setup.c (clean up only)

Hi,

Here is a patch that contains some clean up for bootmem_init() function. It should be (...well I hope so :-) ) a little bit more readable than previous versions.

Now IP27's specific code could be easly moved into its boot memory init. Look for FIXME pattern...

Franck.

Here it is !

Franck.

Quoted 13 lines · Franck Bui-Huu

Hi,

Here is a patch that contains some clean up for bootmem_init() function. It should be (...well I hope so :-) ) a little bit more readable than previous versions.

Now IP27's specific code could be easly moved into its boot memory init. Look for FIXME pattern...

Franck.

------------------------------------------------------------------------

setup.c renamed from setup-1_178.c +221 -154

@@ -67,6 +67,7 @@
 EXPORT_SYMBOL(mips_machtype);
 EXPORT_SYMBOL(mips_machgroup);
 
+int bootmem_init_ok;
 struct boot_mem_map boot_mem_map;
 
 static char command_line[CL_SIZE];

@@ -76,7 +77,7 @@
 * mips_io_port_base is the begin of the address space to which x86 style
 * I/O ports are mapped.
 */
-const unsigned long mips_io_port_base = -1;
+unsigned long mips_io_port_base = -1;
 EXPORT_SYMBOL(mips_io_port_base);
 
 /*

@@ -192,7 +193,102 @@
 	}
 }
 
-static inline int parse_rd_cmdline(unsigned long* rd_start, unsigned long* rd_end)
+#define PFN_UP(x)	phys_to_pfn(PAGE_ALIGN(x))
+#define PFN_DOWN(x)	phys_to_pfn(x)
+#define PFN_PHYS(x)	pfn_to_phys(x)
+
+#define MAXMEM		HIGHMEM_START
+#define MAXMEM_PFN	PFN_DOWN(MAXMEM)
+
+static void __init register_bootmem_low_pages(unsigned long max_low_pfn, 
+					      unsigned long start_pfn)
+{
+	unsigned long curr_pfn, last_pfn, size;
+	int i;
+
+	for (i = 0; i < boot_mem_map.nr_map; i++) {
+		/*
+		 * Reserve usable memory.
+		 */
+		if (boot_mem_map.map[i].type != BOOT_MEM_RAM)
+			continue;
+
+		/*
+		 * We are rounding up the start address of usable memory:
+		 */
+		curr_pfn = PFN_UP(boot_mem_map.map[i].addr);
+		if (curr_pfn >= max_low_pfn)
+			continue;
+		if (curr_pfn < start_pfn)
+			curr_pfn = start_pfn;
+
+		/*
+		 * ... and at the end of the usable range downwards:
+		 */
+		last_pfn = PFN_DOWN(boot_mem_map.map[i].addr
+				    + boot_mem_map.map[i].size);
+
+		if (last_pfn > max_low_pfn)
+			last_pfn = max_low_pfn;
+
+		/*
+		 * Only register lowmem part of lowmem segment with bootmem.
+		 */
+		size = last_pfn - curr_pfn;
+		if (curr_pfn > PFN_DOWN(HIGHMEM_START))
+			continue;
+		if (curr_pfn + size - 1 > PFN_DOWN(HIGHMEM_START))
+			size = PFN_DOWN(HIGHMEM_START) - curr_pfn;
+		if (!size)
+			continue;
+
+		/*
+		 * ... finally, did all the rounding and playing
+		 * around just make the area go away?
+		 */
+		if (last_pfn <= curr_pfn)
+			continue;
+
+		/* Register lowmem ranges */
+		free_bootmem(PFN_PHYS(curr_pfn), size * PAGE_SIZE);
+	}
+}
+
+static unsigned long  __init find_max_pfn(unsigned long start_pfn)
+{
+	unsigned long first_usable_pfn = -1UL;
+	int i;
+	
+	max_pfn = 0;
+
+	for (i = 0; i < boot_mem_map.nr_map; i++) {
+		unsigned long start, end;
+
+		if (boot_mem_map.map[i].type != BOOT_MEM_RAM)
+			continue;
+
+		start = PFN_UP(boot_mem_map.map[i].addr);
+		end = PFN_DOWN(boot_mem_map.map[i].addr
+		      + boot_mem_map.map[i].size);
+
+		if (start >= end)
+			continue;
+		if (end > max_pfn)
+			max_pfn = end;
+		if (start < first_usable_pfn) {
+			if (start > start_pfn) {
+				first_usable_pfn = start;
+			} else if (end > start_pfn) {
+				first_usable_pfn = start_pfn;
+			}
+		}
+	}
+	return first_usable_pfn;
+}
+
+#ifdef CONFIG_BLK_DEV_INITRD
+
+static int __init parse_rd_cmdline(unsigned long* rd_start, unsigned long* rd_end)
 {
 	/*
 	 * "rd_start=0xNNNNNNNN" defines the memory address of an initrd

