Skip to contentSkip to conversation

kernel development environment

DISCUSSION Miguel Angel Flores 12 participants 18 messages Dec 4, 2004 – Dec 16, 2004

lore
Share & tools
lore
#0 lore raw

Hi all,

Recently I'm interested on linux kernel development. I would like to write patches (and, of course, post them in this list ;). In fact, I could say that I have already a patch for the console frame buffer support for the 2.6 branch.

My actual development environment consists in a scratch vim editor, diff, patch and gcc. My question is: ¿What kind of tools use you, the kernel gurus, to write and debug code? ¿It's enough with vi and gcc?

Thank you in advance and excuse my poor english.

MaF

#1 lore raw

On Sat, 2004-12-04 18:52:58 +0100, Miguel Angel Flores <[email protected]> wrote in message <[email protected]>:

Quoted 2 lines

and gcc. My question is: ¿What kind of tools use you, the kernel gurus, to write and debug code? ¿It's enough with vi and gcc?

A compiler and a text editor is all you need, your combination is a perfectly well working combination.

MfG, JBG

Signature · 4 lines
Jan-Benedict Glaw       [email protected]    . +49-172-7608481             _ O _
"Eine Freie Meinung in  einem Freien Kopf    | Gegen Zensur | Gegen Krieg  _ _ O
 fuer einen Freien Staat voll Freier Bürger" | im Internet! |   im Irak!   O O O
ret = do_actions((curr | FREE_SPEECH) & ~(NEW_COPYRIGHT_LAW | DRM | TCPA));
#2 lore raw
In reply to Miguel Angel Flores
Quoted 4 lines · Miguel Angel Flores

My actual development environment consists in a scratch vim editor, diff, patch
and gcc. My question is: ¿What kind of tools use you, the kernel gurus, to write and debug code? ¿It's enough with vi and gcc?

At the very minimum you need to add grep to your tool set. It will save you a lot of flames :)

Alessandro
www.b-open-solutions.it

#3 lore raw
Quoted 4 lines · Alessandro Amici

At the very minimum you need to add grep to your tool set. It will save you a lot of flames :)

As I can see the kernel hacker tools are the standard GNU tools. I'm in the correct way ;)

Thank you.

#4 lore raw

Miguel

Quoted 6 lines · Miguel Angel Flores
Quoted 2 lines · Alessandro Amici

At the very minimum you need to add grep to your tool set. It will save you a lot of flames :)

As I can see the kernel hacker tools are the standard GNU tools. I'm in the correct way ;)

Well, I'm not exactly a kernel hacker even if I did some minor driver work in the past, so don't rate my advice too high :)

Anyhow, I lurk l-k regularly and most of the developing tools that appear in discussions among real kernel hackers appear to be the standard GNU tools.

I did personally try out some of the open source IDE like sourcenav and kdevelop, but the raw size of the kernel code pushed them to or beyond their limits. That was a couple of years ago things may have changed.

Other stuff that come to mind are: a decent mailer (Mozilla Mail should qualify :), a decent irc client, bk or if you prefer cvs. I saw ctags cited at times, but I didn't use it myself.

Hope this helps,
Alessandro
www.b-open-solutions.it

#5 lore raw
Quoted 2 lines · Alessandro Amici

a decent mailer (Mozilla Mail should
qualify :)

I hope you are kidding.

In case you did not get the joke, Mozilla Mail is one of the WORST mail clients for handling kernel patches. See the list archives.

Use a mailer that does the Right Thing by default like Evolution.

Lee

#6 lore raw
Quoted 2 lines · Lee Revell

In case you did not get the joke, Mozilla Mail is one of the WORST mail clients for handling kernel patches. See the list archives.

Mozilla works fine if you send patches as attachments.

Michal

#7 lore raw
Quoted 6 lines · Michal Schmidt
Quoted 2 lines · Lee Revell

In case you did not get the joke, Mozilla Mail is one of the WORST mail clients for handling kernel patches. See the list archives.

Mozilla works fine if you send patches as attachments.

I still say it's broken.

http://lkml.org/lkml/2004/10/22/488

Lee

#8 lore raw
Quoted 7 lines · Lee Revell
Quoted 5 lines · Michal Schmidt
Quoted 2 lines · Lee Revell

In case you did not get the joke, Mozilla Mail is one of the WORST mail clients for handling kernel patches. See the list archives.

Quoted 7 lines
Quoted 2 lines

Mozilla works fine if you send patches as attachments.

I still say it's broken.

http://lkml.org/lkml/2004/10/22/488

so don't use copy-paste. that idea is broken.

otoh, netscape/mozilla/thunderbird mail
all work fine (except that attachments are required, instead of being able to insert patches inline).

Signature · 1 line
~Randy
#9 lore raw
Quoted 7 lines · Randy.Dunlap
Quoted 3 lines · Lee Revell

I still say it's broken.

http://lkml.org/lkml/2004/10/22/488

so don't use copy-paste. that idea is broken.

diff foo bar | xclip works perfectly with my mailer and does not require a temporary file. There is no good reason for this not to work in mozilla. Therefore it's a bug.

Quoted 4 lines

otoh, netscape/mozilla/thunderbird mail
all work fine (except that attachments are required, instead of being able to insert patches inline).

