Skip to contentSkip to conversation

error opening /dev/md2: No such file or directory

DISCUSSION Robin Bowes 3 participants 4 messages Dec 2, 2004 MD RAID

lore
Share & tools
lore
#0 lore raw

Hi,

I suspect this is not an mdadm problem but I am hoping someone can point me in the right direction...

I was running Fedora Core 2 and upgraded to Fedora Core 3 but am having problems following the upgrade (it won't boot due to some kernel issues). So, I thought I'd try a fresh install.

I'm tring to create a RAID1 array from a couple of spare 1.5GB partitions onto which I can put the fresh O/S install.

I used this command:

# mdadm --create /dev/md2 --level=1 --raid-devices=2 /dev/sdc1 missing
mdadm: error opening /dev/md2: No such file or directory

I've used "missing" since the other spare partition is on /dev/sdf which is being RMA'd at the moment - guess what make it is :)

The new FC3 system is running udev with which I'm not familiar.

How can I create the /dev/md2 device?

Thanks,

R.

#1 lore raw
Quoted 2 lines · Robin Bowes
# mdadm --create /dev/md2 --level=1 --raid-devices=2 /dev/sdc1 missing
mdadm: error opening /dev/md2: No such file or directory

This is a side-effect of the way that the MD driver operates in a dynamic /dev environment. mdadm needs the /dev/mdX node to be available to be able to manipulate the array, but it doesn't exist until the array has been created. Catch-22.

At some point mdadm and the MD driver need a new communication method that uses a common device node for all arrays, but that won't happen soon.

In the meantime, you can manually create /dev/mdX nodes with mknod, just as you would have done before. Once the array is created, if you have it set to auto-start (using 0xfd partition types), it the device node will automatically appear when you boot your system. If you don't have it set to auto-start, you'll have to add the "mknod" command to your system startup scripts before trying to start the array directly.

#2 lore raw
Quoted 6 lines · Kevin P. Fleming
Quoted 2 lines · Robin Bowes
# mdadm --create /dev/md2 --level=1 --raid-devices=2 /dev/sdc1 missing
mdadm: error opening /dev/md2: No such file or directory

In the meantime, you can manually create /dev/mdX nodes with mknod, just as you would have done before. Once the array is created, if you have it set to auto-start (using 0xfd partition types), it the device node will automatically appear when you boot your system. If you don't have it set to auto-start, you'll have to add the "mknod" command to your system startup scripts before trying to start the array directly.

OK, they are set to auto-start.

I wasn't sure how to use mknod. So here's what I did:

[root@dude dev]# mknod --help
Usage: mknod [OPTION]... NAME TYPE [MAJOR MINOR]
Create the special file NAME of the given TYPE.

-Z, --context=CONTEXT set security context (quoted string)
Mandatory arguments to long options are mandatory for short options too.
-m, --mode=MODE set permission mode (as in chmod), not a=rw - umask
--help display this help and exit
--version output version information and exit

Both MAJOR and MINOR must be specified when TYPE is b, c, or u, and they must be omitted when TYPE is p. If MAJOR or MINOR begins with 0x or 0X, it is interpreted as hexadecimal; otherwise, if it begins with 0, as octal; otherwise, as decimal. TYPE may be:

  b      create a block (buffered) special file
  c, u   create a character (unbuffered) special file
  p      create a FIFO

Report bugs to <[email protected]>. [root@dude dev]# mknod /dev/md2 b
mknod: when creating special files, major and minor device numbers must be specified
Try `mknod --help' for more information. [root@dude dev]# ls /dev/md1
/dev/md1
[root@dude dev]# file /dev/md1
/dev/md1: block special (9/1)
[root@dude dev]# file /dev/md0
/dev/md0: block special (9/0)
[root@dude dev]# file /dev/md5
/dev/md5: block special (9/5)
[root@dude dev]# mknod /dev/md2 b 9 2
[root@dude dev]# ls /dev/md2
/dev/md2

Done!

Thanks,

R.

#3 lore raw
In reply to Robin Bowes
Quoted 8 lines · Robin Bowes
# mdadm --create /dev/md2 --level=1 --raid-devices=2 /dev/sdc1 missing
mdadm: error opening /dev/md2: No such file or directory

I've used "missing" since the other spare partition is on /dev/sdf which is being RMA'd at the moment - guess what make it is :)

The new FC3 system is running udev with which I'm not familiar.

How can I create the /dev/md2 device?

ah, udev, what a great pile of shit it is.

you could use the --auto= option of mdadm to have it create the device for you, the only issue with that is that mdadm will use the first free minor numbr it finds instead of using the minor implied by the device name. (i was planning on changing that behaviour sooner or later).

Signature · 6 lines
Luca Berra -- [email protected]
       Communication Media & Services S.r.l.
/"\
\ /     ASCII RIBBON CAMPAIGN
 X        AGAINST HTML MAIL
/ \