@@ -255,79 +351,114 @@
 	return 0;
 }
 
-#define PFN_UP(x)	(((x) + PAGE_SIZE - 1) >> PAGE_SHIFT)
-#define PFN_DOWN(x)	((x) >> PAGE_SHIFT)
-#define PFN_PHYS(x)	((x) << PAGE_SHIFT)
+unsigned long __init init_initrd(void)
+{
+	unsigned long tmp, end;
+	u32 *initrd_header;
 
-#define MAXMEM		HIGHMEM_START
-#define MAXMEM_PFN	PFN_DOWN(MAXMEM)
+	ROOT_DEV = Root_RAM0;
+	if (parse_rd_cmdline(&initrd_start, &initrd_end))
+		return initrd_end;
+
+	/* 
+	 * Board specific code should have set up initrd_start 
+	 * and initrd_end...
+	 */
+	end = (unsigned long)&_end;
+	tmp = ((end + PAGE_SIZE-1) & PAGE_MASK) - sizeof(u32) * 2;
+	if (tmp < end)
+		tmp += PAGE_SIZE;
+	
+	initrd_header = (u32 *)tmp;
+	if (initrd_header[0] == 0x494E5244) {
+		initrd_start = (unsigned long)&initrd_header[2];
+		initrd_end = initrd_start + initrd_header[1];
+	}
+	return initrd_end;
+}
+
+void __init finalize_initrd(void)
+{
+	unsigned long phys_initrd_start;
+	unsigned long phys_initrd_end;
+	unsigned long initrd_size;
+	unsigned long phys_min_low;
+
+	phys_initrd_start = __pa(initrd_start);
+	phys_initrd_end   = __pa(initrd_end);
+	initrd_size       = phys_initrd_end - phys_initrd_start;
+
+	if (!initrd_size) {
+		printk(KERN_INFO "Initrd not found or empty");
+		goto check_ko;
+	}
+	if (phys_initrd_end > PFN_PHYS(max_low_pfn)) {
+		printk(KERN_CRIT "Initrd extends beyond end of memory ");
+		goto check_ko;
+	}
+	/* 
+	 * This seems to be the right place for this
+	 */
+	phys_min_low = PFN_PHYS(min_low_pfn);
+        if (!initrd_below_start_ok && phys_initrd_start < phys_min_low) {
+                printk(KERN_CRIT "Initrd overwritten (0x%p < 0x%p)",
+		       (void *)initrd_start, phys_to_virt(phys_min_low));
+                goto check_ko;
+        }
+
+	reserve_bootmem(__pa(initrd_start), initrd_size);
+	printk(KERN_INFO "Initial ramdisk at: 0x%p (%lu bytes)\n",
+	       (void *)initrd_start, initrd_size);
+	return;
+check_ko:
+	printk(" - disabling initrd\n");
+	initrd_start = 0;
+	initrd_end = 0;
+}
+
+#else
+
+unsigned long __init init_initrd(void) { return 0; }
+void __init finalize_initrd(void) {}
 
