2.6.10 resuming laptop from suspension f*cks usb subsystem
Apart from the timer drift thingie, 2.6.10 brought some new features like usb devices (ramdomly) not working after resuming from suspend mode.
In 2.6.9 usb worked well, resuming from suspend just throws a bunch (near 20) messages like:
drivers/usb/input/hid-core.c: input irq status -84 received
(getting form /var/log/syslog, just don't have time to switch back to 2.6.9 and fiddle with it again). After those messages, the usb subsystem comes stable again and worked like a charm.
In 2.6.10, resuming from suspend mode just (randomly) crashes the USB subsystem, and I get the same messages (not sure about the whole message but the "-84" part really is there) over and over again until I reboot.
Quoted 3 lines · Miguelanxo Otero Salgueiro
Apart from the timer drift thingie, 2.6.10 brought some new features like usb devices (ramdomly) not working after resuming from suspend mode.
Same problem here.
For me, the work around was to remove the uhci-hcd before suspending and inserting it after resuming.
Hi!
Quoted 8 lines
Apart from the timer drift thingie, 2.6.10 brought some new features like usb devices (ramdomly) not working after resuming from suspend mode.
In 2.6.9 usb worked well, resuming from suspend just throws a bunch (near 20) messages like:
drivers/usb/input/hid-core.c: input irq status -84 received
Quoted 7 lines
(getting form
/var/log/syslog, just don't have time to switch back to 2.6.9 and fiddle with it again). After those messages, the usb subsystem comes stable again and worked like a charm.In 2.6.10, resuming from suspend mode just (randomly) crashes the USB subsystem, and I get the same messages (not sure about the whole message but the "-84" part really is there) over and over again until I reboot.
Does it still happen with noapic? 2.6.10 has some interrupt related problems with APIC...
Pavel
Signature · 2 lines
People were complaining that M$ turns users into beta-testers... ...jr ghea gurz vagb qrirybcref, naq gurl frrz gb yvxr vg gung jnl!
Quoted 11 lines
Quoted 4 lines
In 2.6.10, resuming from suspend mode just (randomly) crashes the USB subsystem, and I get the same messages (not sure about the whole message but the "-84" part really is there) over and over again until I reboot.
Does it still happen with noapic? 2.6.10 has some interrupt related problems with APIC...
Pavel
I have just rebooted 2.6.10 with this LILO command line
LILO Boot: Linux-2.6.10 noapic
and if that disables APIC, then I've got the same problem. After suspending the laptop two times, I get the same lines (described below) and the usb system goes nuts. After removing & inserting uhci_hcd everything works fine again.
The lines are (endless loop):drivers/usb/input/hid-core.c: input irq status -84 received
Hi!
Quoted 13 lines
Quoted 8 lines
Quoted 5 lines
In 2.6.10, resuming from suspend mode just (randomly) crashes the USB subsystem, and I get the same messages (not sure about the whole message but the "-84" part really is there) over and over again until I reboot.
Does it still happen with noapic? 2.6.10 has some interrupt related problems with APIC...
I have just rebooted 2.6.10 with this LILO command line
LILO Boot: Linux-2.6.10 noapic
Quoted 8 lines
and if that disables APIC, then I've got the same problem. After suspending the laptop
two times, I get the same lines (described below) and the usb system goes nuts. After
removing & insertinguhci_hcdeverything works fine again.The lines are (endless loop):
drivers/usb/input/hid-core.c: input irq status -84 received
I guess you need to ask on usb lists. If removing/inserting uhci_hcd helps, it is likely that uhci_hcd needs to do a bit more in its suspend/resume callbacks.
Pavel
Signature · 2 lines
People were complaining that M$ turns users into beta-testers... ...jr ghea gurz vagb qrirybcref, naq gurl frrz gb yvxr vg gung jnl!