setting input and output levels
OK, I've got a rather basic question, but I can't seem to find the answer...
How do I set the transmit and receive analog levels on the sound card to use it as a sound modem or is it possible?
I'm using a sound blaster sound card it says 'SB 4.05 detected OK' in dmsg. I compiled sound modem support into the kernel (I think) and I'm using soundmodemconfig to set it up. I can copy the traffic on my radio through the sound card OK, although I have the output from the radio going into the 'mic' input on the sound card instead of the line input. I've even got the PTT working (with some help from people on this list, thanks).
Now when I try to transmit the radio is keyed but I don't think I'm transmitting anything and I got thinking, how can I adjust the transmit, or for that mater, the receive analog levels???
Have I missed something really basic, or am I just not understanding the way it works?
Signature · 3 lines
No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.296 / Virus Database: 265.6.0 - Release Date: 17/12/2004
Quoted 5 lines · On Sat, 18 Dec 2004 14:35:03 -0800 Gordon Croft wrote:
OK, I've got a rather basic question, but I can't seem to find the answer...
How do I set the transmit and receive analog levels on the sound card to use it as a sound modem or is it possible?
I is possible, and many are doing this (me included).
Quoted 3 lines
I'm using a sound blaster sound card it says 'SB 4.05 detected OK' in dmsg. I compiled sound modem support into the kernel (I think) and I'm using soundmodemconfig to set it up.
No. The soundmodemconfig utility is the configuration tool for userspace soundmodem, not the kernel soundmodem module.
I can copy the traffic on my
Quoted 4 lines
radio through the sound card OK, although I have the output from the radio going into the 'mic' input on the sound card instead of the line input. I've even got the PTT working (with some help from people on this list, thanks).
The line input should perform better. You need to select the recording source from a mixer app.
Quoted 3 lines
Now when I try to transmit the radio is keyed but I don't think I'm transmitting anything and I got thinking, how can I adjust the transmit, or for that mater, the receive analog levels???
For adjusting the receive level, use the soundmodemconfig tool, which has a calibration feature. Then adjust for best reception of all other stations.
I adjust tx level just by ear. Try to make it sound similar to other reference station (a well working tnc or something). Then if needed adjust for others to have best reception of you.