Skip to contentSkip to conversation

ACPI gives error at boot

DISCUSSION Necati DEMiR 1 participant 2 messages Jan 5, 2005 – Jan 6, 2005 1 message not in the archive ACPI

lore
Share & tools
lore

Necati DEMiR

author
#0 lore raw

hi,
i have problem with ACPI.
it gives error at boot.
i am sending some information.

#dmesg
.
.
.
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel i850 Chipset.
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: AGP aperture is 64M @ 0xf8000000
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.MDET]
(Node cfb56400), AE_AML_REGION_LIMIT
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0._CRS]
(Node cfb56500), AE_AML_REGION_LIMIT
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0._CRS]
(Node cfb56500), AE_AML_REGION_LIMIT
shpchp: acpi_shpchprm:\_SB_.PCI0 _CRS fail=0x300b
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _CRS fail=0x300b
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.MDET]
(Node cfb56400), AE_AML_REGION_LIMIT
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0._CRS]
(Node cfb56500), AE_AML_REGION_LIMIT
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0._CRS]
(Node cfb56500), AE_AML_REGION_LIMIT
pciehp: acpi_pciehprm:\_SB_.PCI0 _CRS fail=0x300b
pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _CRS fail=0x300b
pciehp: PCI Express Hot Plug Controller Driver version: 0.4 .
.
.

# cat /proc/interrupts
          CPU0
 0:    4954673    IO-APIC-edge  timer
 1:       1829    IO-APIC-edge  i8042
 7:          0    IO-APIC-edge  parport0
 8:          1    IO-APIC-edge  rtc
 9:          0   IO-APIC-level  acpi
12:     136866    IO-APIC-edge  i8042
14:      66145    IO-APIC-edge  ide0
169:          0   IO-APIC-level  uhci_hcd
177:       4553   IO-APIC-level  Intel 82801BA-ICH2, saa7130[0]
185:         24   IO-APIC-level  uhci_hcd
201:      52515   IO-APIC-level  eth0
NMI:          0
LOC:    4954694
ERR:          0
MIS:          0

#lspci -vv
0000:00:00.0 Host bridge: Intel Corp. 82850 850 (Tehama) Chipset Host Bridge (MCH) (rev 04)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-

       Latency: 0
       Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
       Capabilities: [a0] AGP version 2.0
               Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- 
HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
               Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW-

Rate=<none>

0000:00:01.0 PCI bridge: Intel Corp. 82850 850 (Tehama) Chipset AGP Bridge (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Memory behind bridge: fc900000-fe9fffff
Prefetchable memory behind bridge: e4600000-f46fffff
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-

0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fea00000-feafffff
Prefetchable memory behind bridge: f4700000-f47fffff
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-

0000:00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 04)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0

0000:00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 04) (prog-if 80 [Master])
Subsystem: Intel Corp.: Unknown device 4d44
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 4: I/O ports at ffa0 [size=16]

0000:00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev 04) (prog-if 00 [UHCI])
Subsystem: Intel Corp.: Unknown device 4d44
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 169
Region 4: I/O ports at ef40 [size=32]

0000:00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 04)
Subsystem: Intel Corp.: Unknown device 4d44
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 177
Region 4: I/O ports at efa0 [size=16]

0000:00:1f.4 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #2) (rev 04) (prog-if 00 [UHCI])
Subsystem: Intel Corp.: Unknown device 4d44
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 185
Region 4: I/O ports at ef80 [size=32]

0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801BA/BAM AC'97 Audio (rev 04)
Subsystem: Intel Corp.: Unknown device 4d44
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

       Latency: 0
       Interrupt: pin B routed to IRQ 177
       Region 0: I/O ports at e800 [size=256]
       Region 1: I/O ports at ef00 [size=64]

0000:01:00.0 VGA compatible controller: nVidia Corporation NV11DDR [GeForce2 MX 100 DDR/200 DDR] (rev b2) (prog-if 00 [VGA])
Subsystem: CardExpert Technology: Unknown device 0001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

