem revision 20040816
ACPI-0205: *** Error: Return object type is incorrect [\_SB_.PCI0.ISA_.UAR1._PRW] (Node c7f89f40), AE_TYPE
ACPI-0205: *** Error: Return object type is incorrect [\_SB_.PCI0.ISA_.UAR2._PRW] (Node c7f89e20), AE_TYPE
ACPI-0205: *** Error: Return object type is incorrect [\_SB_.PCI0.ISA_.LPT_._PRW] (Node c7f89c40), AE_TYPE
and this:
parport: PnPBIOS parport detected.
pnp: Device 00:0e disabled.
In 2.6.8.1, it's correct:
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
lp0: using parport0 (interrupt-driven).
If more details are needed, just ask.
Signature · 1 line
Ondrej Zary
Quoted 1 line · Ondrej Zary
I've noticed that parallel port stopped working for me with 2.6.9. It works with 2.6.8.1
This was already discussed, a fix should be in 2.6.10-rc1.
Paul Slootman
Quoted 5 lines · Paul Slootman
Quoted 1 line · Ondrej Zary
I've noticed that parallel port stopped working for me with 2.6.9. It works with 2.6.8.1
This was already discussed, a fix should be in 2.6.10-rc1.
And 2.6.9-ac which also has a pile of security holes and other things fixed versus 2.6.9
Quoted 7 lines · Paul Slootman
Quoted 1 line · Ondrej Zary
I've noticed that parallel port stopped working for me with 2.6.9. It works with 2.6.8.1
This was already discussed, a fix should be in 2.6.10-rc1.
Thanks, 2.6.10-rc1 works fine.
Signature · 1 line
Ondrej Zary