-static inline void bootmem_init(void)
+#endif /* CONFIG_BLK_DEV_INITRD  */
+
+
+static void  __init bootmem_init(void)
 {
 	unsigned long start_pfn;
-	unsigned long reserved_end = (unsigned long)&_end;
-#ifndef CONFIG_SGI_IP27
+	unsigned long reserved_end;
 	unsigned long first_usable_pfn;
 	unsigned long bootmap_size;
-	int i;
+
+#ifdef CONFIG_SGI_IP27
+	/* FIXME: This should be move in ip27 code */
+	init_initrd();
+	finalize_initrd();
+	bootmem_init_ok = 1; 
 #endif
-#ifdef CONFIG_BLK_DEV_INITRD
-	int initrd_reserve_bootmem = 0;
+	if (bootmem_init_ok)
+		return;
 
-	/* Board specific code should have set up initrd_start and initrd_end */
- 	ROOT_DEV = Root_RAM0;
-	if (parse_rd_cmdline(&initrd_start, &initrd_end)) {
-		reserved_end = max(reserved_end, initrd_end);
-		initrd_reserve_bootmem = 1;
-	} else {
-		unsigned long tmp;
-		u32 *initrd_header;
-
-		tmp = ((reserved_end + PAGE_SIZE-1) & PAGE_MASK) - sizeof(u32) * 2;
-		if (tmp < reserved_end)
-			tmp += PAGE_SIZE;
-		initrd_header = (u32 *)tmp;
-		if (initrd_header[0] == 0x494E5244) {
-			initrd_start = (unsigned long)&initrd_header[2];
-			initrd_end = initrd_start + initrd_header[1];
-			reserved_end = max(reserved_end, initrd_end);
-			initrd_reserve_bootmem = 1;
-		}
-	}
-#endif	/* CONFIG_BLK_DEV_INITRD */
+	/* 
+	 * Init initrd_start & initrd_end, in case we need
+	 * to support an init ram disk
+	 */
+	reserved_end = max((unsigned long)&_end, init_initrd());
 
 	/*
 	 * Partially used pages are not usable - thus
 	 * we are rounding upwards.
 	 */
+#if defined(CONFIG_MIPS64) && !defined(CONFIG_BUILD_ELF64)
 	start_pfn = PFN_UP(CPHYSADDR(reserved_end));
-
-#ifndef CONFIG_SGI_IP27
-	/* Find the highest page frame number we have available.  */
-	max_pfn = 0;
-	first_usable_pfn = -1UL;
-	for (i = 0; i < boot_mem_map.nr_map; i++) {
-		unsigned long start, end;
-
-		if (boot_mem_map.map[i].type != BOOT_MEM_RAM)
-			continue;
-
-		start = PFN_UP(boot_mem_map.map[i].addr);
-		end = PFN_DOWN(boot_mem_map.map[i].addr
-		      + boot_mem_map.map[i].size);
-
-		if (start >= end)
-			continue;
-		if (end > max_pfn)
-			max_pfn = end;
-		if (start < first_usable_pfn) {
-			if (start > start_pfn) {
-				first_usable_pfn = start;
-			} else if (end > start_pfn) {
-				first_usable_pfn = start_pfn;
-			}
-		}
-	}
+#else
+	start_pfn = PFN_UP(__pa(reserved_end));	
+#endif
+	/* 
+	 * Find the highest page frame number we have available.
+	 */
+	first_usable_pfn = find_max_pfn(start_pfn);
 
 	/*
 	 * Determine low and high memory ranges

@@ -335,111 +466,48 @@
 	max_low_pfn = max_pfn;
 	if (max_low_pfn > MAXMEM_PFN) {
 		max_low_pfn = MAXMEM_PFN;
-#ifndef CONFIG_HIGHMEM
-		/* Maximum memory usable is what is directly addressable */
-		printk(KERN_WARNING "Warning only %ldMB will be used.\n",
-		       MAXMEM >> 20);
-		printk(KERN_WARNING "Use a HIGHMEM enabled kernel.\n");
-#endif
 	}
 