       Latency: 32 (1250ns min, 250ns max)
       Interrupt: pin A routed to IRQ 193
       Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
       Region 1: Memory at e8000000 (32-bit, prefetchable) [size=128M]
       Expansion ROM at fe9f0000 [disabled] [size=64K]
       Capabilities: [60] Power Management version 2
               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA

PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64-
HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4

               Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW-

Rate=<none>

0000:02:0a.0 Ethernet controller: Davicom Semiconductor, Inc. 21x4x DEC-Tulip compatible 10/100 Ethernet (rev 40)
Subsystem: Unknown device 3030:5032
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

       Latency: 32 (5000ns min, 10000ns max)
       Interrupt: pin A routed to IRQ 201
       Region 0: I/O ports at d800 [size=256]
       Region 1: Memory at feaffc00 (32-bit, non-prefetchable) [size=256]
       Expansion ROM at fea80000 [disabled] [size=256K]
       Capabilities: [50] Power Management version 2
               Flags: PMEClk- DSI- D1- D2+ AuxCurrent=220mA

PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:02:0c.0 Multimedia controller: Philips Semiconductors SAA7130 Video Broadcast Decoder (rev 01)
Subsystem: Philips Semiconductors: Unknown device 0000
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (3750ns min, 9500ns max)
Interrupt: pin A routed to IRQ 177
Region 0: Memory at feaff800 (32-bit, non-prefetchable) [size=1K]
Capabilities: [40] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

Signature · 13 lines
------------------------------------------------
Necati DEMiR
ndemir-8b7qcxwNidXiQSDH/[email protected]
http://demir.web.tr
My Public Key => http://demir.web.tr/ndemir.asc
-------------------------------------------------



-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt

A message that is not in the archive (sent off-list or not yet received): 41DC2CC0.4070800-8b7qcxwNidXiQSDH/[email protected]

author
#2 lore raw
Quoted 206 lines · Necati DEMiR

hi,
i have problem with ACPI.
it gives error at boot.
i am sending some information.

#dmesg
.
.
.
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel i850 Chipset.
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: AGP aperture is 64M @ 0xf8000000
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.MDET]
(Node cfb56400), AE_AML_REGION_LIMIT
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0._CRS]
(Node cfb56500), AE_AML_REGION_LIMIT
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0._CRS]
(Node cfb56500), AE_AML_REGION_LIMIT
shpchp: acpi_shpchprm:\_SB_.PCI0 _CRS fail=0x300b
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _CRS fail=0x300b
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.MDET]
(Node cfb56400), AE_AML_REGION_LIMIT
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0._CRS]
(Node cfb56500), AE_AML_REGION_LIMIT
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0._CRS]
(Node cfb56500), AE_AML_REGION_LIMIT
pciehp: acpi_pciehprm:\_SB_.PCI0 _CRS fail=0x300b
pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _CRS fail=0x300b
pciehp: PCI Express Hot Plug Controller Driver version: 0.4 .
.
.

# cat /proc/interrupts
          CPU0
 0:    4954673    IO-APIC-edge  timer
 1:       1829    IO-APIC-edge  i8042
 7:          0    IO-APIC-edge  parport0
 8:          1    IO-APIC-edge  rtc
 9:          0   IO-APIC-level  acpi
12:     136866    IO-APIC-edge  i8042
14:      66145    IO-APIC-edge  ide0
169:          0   IO-APIC-level  uhci_hcd
177:       4553   IO-APIC-level  Intel 82801BA-ICH2, saa7130[0]
185:         24   IO-APIC-level  uhci_hcd
201:      52515   IO-APIC-level  eth0
NMI:          0
LOC:    4954694
ERR:          0
MIS:          0

#lspci -vv
0000:00:00.0 Host bridge: Intel Corp. 82850 850 (Tehama) Chipset Host Bridge (MCH) (rev 04)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-

       Latency: 0
       Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
       Capabilities: [a0] AGP version 2.0
               Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- 
HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
               Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit-

FW- Rate=<none>

0000:00:01.0 PCI bridge: Intel Corp. 82850 850 (Tehama) Chipset AGP Bridge (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Memory behind bridge: fc900000-fe9fffff
Prefetchable memory behind bridge: e4600000-f46fffff
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-

0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fea00000-feafffff
Prefetchable memory behind bridge: f4700000-f47fffff
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-

