SCC Driver compilation error

DISCUSSION IZ4EFN Alessio 2 participants 2 messages Dec 25, 2004 – Dec 26, 2004

lore

Share & tools

lore

IZ4EFN Alessio

author

2004-12-25 13:27 UTC #0 lore raw

Hello guys,

Marry Christmast to everyone!!

I'm, in these days of holiday, trying to setup a couple of old cards based on Z8530.

These are S5PCC design (board rebuild by I2REO), two Z8530 with 2 modems each.

While compiling the usual driver i get the following error:

root@Slack_ARIMO:~/z8530drv-2.4# make dep
gcc -O2 -m486 -Wall -Wstrict-prototypes -DCONFIG_SCC_STANDALONE -M sccstat.c sccinit.c sccparam.c >.depend
gcc -O2 -m486 -Wall -Wstrict-prototypes -DCONFIG_SCC_STANDALONE -c -pipe -D__KERNEL__ -DMODULE -DMODVERSIONS -fomit-frame-pointer -DCONFIG_SCC_DEV -DCONFIG_SCC_TTY -I/usr/src/linux/include -M scc.c >>.depend
scc.c:156:20: warning: extra tokens at end of #undef directive
In file included from scc.c:189:
/usr/src/linux/include/linux/malloc.h:4:2: warning: #warning linux/malloc.h is deprecated, use linux/slab.h instead.
scc.c:3153:46: macro "dev_kfree_skb" passed 2 arguments, but takes just 1
scc.c:3164:46: macro "dev_kfree_skb" passed 2 arguments, but takes just 1
scc.c:3171:38: macro "dev_kfree_skb" passed 2 arguments, but takes just 1
make: *** [dep] Error 1
root@Slack_ARIMO:~/z8530drv-2.4#

and the make is replying this:

root@Slack_ARIMO:~/z8530drv-2.4# make
install -g root -o root -m 0755 -s sccstat /sbin/sccstat
install -g root -o root -m 0700 -s sccinit /sbin/sccinit
install -g root -o root -m 0700 -s sccparam /sbin/sccparam
install -g root -o root -m 0644 z8530drv.conf /etc/z8530drv.conf.ex
for d in 0 1 2 3 4 5 6 7 ; do \
       rm -f /dev/scc$d                ;\
       mknod /dev/scc$d c 34 $d        ;\
done
root@Slack_ARIMO:~/z8530drv-2.4#

which seems to be fine.,

Where do you think the matter is?

Thanks for help, Alessio IZ4EFN.

[email protected]

2004-12-26 07:41 UTC #1 lore raw

Hello Alessio,

Why not use the kernel's source ?
If you include them in the kernel, i think no problems should appear.

Best regards,

ron

Quoted 62 lines

Hello guys,
Marry Christmast to everyone!!
I'm, in these days of holiday, trying to setup a couple of old cards based on Z8530.
These are S5PCC design (board rebuild by I2REO), two Z8530 with 2 modems each.
While compiling the usual driver i get the following error:
root@Slack_ARIMO:~/z8530drv-2.4# make dep
gcc -O2 -m486 -Wall -Wstrict-prototypes -DCONFIG_SCC_STANDALONE -M
sccstat.c sccinit.c sccparam.c >.depend
gcc -O2 -m486 -Wall -Wstrict-prototypes -DCONFIG_SCC_STANDALONE -c -pipe
(quoted diff) +0 -2
-D__KERNEL__ -DMODULE -DMODVERSIONS -fomit-frame-pointer
-DCONFIG_SCC_DEV -DCONFIG_SCC_TTY -I/usr/src/linux/include -M scc.c
 >>.depend
scc.c:156:20: warning: extra tokens at end of #undef directive In file included from scc.c:189:
/usr/src/linux/include/linux/malloc.h:4:2: warning: #warning linux/malloc.h is deprecated, use linux/slab.h instead. scc.c:3153:46: macro "dev_kfree_skb" passed 2 arguments, but takes just 1 scc.c:3164:46: macro "dev_kfree_skb" passed 2 arguments, but takes just 1 scc.c:3171:38: macro "dev_kfree_skb" passed 2 arguments, but takes just 1
make: *** [dep] Error 1
root@Slack_ARIMO:~/z8530drv-2.4#
and the make is replying this:
root@Slack_ARIMO:~/z8530drv-2.4# make
install -g root -o root -m 0755 -s sccstat /sbin/sccstat
install -g root -o root -m 0700 -s sccinit /sbin/sccinit
install -g root -o root -m 0700 -s sccparam /sbin/sccparam
install -g root -o root -m 0644 z8530drv.conf /etc/z8530drv.conf.ex
for d in 0 1 2 3 4 5 6 7 ; do \
        rm -f /dev/scc$d                ;\
        mknod /dev/scc$d c 34 $d        ;\
done
root@Slack_ARIMO:~/z8530drv-2.4#
which seems to be fine.,
Where do you think the matter is?
Thanks for help, Alessio IZ4EFN.
-
To unsubscribe from this list: send the line "unsubscribe linux-hams" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html