 #ifdef CONFIG_HIGHMEM
 	/*
-	 * Crude, we really should make a better attempt at detecting
-	 * highstart_pfn
+	 * Crude, we really should make a better attempt at 
+	 * detecting highstart_pfn
 	 */
-	highstart_pfn = highend_pfn = max_pfn;
-	if (max_pfn > MAXMEM_PFN) {
-		highstart_pfn = MAXMEM_PFN;
-		printk(KERN_NOTICE "%ldMB HIGHMEM available.\n",
-		       (highend_pfn - highstart_pfn) >> (20 - PAGE_SHIFT));
-	}
+	highstart_pfn = max_low_pfn;
+	highend_pfn = max_pfn;
+
+	printk(KERN_NOTICE "%ldMB HIGHMEM available.\n",
+	       (highend_pfn - highstart_pfn) >> (20 - PAGE_SHIFT));
 #endif
+	printk(KERN_NOTICE "%ldMB LOWMEM available.\n",
+	       (max_low_pfn - first_usable_pfn) >> (20 - PAGE_SHIFT));
 
-	/* Initialize the boot-time allocator with low memory only.  */
+	/* 
+	 * Initialize the boot-time allocator with low memory only.
+	 */
 	bootmap_size = init_bootmem(first_usable_pfn, max_low_pfn);
 
 	/*
 	 * Register fully available low RAM pages with the bootmem allocator.
 	 */
-	for (i = 0; i < boot_mem_map.nr_map; i++) {
-		unsigned long curr_pfn, last_pfn, size;
-
-		/*
-		 * Reserve usable memory.
-		 */
-		if (boot_mem_map.map[i].type != BOOT_MEM_RAM)
-			continue;
+	register_bootmem_low_pages(max_low_pfn, start_pfn);
 
-		/*
-		 * We are rounding up the start address of usable memory:
-		 */
-		curr_pfn = PFN_UP(boot_mem_map.map[i].addr);
-		if (curr_pfn >= max_low_pfn)
-			continue;
-		if (curr_pfn < start_pfn)
-			curr_pfn = start_pfn;
-
-		/*
-		 * ... and at the end of the usable range downwards:
-		 */
-		last_pfn = PFN_DOWN(boot_mem_map.map[i].addr
-				    + boot_mem_map.map[i].size);
-
-		if (last_pfn > max_low_pfn)
-			last_pfn = max_low_pfn;
-
-		/*
-		 * Only register lowmem part of lowmem segment with bootmem.
-		 */
-		size = last_pfn - curr_pfn;
-		if (curr_pfn > PFN_DOWN(HIGHMEM_START))
-			continue;
-		if (curr_pfn + size - 1 > PFN_DOWN(HIGHMEM_START))
-			size = PFN_DOWN(HIGHMEM_START) - curr_pfn;
-		if (!size)
-			continue;
-
-		/*
-		 * ... finally, did all the rounding and playing
-		 * around just make the area go away?
-		 */
-		if (last_pfn <= curr_pfn)
-			continue;
-
-		/* Register lowmem ranges */
-		free_bootmem(PFN_PHYS(curr_pfn), PFN_PHYS(size));
-	}
-
-	/* Reserve the bootmap memory.  */
+	/*
+	 * Reserve the bootmem bitmap itself as well. We do this in two
+	 * steps (first step was init_bootmem()) because this catches
+	 * the (very unlikely) case of us accidentally initializing the
+	 * bootmem allocator with an invalid RAM area.
+	 */
 	reserve_bootmem(PFN_PHYS(first_usable_pfn), bootmap_size);
-#endif /* CONFIG_SGI_IP27 */
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	initrd_below_start_ok = 1;
-	if (initrd_start) {
-		unsigned long initrd_size = ((unsigned char *)initrd_end) - ((unsigned char *)initrd_start);
-		printk("Initial ramdisk at: 0x%p (%lu bytes)\n",
-		       (void *)initrd_start, initrd_size);
-
-		if (CPHYSADDR(initrd_end) > PFN_PHYS(max_low_pfn)) {
-			printk("initrd extends beyond end of memory "
-			       "(0x%0*Lx > 0x%0*Lx)\ndisabling initrd\n",
-			       sizeof(long) * 2,
-			       (unsigned long long)CPHYSADDR(initrd_end),
-			       sizeof(long) * 2,
-			       (unsigned long long)PFN_PHYS(max_low_pfn));
-			initrd_start = initrd_end = 0;
-			initrd_reserve_bootmem = 0;
-		}
 
