Skip to contentSkip to conversation

2.6.10-rc3 vs clock

DISCUSSION Sid Boyce 2 participants 3 messages Dec 13, 2004 – Dec 14, 2004

lore
Share & tools
lore

Sid Boyce

author
#0 lore raw

I'm seeing uptime 11:26pm up 1 day 13:30 and my clock is around 190 secs fast, I don't know if this happened only at 2.6.10-rc3, but that's when I noticed it on this XP3000+. On the x86_64 laptop also with 2.6.10-rc3, it's bang on time in uptime 5 days 2:11. Regards
Sid.

Signature · 2 lines
Sid Boyce .... Hamradio G3VBV and keen Flyer
=====LINUX ONLY USED HERE=====
#1 lore raw
Quoted 6 lines · Sid Boyce

I'm seeing uptime 11:26pm up 1 day 13:30 and my clock is around 190 secs fast, I don't know if this happened only at 2.6.10-rc3, but that's when I noticed it on this XP3000+. On the x86_64 laptop also with 2.6.10-rc3, it's bang on time in uptime 5 days 2:11. Regards
Sid.

I've been playng with the tickadj command, and am currently set at 9926, default is 10,000. And I'm keeping pretty good time now. Running ntpdate in slew the clock mode, once per hour, I'm logging this now:

Dec 13 12:35:03 coyote ntpdate[26529]: adjust time server
140.142.16.34 offset 0.043227 sec
Dec 13 13:35:01 coyote ntpdate[27572]: adjust time server
18.145.0.30 offset 0.248119 sec
Dec 13 14:35:05 coyote ntpdate[28624]: adjust time server
204.123.2.72 offset 0.156707 sec
Dec 13 15:35:03 coyote ntpdate[29486]: adjust time server
198.30.92.2 offset 0.245309 sec
Dec 13 16:35:04 coyote ntpdate[30400]: adjust time server
164.67.62.194 offset 0.105258 sec
Dec 13 17:35:01 coyote ntpdate[31320]: adjust time server
130.207.244.240 offset 0.036849 sec
Dec 13 18:35:01 coyote ntpdate[32229]: adjust time server
18.145.0.30 offset 0.254626 sec
Dec 13 19:35:10 coyote ntpdate[741]: adjust time server
198.30.92.2 offset 0.276145 sec
Dec 13 20:35:02 coyote ntpdate[1858]: adjust time server

128.252.19.1 offset 0.151181 sec

So while its not perfect, its adequate.

As to whats doing it, I have NDI.

Signature · 8 lines
Cheers, Gene
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
99.30% setiathome rank, not too shabby for a WV hillbilly
Yahoo.com attorneys please note, additions to this message
by Gene Heskett are:
Copyright 2004 by Maurice Eugene Heskett, all rights reserved.
author
#2 lore raw
Quoted 31 lines · Gene Heskett
Quoted 6 lines · Sid Boyce

I'm seeing uptime 11:26pm up 1 day 13:30 and my clock is around 190 secs fast, I don't know if this happened only at 2.6.10-rc3, but that's when I noticed it on this XP3000+. On the x86_64 laptop also with 2.6.10-rc3, it's bang on time in uptime 5 days 2:11. Regards
Sid.

I've been playng with the tickadj command, and am currently set at 9926, default is 10,000. And I'm keeping pretty good time now. Running ntpdate in slew the clock mode, once per hour, I'm logging this now:

Dec 13 12:35:03 coyote ntpdate[26529]: adjust time server
140.142.16.34 offset 0.043227 sec
Dec 13 13:35:01 coyote ntpdate[27572]: adjust time server
18.145.0.30 offset 0.248119 sec
Dec 13 14:35:05 coyote ntpdate[28624]: adjust time server
204.123.2.72 offset 0.156707 sec
Dec 13 15:35:03 coyote ntpdate[29486]: adjust time server
198.30.92.2 offset 0.245309 sec
Dec 13 16:35:04 coyote ntpdate[30400]: adjust time server
164.67.62.194 offset 0.105258 sec
Dec 13 17:35:01 coyote ntpdate[31320]: adjust time server
130.207.244.240 offset 0.036849 sec
Dec 13 18:35:01 coyote ntpdate[32229]: adjust time server
18.145.0.30 offset 0.254626 sec
Dec 13 19:35:10 coyote ntpdate[741]: adjust time server
198.30.92.2 offset 0.276145 sec
Dec 13 20:35:02 coyote ntpdate[1858]: adjust time server
Quoted 6 lines

128.252.19.1 offset 0.151181 sec

So while its not perfect, its adequate.

As to whats doing it, I have NDI.

Thanks, I set it to 9942 and checking with ptktime and it's looking good, before it was drifting by 3 seconds by this time - with 9926 it was losing slightly, 2 secs in about 5 minutes. On the laptops and the Mandrake box that are rock solid it is set at 10,000, the P-II/333 laptop is using the SuSE 9.2 kernel and the others are on 2.6.10-rc3. Regards
Sid.

Signature · 2 lines
Sid Boyce .... Hamradio G3VBV and keen Flyer
=====LINUX ONLY USED HERE=====