Skip to contentSkip to conversation

2.6.10-rc3-bk4 does not compile

DISCUSSION Zoltan NAGY 2 participants 3 messages Dec 9, 2004

lore
Share & tools
lore
#0 lore raw

It fails with the following error messages:

CC drivers/block/rd.o
drivers/block/rd.c:67: error: CONFIG_BLK_DEV_RAM_COUNT' undeclared here (not in a function) drivers/block/rd.c:68: error: CONFIG_BLK_DEV_RAM_COUNT' undeclared here (not in a function) drivers/block/rd.c:69: error: CONFIG_BLK_DEV_RAM_COUNT' undeclared here (not in a function) drivers/block/rd.c: In function rd_cleanup':
drivers/block/rd.c:403: error: `CONFIG_BLK_DEV_RAM_COUNT' undeclared (first use in this function) drivers/block/rd.c:403: error: (Each undeclared identifier is reported only once drivers/block/rd.c:403: error: for each function it appears in.) drivers/block/rd.c: In function `rd_init':
drivers/block/rd.c:433: error: `CONFIG_BLK_DEV_RAM_COUNT' undeclared (first use in this function) drivers/block/rd.c: At top level:
drivers/block/rd.c:67: error: storage size of rd_disks' isn't known drivers/block/rd.c:68: error: storage size of rd_bdev' isn't known drivers/block/rd.c:69: error: storage size of rd_queue' isn't known drivers/block/rd.c:67: warning: rd_disks' defined but not used drivers/block/rd.c:68: warning: rd_bdev' defined but not used drivers/block/rd.c:69: warning: rd_queue' defined but not used
make[2]: *** [drivers/block/rd.o] Error 1
make[1]: *** [drivers/block] Error 2
make: *** [drivers] Error 2

Regards,

Zoltan NAGY,
Software Engineer

#1 lore raw
Quoted 14 lines · Zoltan NAGY

It fails with the following error messages:

CC drivers/block/rd.o
drivers/block/rd.c:67: error: CONFIG_BLK_DEV_RAM_COUNT' undeclared here (not in a function) drivers/block/rd.c:68: error: CONFIG_BLK_DEV_RAM_COUNT' undeclared here (not in a function) drivers/block/rd.c:69: error: CONFIG_BLK_DEV_RAM_COUNT' undeclared here (not in a function) drivers/block/rd.c: In function rd_cleanup':
drivers/block/rd.c:403: error: `CONFIG_BLK_DEV_RAM_COUNT' undeclared (first use in this function) drivers/block/rd.c:403: error: (Each undeclared identifier is reported only once drivers/block/rd.c:403: error: for each function it appears in.) drivers/block/rd.c: In function `rd_init':
drivers/block/rd.c:433: error: `CONFIG_BLK_DEV_RAM_COUNT' undeclared (first use in this function) drivers/block/rd.c: At top level:
drivers/block/rd.c:67: error: storage size of `rd_disks' isn't known

Quoted 8 lines

drivers/block/rd.c:68: error: storage size of rd_bdev' isn't known drivers/block/rd.c:69: error: storage size of rd_queue' isn't known drivers/block/rd.c:67: warning: rd_disks' defined but not used drivers/block/rd.c:68: warning: rd_bdev' defined but not used drivers/block/rd.c:69: warning: `rd_queue' defined but not used make[2]: *** [drivers/block/rd.o] Error 1
make[1]: *** [drivers/block] Error 2
make: *** [drivers] Error 2

That's weird. rd.c #includes <config.h>, so CONFIG_BLK_DEV_RAM_COUNT should be there. and it builds OK for me, as module or in-kernel.

Please check that you have rc3-bk4 applied (patched) correctly and then send your .config file.

Signature · 1 line
~Randy
#2 lore raw
Quoted 26 lines · Randy.Dunlap
Quoted 14 lines · Zoltan NAGY

It fails with the following error messages:

CC drivers/block/rd.o
drivers/block/rd.c:67: error: CONFIG_BLK_DEV_RAM_COUNT' undeclared here (not in a function) drivers/block/rd.c:68: error: CONFIG_BLK_DEV_RAM_COUNT' undeclared here (not in a function) drivers/block/rd.c:69: error: CONFIG_BLK_DEV_RAM_COUNT' undeclared here (not in a function) drivers/block/rd.c: In function rd_cleanup':
drivers/block/rd.c:403: error: `CONFIG_BLK_DEV_RAM_COUNT' undeclared (first use in this function) drivers/block/rd.c:403: error: (Each undeclared identifier is reported only once drivers/block/rd.c:403: error: for each function it appears in.) drivers/block/rd.c: In function `rd_init':
drivers/block/rd.c:433: error: `CONFIG_BLK_DEV_RAM_COUNT' undeclared (first use in this function) drivers/block/rd.c: At top level:
drivers/block/rd.c:67: error: storage size of `rd_disks' isn't known

Quoted 8 lines

drivers/block/rd.c:68: error: storage size of rd_bdev' isn't known drivers/block/rd.c:69: error: storage size of rd_queue' isn't known drivers/block/rd.c:67: warning: rd_disks' defined but not used drivers/block/rd.c:68: warning: rd_bdev' defined but not used drivers/block/rd.c:69: warning: `rd_queue' defined but not used make[2]: *** [drivers/block/rd.o] Error 1
make[1]: *** [drivers/block] Error 2
make: *** [drivers] Error 2

Quoted 6 lines

That's weird. rd.c #includes <config.h>, so CONFIG_BLK_DEV_RAM_COUNT should be there. and it builds OK for me, as module or in-kernel.

Please check that you have rc3-bk4 applied (patched) correctly and then send your .config file.

Ok, found it. I've tried to build that kernel for UML, and UML's defconfig does not contain CONFIG_BLK_DEV_RAM_COUNT... Gerd Knorr posted a patch[1], and it should really go into 2.6.10, or UML wont build.

[1]: http://www.uwsg.iu.edu/hypermail/linux/kernel/0412.0/1429.html

Regards,

Zoltan NAGY,
Software Engineer