-		if (initrd_reserve_bootmem)
-			reserve_bootmem(CPHYSADDR(initrd_start), initrd_size);
-	}
-#endif /* CONFIG_BLK_DEV_INITRD  */
+	/*
+	 * Eventually, check that initrd values are correct and not
+	 * confloct with memory limits
+	 */
+	finalize_initrd();
 }
 
-static inline void resource_init(void)
+static void resource_init(void)
 {
 	int i;
 

@@ -453,10 +521,10 @@
 	data_resource.start = CPHYSADDR(&_etext);
 	data_resource.end = CPHYSADDR(&_edata) - 1;
 #else
-	code_resource.start = virt_to_phys(&_text);
-	code_resource.end = virt_to_phys(&_etext) - 1;
-	data_resource.start = virt_to_phys(&_etext);
-	data_resource.end = virt_to_phys(&_edata) - 1;
+ 	code_resource.start = virt_to_phys(&_text);
+ 	code_resource.end = virt_to_phys(&_etext) - 1;
+ 	data_resource.start = virt_to_phys(&_etext);
+ 	data_resource.end = virt_to_phys(&_edata) - 1;
 #endif
 
 	/*

@@ -567,5 +635,4 @@
 
 	return 1;
 }
-
 __setup("nofpu", fpu_disable);

Well, thanks for your answers...
Are there any protocols for submiting patchs that I should know ?

Thanks.

Franck

Quoted 481 lines · Franck Bui-Huu

Here it is !

Franck.

Quoted 13 lines · Franck Bui-Huu

Hi,

Here is a patch that contains some clean up for bootmem_init() function. It should be (...well I hope so :-) ) a little bit more readable than previous versions.

Now IP27's specific code could be easly moved into its boot memory init. Look for FIXME pattern...

Franck.

------------------------------------------------------------------------

setup.c 2005-01-11 09:12:17.401209352 +0100 renamed from setup-1_178.c 2005-01-10 19:18:29.000000000 +0100 +1 -0

@@ -67,6 +67,7 @@
 EXPORT_SYMBOL(mips_machtype);
 EXPORT_SYMBOL(mips_machgroup);
 
+int bootmem_init_ok;
 struct boot_mem_map boot_mem_map;
 
 static char command_line[CL_SIZE];

@@ -76,7 +77,7 @@
 * mips_io_port_base is the begin of the address space to which x86 

style
* I/O ports are mapped.
*/

setup.c 2005-01-11 09:12:17.401209352 +0100 renamed from setup-1_178.c 2005-01-10 19:18:29.000000000 +0100 +1 -1

-const unsigned long mips_io_port_base = -1;
+unsigned long mips_io_port_base = -1;

EXPORT_SYMBOL(mips_io_port_base);

/*

setup.c 2005-01-11 09:12:17.401209352 +0100 renamed from setup-1_178.c 2005-01-10 19:18:29.000000000 +0100 +95 -1