0000:00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 04)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium

Quoted 1 line

TAbort- <TAbort- <MAbort- >SERR- <PERR-

Latency: 0

0000:00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 04) (prog-if 80 [Master])
Subsystem: Intel Corp.: Unknown device 4d44
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium

Quoted 1 line

TAbort- <TAbort- <MAbort- >SERR- <PERR-

Latency: 0
Region 4: I/O ports at ffa0 [size=16]

0000:00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev 04) (prog-if 00 [UHCI])
Subsystem: Intel Corp.: Unknown device 4d44
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium

Quoted 1 line

TAbort- <TAbort- <MAbort- >SERR- <PERR-

Latency: 0
Interrupt: pin D routed to IRQ 169
Region 4: I/O ports at ef40 [size=32]

0000:00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 04)
Subsystem: Intel Corp.: Unknown device 4d44
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium

Quoted 1 line

TAbort- <TAbort- <MAbort- >SERR- <PERR-

Interrupt: pin B routed to IRQ 177
Region 4: I/O ports at efa0 [size=16]

0000:00:1f.4 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #2) (rev 04) (prog-if 00 [UHCI])
Subsystem: Intel Corp.: Unknown device 4d44
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium

Quoted 1 line

TAbort- <TAbort- <MAbort- >SERR- <PERR-

Latency: 0
Interrupt: pin C routed to IRQ 185
Region 4: I/O ports at ef80 [size=32]

0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801BA/BAM AC'97 Audio (rev 04)
Subsystem: Intel Corp.: Unknown device 4d44
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium

Quoted 1 line

TAbort- <TAbort- <MAbort- >SERR- <PERR-

       Latency: 0
       Interrupt: pin B routed to IRQ 177
       Region 0: I/O ports at e800 [size=256]
       Region 1: I/O ports at ef00 [size=64]

0000:01:00.0 VGA compatible controller: nVidia Corporation NV11DDR [GeForce2 MX 100 DDR/200 DDR] (rev b2) (prog-if 00 [VGA])
Subsystem: CardExpert Technology: Unknown device 0001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium

Quoted 1 line

TAbort- <TAbort- <MAbort- >SERR- <PERR-

       Latency: 32 (1250ns min, 250ns max)
       Interrupt: pin A routed to IRQ 193
       Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
       Region 1: Memory at e8000000 (32-bit, prefetchable) [size=128M]
       Expansion ROM at fe9f0000 [disabled] [size=64K]
       Capabilities: [60] Power Management version 2
               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA

PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64-
HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4

               Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit-

FW- Rate=<none>

0000:02:0a.0 Ethernet controller: Davicom Semiconductor, Inc. 21x4x DEC-Tulip compatible 10/100 Ethernet (rev 40)
Subsystem: Unknown device 3030:5032
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium

Quoted 1 line

TAbort- <TAbort- <MAbort- >SERR- <PERR-

       Latency: 32 (5000ns min, 10000ns max)
       Interrupt: pin A routed to IRQ 201
       Region 0: I/O ports at d800 [size=256]
       Region 1: Memory at feaffc00 (32-bit, non-prefetchable) [size=256]
       Expansion ROM at fea80000 [disabled] [size=256K]
       Capabilities: [50] Power Management version 2
               Flags: PMEClk- DSI- D1- D2+ AuxCurrent=220mA

PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:02:0c.0 Multimedia controller: Philips Semiconductors SAA7130 Video Broadcast Decoder (rev 01)
Subsystem: Philips Semiconductors: Unknown device 0000
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium

Quoted 1 line

TAbort- <TAbort- <MAbort- >SERR- <PERR-

Latency: 32 (3750ns min, 9500ns max)
Interrupt: pin A routed to IRQ 177
Region 0: Memory at feaff800 (32-bit, non-prefetchable) [size=1K]
Capabilities: [40] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

Signature · 13 lines
------------------------------------------------
Necati DEMiR
ndemir-8b7qcxwNidXiQSDH/[email protected]
http://demir.web.tr
My Public Key => http://demir.web.tr/ndemir.asc
-------------------------------------------------



-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt