Skip to contentSkip to conversation

Questions about the CMD640 and RZ1000 bugfix support options

DISCUSSION Christoph Anton Mitterer 4 participants 10 messages Dec 31, 2004 – Jan 7, 2005

lore
Share & tools
lore
#0 lore raw

Hi.

First of all: A happy new year in advance!

Now to my question:
In the kernel-configuration there are the two options:
CONFIG_BLK_DEV_CMD640 CMD640 chipset bugfix/support
and
CONFIG_BLK_DEV_RZ1000 RZ1000 chipset bugfix/support

At least the second of those two seems to cause some little slowdown ("This may slow disk throughput by a few percent, but at least things will operate 100% reliably.").
1) Is the bigfixing code only activated when a buggy chipset is detected or do I even have a slowdown with proper a properchipset?
2) Can some help me to find out if my system has one of those two chipsets. This might be a dumb question but I'm not sure if CMD640/RZ1000 are only some little IDE controller chipsets or if they were some kind of Southbridge/Nortbridge. If got a Epox 8KTA2 mainboard (having VIA VT82C686A/B chipset).

Thanks in advance!

Greetings,
Christoph Anton Mitterer.

begin:vcard
fn:Mitterer, Christoph Anton
n:Mitterer;Christoph Anton
org:Munich University of Applied Sciences;Department of Mathematics and Computer Science adr;quoted-printable;quoted-printable:;;Lothstra=C3=9Fe 34;M=C3=BCnchen;Freistaat Bayern;80335;Federal Republic of Germany email;internet:[email protected]
tel;home:+49 89 24409390
tel;cell:+49 172 8617341
x-mozilla-html:TRUE
url:http://fhm.edu/
version:2.1
end:vcard

#1 lore raw

Am 2004-12-31 23:26:14, schrieb Christoph Anton Mitterer:

Quoted 10 lines

Hi.

CONFIG_BLK_DEV_CMD640 CMD640 chipset bugfix/support
CONFIG_BLK_DEV_RZ1000 RZ1000 chipset bugfix/support

2) Can some help me to find out if my system has one of those two chipsets. This might be a dumb question but I'm not sure if CMD640/RZ1000 are only some little IDE controller chipsets or if they were some kind of Southbridge/Nortbridge.
If got a Epox 8KTA2 mainboard (having VIA VT82C686A/B chipset).

The CMD640 and RZ1000 are realy old...
I think it wat the time around P1 or something like this.

Forget it. - You do not need it.

Quoted 4 lines

Thanks in advance!

Greetings,
Christoph Anton Mitterer.

Greetings
Michelle

Signature · 4 lines
Linux-User #280138 with the Linux Counter, http://counter.li.org/ 
Michelle Konzack   Apt. 917                  ICQ #328449886
                   50, rue de Soultz         MSM LinuxMichi
0033/3/88452356    67100 Strasbourg/France   IRC #Debian (irc.icq.com)
#2 lore raw
In reply to Christoph Anton Mitterer
Quoted 4 lines · Christoph Anton Mitterer

Hi.

First of all: A happy new year in advance!

Quoted 8 lines

Now to my question:
In the kernel-configuration there are the two options:
CONFIG_BLK_DEV_CMD640 CMD640 chipset bugfix/support
and
CONFIG_BLK_DEV_RZ1000 RZ1000 chipset bugfix/support

At least the second of those two seems to cause some little slowdown ("This may slow disk throughput by a few percent, but at least things

They only trigger for the affected chipsets

#3 lore raw
Quoted 11 lines · Alan Cox
Quoted 10 lines · Christoph Anton Mitterer

Hi.

First of all: A happy new year in advance!

Now to my question:
In the kernel-configuration there are the two options:
CONFIG_BLK_DEV_CMD640 CMD640 chipset bugfix/support
and
CONFIG_BLK_DEV_RZ1000 RZ1000 chipset bugfix/support

Quoted 3 lines
Quoted 2 lines

At least the second of those two seems to cause some little slowdown ("This may slow disk throughput by a few percent, but at least things

They only trigger for the affected chipsets

But enabled by default. Maybe disable it by default ? Or make depend with CONFIG_M586 || CONFIG_M586TSC || CONFIG_M586MMX ?

#4 lore raw
Quoted 5 lines · Andrey Melnikoff
Quoted 3 lines
Quoted 2 lines

At least the second of those two seems to cause some little slowdown ("This may slow disk throughput by a few percent, but at least things

They only trigger for the affected chipsets

But enabled by default. Maybe disable it by default ? Or make depend with CONFIG_M586 || CONFIG_M586TSC || CONFIG_M586MMX ?