@@ -192,7 +193,102 @@
    }
 }
 
-static inline int parse_rd_cmdline(unsigned long* rd_start, unsigned 
 long* rd_end)
+#define PFN_UP(x)    phys_to_pfn(PAGE_ALIGN(x))
+#define PFN_DOWN(x)    phys_to_pfn(x)
+#define PFN_PHYS(x)    pfn_to_phys(x)
+
+#define MAXMEM        HIGHMEM_START
+#define MAXMEM_PFN    PFN_DOWN(MAXMEM)
+
+static void __init register_bootmem_low_pages(unsigned long 
 max_low_pfn, +                          unsigned long start_pfn)
+{
+    unsigned long curr_pfn, last_pfn, size;
+    int i;
+
+    for (i = 0; i < boot_mem_map.nr_map; i++) {
+        /*
+         * Reserve usable memory.
+         */
+        if (boot_mem_map.map[i].type != BOOT_MEM_RAM)
+            continue;
+
+        /*
+         * We are rounding up the start address of usable memory:
+         */
+        curr_pfn = PFN_UP(boot_mem_map.map[i].addr);
+        if (curr_pfn >= max_low_pfn)
+            continue;
+        if (curr_pfn < start_pfn)
+            curr_pfn = start_pfn;
+
+        /*
+         * ... and at the end of the usable range downwards:
+         */
+        last_pfn = PFN_DOWN(boot_mem_map.map[i].addr
+                    + boot_mem_map.map[i].size);
+
+        if (last_pfn > max_low_pfn)
+            last_pfn = max_low_pfn;
+
+        /*
+         * Only register lowmem part of lowmem segment with bootmem.
+         */
+        size = last_pfn - curr_pfn;
+        if (curr_pfn > PFN_DOWN(HIGHMEM_START))
+            continue;
+        if (curr_pfn + size - 1 > PFN_DOWN(HIGHMEM_START))
+            size = PFN_DOWN(HIGHMEM_START) - curr_pfn;
+        if (!size)
+            continue;
+
+        /*
+         * ... finally, did all the rounding and playing
+         * around just make the area go away?
+         */
+        if (last_pfn <= curr_pfn)
+            continue;
+
+        /* Register lowmem ranges */
+        free_bootmem(PFN_PHYS(curr_pfn), size * PAGE_SIZE);
+    }
+}
+
+static unsigned long  __init find_max_pfn(unsigned long start_pfn)
+{
+    unsigned long first_usable_pfn = -1UL;
+    int i;
+   
+    max_pfn = 0;
+
+    for (i = 0; i < boot_mem_map.nr_map; i++) {
+        unsigned long start, end;
+
+        if (boot_mem_map.map[i].type != BOOT_MEM_RAM)
+            continue;
+
+        start = PFN_UP(boot_mem_map.map[i].addr);
+        end = PFN_DOWN(boot_mem_map.map[i].addr
+              + boot_mem_map.map[i].size);
+
+        if (start >= end)
+            continue;
+        if (end > max_pfn)
+            max_pfn = end;
+        if (start < first_usable_pfn) {
+            if (start > start_pfn) {
+                first_usable_pfn = start;
+            } else if (end > start_pfn) {
+                first_usable_pfn = start_pfn;
+            }
+        }
+    }
+    return first_usable_pfn;
+}
+
+#ifdef CONFIG_BLK_DEV_INITRD
+
+static int __init parse_rd_cmdline(unsigned long* rd_start, unsigned 
 long* rd_end)

{
/*
* "rd_start=0xNNNNNNNN" defines the memory address of an initrd

setup.c 2005-01-11 09:12:17.401209352 +0100 renamed from setup-1_178.c 2005-01-10 19:18:29.000000000 +0100 +79 -12

@@ -255,79 +351,114 @@
    return 0;
 }
 
-#define PFN_UP(x)    (((x) + PAGE_SIZE - 1) >> PAGE_SHIFT)
-#define PFN_DOWN(x)    ((x) >> PAGE_SHIFT)
-#define PFN_PHYS(x)    ((x) << PAGE_SHIFT)
+unsigned long __init init_initrd(void)
+{
+    unsigned long tmp, end;
+    u32 *initrd_header;
 
