Skip to contentSkip to conversation

Fixing page allocation failure

DISCUSSION Morten W. Petersen 3 participants 5 messages Nov 18, 2004 – Nov 20, 2004

lore
Share & tools
lore
#0 lore raw

Hi all,

I have a server that a couple of times each day squirts out messages about page allocation failures (python: page allocation failure. order:3, mode:0x20). What's the reason for this, and could it affect the stability of the box?

The server that squirts these messages just crashed, for no apparent reason, so that's why I'm wondering. It's a UML box. Also, I'm wondering, are there any howto's for tweaking /proc settings so that the machine becomes more stable? Are there any settings for increasing the verbosity of the kernel log so that the reason for a server crashing is easier to find?

Thanks in advance, and please CC me any replies :)

Regards,

Morten

#1 lore raw
Quoted 11 lines · Morten W. Petersen

Hi all,

I have a server that a couple of times each day squirts out messages about page allocation failures (python: page allocation failure. order:3, mode:0x20). What's the reason for this, and could it affect the stability of the box?

The server that squirts these messages just crashed, for no apparent reason, so that's why I'm wondering. It's a UML box. Also, I'm wondering, are there any howto's for tweaking /proc settings so that the machine becomes more stable? Are there any settings for increasing the verbosity of the kernel log so that the reason for a server crashing is easier to find?

Thanks in advance, and please CC me any replies :)

Regards,

Morten

Yeah you can increase /proc/sys/vm/min_free_kbytes to help the problem.

There is a possibly better solution in the -mm kernels which should get merged into 2.6 sooner or later - but there is still no way to guarantee safety from allocation failures. If they cause crashes then that is a bug, so report them here with traces and a description of the workload and system hardware, etc.

Thanks
Nick

#2 lore raw
In reply to Morten W. Petersen
Quoted 4 lines · Morten W. Petersen

I have a server that a couple of times each day squirts out messages
about page allocation failures (python: page allocation failure. order:3, mode:0x20).

It should also emit a stack backtrace. If so, please send it.

#3 lore raw
Quoted 1 line · Andrew Morton

It should also emit a stack backtrace. If so, please send it.

OK, I've attached the kern.log file, which should explain the setup and has some call traces. The server has about 300-350 MBs of RAM, 500 MBs of swap, and typically uses about 2-300MBs of swap at any given time.

It's recorded load average is typically between 0.1 and 0.2, at times up to 1.0.

I've got some additional kern.log files if you're interested.

HTH,

Morten

PS: I this is the second copy of this message, the first one I sent didn't come through.

#4 lore raw
Quoted 5 lines · Morten W. Petersen
Quoted 1 line · Andrew Morton

It should also emit a stack backtrace. If so, please send it.

OK, I've attached the kern.log file

That's just a bunch of hex numbers. Please enable CONFIG_KALLSYMS and resend.