They should be enabled by default. That makes it safer for default compiles, and their code size is close to if not nil because it can all be __devinit or __init

#5 lore raw
Quoted 8 lines · Alan Cox
Quoted 5 lines · Andrey Melnikoff
Quoted 3 lines
Quoted 2 lines

At least the second of those two seems to cause some little slowdown ("This may slow disk throughput by a few percent, but at least things

They only trigger for the affected chipsets

But enabled by default. Maybe disable it by default ? Or make depend with CONFIG_M586 || CONFIG_M586TSC || CONFIG_M586MMX ?

They should be enabled by default.

Why? This is really _OLD_ and _BUGGY_ chips. As I see in google - it used in Asustek Pentium MB PCI/I-P54SP4 and some Intel mb for Pentium with Neptune chipsets. All of this MB - for classic Pentium 75/90/100MHz.

Quoted 2 lines

That makes it safer for default compiles, and their code size is close to if not nil because it can all be __devinit or __init

At this time, no modern MB use this buggy chipsets.

#6 lore raw
Quoted 6 lines · Andrey Melnikoff
Quoted 1 line · Alan Cox

They should be enabled by default.

Why? This is really _OLD_ and _BUGGY_ chips. As I see in google - it used in Asustek Pentium MB PCI/I-P54SP4 and some Intel mb for Pentium with Neptune chipsets. All of this MB - for classic Pentium 75/90/100MHz.

What about the following idea?
Both stay enabled by default but the help text explains exactly (as far as possible) which systems are affected.
This would help newbies like me to decide if those bugfixes are necessary or not.

Greetings,
cam.

#7 lore raw
Quoted 5 lines · Christoph Anton Mitterer

What about the following idea?
Both stay enabled by default but the help text explains exactly (as far as possible) which systems are affected.
This would help newbies like me to decide if those bugfixes are necessary or not.

Its the ideal solution. The diff for this is available on your computer already - its kept in /dev/null 8)

The PC-Technologies RZ1000 IDE chip is used on many common 486
and
Pentium motherboards, usually along with the "Neptune"
chipset.
Unfortunately, it has a rather nasty design flaw that can
cause
severe data corruption under many conditions. Say Y here to
include
code which automatically detects and corrects the problem
under
Linux. This may slow disk throughput by a few percent, but at
least
things will operate 100% reliably.

The CMD-Technologies CMD640 IDE chip is used on many common
486 and
Pentium motherboards, usually in combination with a "Neptune"
or
"SiS" chipset. Unfortunately, it has a number of rather nasty design flaws that can cause severe data corruption under many
common
conditions. Say Y here to include code which tries to
automatically
detect and correct the problems under Linux. This option also enables access to the secondary IDE ports in some CMD640 based systems.

#8 lore raw
Quoted 11 lines · Alan Cox
Quoted 5 lines · Christoph Anton Mitterer

What about the following idea?
Both stay enabled by default but the help text explains exactly (as far as possible) which systems are affected.
This would help newbies like me to decide if those bugfixes are necessary or not.

Its the ideal solution. The diff for this is available on your computer already - its kept in /dev/null 8)

Ok,... so here's my patch which I request for inclusion:
--- begin of patch ---

--- end of patch ---
(Ahh,.. my first kernel patch,... *lol* )

;-)

Seriously,.. I thought about adding something like:
"Most users of modern computers won't need this, but it is safer to say Y here."

But according to you answer I think that you like the way it's at the moment. =) Never mind! But if you think it's ok I could make a (real) patch which adds such a text.

Best wishes,
cam.

#9 lore raw
In reply to Andrey Melnikoff
Quoted 4 lines · Andrey Melnikoff
Quoted 1 line

They should be enabled by default.

Why? This is really _OLD_ and _BUGGY_ chips. As I see in google - it used in Asustek Pentium MB PCI/I-P54SP4 and some Intel mb for Pentium with Neptune chipsets. All of this MB - for classic Pentium 75/90/100MHz.

And the cost to you is .. zero.

Quoted 3 lines
Quoted 2 lines

That makes it safer for default compiles, and their code size is close to if not nil because it can all be __devinit or __init

At this time, no modern MB use this buggy chipsets.

And lots of people run old motherboards. The base kernel configuration by default is a mix between "things everyone wants, things defaulting on for safety reasons and linus computer"

Alan