network console
Has anybody attempted to implement console on network interface (with or without encryption, preferably with some form of authentication)? Either using TCP, UDP, Ethernet datagrams, or whatever. Possibly with LILO support so that LILO prompt can be accessed through it too (OK, LILO support is probably *way* too much to ask for, but maybe some other more complex boot loader?).
I know the security implications of using such an console, but for my home environment, if something like that existed it would be quite handy. I have a box with no keyboard/monitor, and to use serial console I'd have to route loooooong serial cable through half of my house, and I already have network cable in place (took me half of the day to route that one, and another half of the day to wash myself from all the dirt and dust hidden in most obscure places that light of the day never touches).
If such a beast exists, what would be required on the client side? Linux-only client, or is there Windows client too?
TIA,
Alex
Quoted 1 line · Aleksandar Milivojevic
Has anybody attempted to implement console on network interface (with or
please read Documentation/networking/netconsole.txt.
Quoted 2 lines
If such a beast exists, what would be required on the client side? Linux-only client, or is there Windows client too?
client? well, the machine with netconsole-enabled kernel would be the "client", the machine with the syslog daemon would be the "server".
Signature · 3 lines
BOFH excuse #202: kernel panic: write-only-memory (/dev/wom0) capacity exceeded.
Quoted 6 lines · Christian Kujau
Quoted 1 line · Aleksandar Milivojevic
Has anybody attempted to implement console on network interface (with or
please read
Documentation/networking/netconsole.txt.
Not exactly what I had in mind, but having kernel printk messages sent to remote host will be helpfull too. What I had in mind was actually having two-way fully functional network console (something I could also use to log onto the machine, say if I screw up firewall settings and lock myself out).
Signature · 3 lines
Aleksandar Milivojevic <[email protected]> Pollard Banknote Limited Systems Administrator 1499 Buffalo Place Tel: (204) 474-2323 ext 276 Winnipeg, MB R3T 1L7
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Quoted 6 lines · Aleksandar Milivojevic
Not exactly what I had in mind, but having kernel printk messages sent to remote host will be helpfull too. What I had in mind was actually having two-way fully functional network console (something I could also use to log onto the machine, say if I screw up firewall settings and lock myself out).
that would require an additional and "secure-by-default" device, otherwise your firewall would be superfluous.
- - serial console
- - setup just another ethX next to your other ethernetdevices and make it a point-to-point connection to your machine. isdn/ppp dial-in with authentication will also do here.
i hope i got your point....
- --
BOFH excuse #441:
Hash table has woodworm
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.5 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org
iD8DBQFBskB1+A7rjkF8z0wRAhPhAKCtsfEDYemUeFpsWgalb1jCZfBvEwCgoHW0 BYGc4vk3xI3bVLnagmc1B7U=
=vvN3
-----END PGP SIGNATURE-----