I am aware that a workaround is available. Doesn't mean it's not a bug.

Lee

#10 lore raw
Quoted 2 lines · Lee Revell

diff foo bar | xclip works perfectly with my mailer and does not require a temporary file.

Pasting from xclip to Mozilla Thunderbird works for me IFF the selection is 4096 bytes or less. But it looks like a bug in xclip, not Mozilla. Try this:

$ (for i in `seq 1 4096`; do echo -n 'a'; done) | xclip
$ xclip -o
aaaaaaaaaaaa......aaa
$ (for i in `seq 1 4097`; do echo -n 'a'; done) | xclip
$ xclip -o
[hangs]

This is with SuSE 8.2 and xclip from a Debian package xclip_0.08-4_i386.deb .

Quoted 2 lines

There is no good reason for this not to work in mozilla. Therefore it's a bug.

Not a Mozilla bug.

Michal

#11 lore raw
Quoted 4 lines · Michal Schmidt
Quoted 2 lines

There is no good reason for this not to work in mozilla. Therefore it's a bug.

Not a Mozilla bug.

Interesting, I will see if I can confirm your results. Anyway this is wandering OT, let's just say you should make sure your mailer doesn't mangle patches.

Lee

#12 lore raw
In reply to Michal Schmidt
Quoted 12 lines · Michal Schmidt
Quoted 2 lines · Lee Revell

diff foo bar | xclip works perfectly with my mailer and does not require a temporary file.

Pasting from xclip to Mozilla Thunderbird works for me IFF the selection is 4096 bytes or less. But it looks like a bug in xclip, not Mozilla. Try this:

$ (for i in `seq 1 4096`; do echo -n 'a'; done) | xclip
$ xclip -o
aaaaaaaaaaaa......aaa
Quoted 5 lines
$ (for i in `seq 1 4097`; do echo -n 'a'; done) | xclip
$ xclip -o
[hangs]

This is with SuSE 8.2 and xclip from a Debian package xclip_0.08-4_i386.deb .

I've done some work on xclip in Debian so I thought to test it. It doesn't happen to me on my Debian testing with xclip 0.08-4

After 4k of transfers the clipboard protocol means sending multiple messages, I've did some fixes in that area a while ago and didn't hear of any problems in that area.

I'd be happy to hear of such problems, directly or in the Debian BTS.

Baruch

#13 lore raw
In reply to Randy.Dunlap
Quoted 16 lines · Randy.Dunlap
Quoted 14 lines · Lee Revell
Quoted 8 lines · Michal Schmidt
Quoted 2 lines · Lee Revell

In case you did not get the joke, Mozilla Mail is one of the WORST mail clients for handling kernel patches. See the list archives.

Mozilla works fine if you send patches as attachments.

I still say it's broken.

Quoted 9 lines
Quoted 1 line

http://lkml.org/lkml/2004/10/22/488

so don't use copy-paste. that idea is broken.

otoh, netscape/mozilla/thunderbird mail
all work fine (except that attachments are required, instead of being able to insert patches inline).

After inadvertently helping to discover the bug in Mozilla, I use the sendpatchset script written by Paul Jackson at:

http://www.speakeasy.org/~pj99/sgi/sendpatchset

That lets people's patch-collecting scripts work properly, since (apparently) most of the m choke on the MIME headers from attachments.

If you need to connect directly to your ISP, Paul sent me a fix I can forward.

#14 lore raw
In reply to Lee Revell
Quoted 7 lines · Lee Revell
Quoted 5 lines · Michal Schmidt
Quoted 2 lines · Lee Revell

In case you did not get the joke, Mozilla Mail is one of the WORST mail clients for handling kernel patches. See the list archives.

Quoted 7 lines
Quoted 2 lines

Mozilla works fine if you send patches as attachments.

I still say it's broken.

http://lkml.org/lkml/2004/10/22/488

The process of drag and drop converts tabs to blanks, among other evils. You are arguing about the best way to do the wrong thing, like rewriting a bubble sort in assembler. The correct tool is attach to preserve whatever is in the original.

Signature · 3 lines
bill davidsen <[email protected]>
  CTO TMR Associates, Inc
  Doing interesting things with small computers since 1979
#16 lore raw
In reply to Miguel Angel Flores
Quoted 4 lines · Miguel Angel Flores

My actual development environment consists in a scratch vim editor, diff, patch
and gcc. My question is: ¿What kind of tools use you, the kernel gurus, to write and debug code? ¿It's enough with vi and gcc?

Editor, compiler and at least two PC's, and occasionally gdbstubs

#17 lore raw
Quoted 7 lines · Alan Cox
Quoted 4 lines · Miguel Angel Flores

My actual development environment consists in a scratch vim editor, diff, patch
and gcc. My question is: ¿What kind of tools use you, the kernel gurus, to write and debug code? ¿It's enough with vi and gcc?

Editor, compiler and at least two PC's, and occasionally gdbstubs

although I do not consider myself a 'kernel guru' ...

cscope and ctags will help with code navigation QEMU and UML are good choices to do kernel testing and if necessary debugging ...

HTH,
Herbert

Quoted 5 lines

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/