-#define MAXMEM        HIGHMEM_START
-#define MAXMEM_PFN    PFN_DOWN(MAXMEM)
+    ROOT_DEV = Root_RAM0;
+    if (parse_rd_cmdline(&initrd_start, &initrd_end))
+        return initrd_end;
+
+    /* +     * Board specific code should have set up initrd_start 
+     * and initrd_end...
+     */
+    end = (unsigned long)&_end;
+    tmp = ((end + PAGE_SIZE-1) & PAGE_MASK) - sizeof(u32) * 2;
+    if (tmp < end)
+        tmp += PAGE_SIZE;
+   
+    initrd_header = (u32 *)tmp;
+    if (initrd_header[0] == 0x494E5244) {
+        initrd_start = (unsigned long)&initrd_header[2];
+        initrd_end = initrd_start + initrd_header[1];
+    }
+    return initrd_end;
+}
+
+void __init finalize_initrd(void)
+{
+    unsigned long phys_initrd_start;
+    unsigned long phys_initrd_end;
+    unsigned long initrd_size;
+    unsigned long phys_min_low;
+
+    phys_initrd_start = __pa(initrd_start);
+    phys_initrd_end   = __pa(initrd_end);
+    initrd_size       = phys_initrd_end - phys_initrd_start;
+
+    if (!initrd_size) {
+        printk(KERN_INFO "Initrd not found or empty");
+        goto check_ko;
+    }
+    if (phys_initrd_end > PFN_PHYS(max_low_pfn)) {
+        printk(KERN_CRIT "Initrd extends beyond end of memory ");
+        goto check_ko;
+    }
+    /* +     * This seems to be the right place for this
+     */
+    phys_min_low = PFN_PHYS(min_low_pfn);
+        if (!initrd_below_start_ok && phys_initrd_start < 
 phys_min_low) {
+                printk(KERN_CRIT "Initrd overwritten (0x%p < 0x%p)",
+               (void *)initrd_start, phys_to_virt(phys_min_low));
+                goto check_ko;
+        }
+
+    reserve_bootmem(__pa(initrd_start), initrd_size);
+    printk(KERN_INFO "Initial ramdisk at: 0x%p (%lu bytes)\n",
+           (void *)initrd_start, initrd_size);
+    return;
+check_ko:
+    printk(" - disabling initrd\n");
+    initrd_start = 0;
+    initrd_end = 0;
+}
+
+#else
+
+unsigned long __init init_initrd(void) { return 0; }
+void __init finalize_initrd(void) {}
 
-static inline void bootmem_init(void)
+#endif /* CONFIG_BLK_DEV_INITRD  */
+
+
+static void  __init bootmem_init(void)
 {
    unsigned long start_pfn;
-    unsigned long reserved_end = (unsigned long)&_end;
-#ifndef CONFIG_SGI_IP27
+    unsigned long reserved_end;
    unsigned long first_usable_pfn;
    unsigned long bootmap_size;
-    int i;
+
+#ifdef CONFIG_SGI_IP27
+    /* FIXME: This should be move in ip27 code */
+    init_initrd();
+    finalize_initrd();
+    bootmem_init_ok = 1; #endif
-#ifdef CONFIG_BLK_DEV_INITRD
-    int initrd_reserve_bootmem = 0;
+    if (bootmem_init_ok)
+        return;
 
-    /* Board specific code should have set up initrd_start and 

initrd_end */

setup.c 2005-01-11 09:12:17.401209352 +0100 renamed from setup-1_178.c 2005-01-10 19:18:29.000000000 +0100 +0 -9

-     ROOT_DEV = Root_RAM0;
-    if (parse_rd_cmdline(&initrd_start, &initrd_end)) {
-        reserved_end = max(reserved_end, initrd_end);
-        initrd_reserve_bootmem = 1;
-    } else {
-        unsigned long tmp;
-        u32 *initrd_header;
-
-        tmp = ((reserved_end + PAGE_SIZE-1) & PAGE_MASK) - 

sizeof(u32) * 2;

setup.c 2005-01-11 09:12:17.401209352 +0100 renamed from setup-1_178.c 2005-01-10 19:18:29.000000000 +0100 +12 -46

-        if (tmp < reserved_end)
-            tmp += PAGE_SIZE;
-        initrd_header = (u32 *)tmp;
-        if (initrd_header[0] == 0x494E5244) {
-            initrd_start = (unsigned long)&initrd_header[2];
-            initrd_end = initrd_start + initrd_header[1];
-            reserved_end = max(reserved_end, initrd_end);
-            initrd_reserve_bootmem = 1;
-        }
-    }
-#endif    /* CONFIG_BLK_DEV_INITRD */
+    /* +     * Init initrd_start & initrd_end, in case we need
+     * to support an init ram disk
+     */
+    reserved_end = max((unsigned long)&_end, init_initrd());
 
    /*
     * Partially used pages are not usable - thus
     * we are rounding upwards.
     */
+#if defined(CONFIG_MIPS64) && !defined(CONFIG_BUILD_ELF64)
    start_pfn = PFN_UP(CPHYSADDR(reserved_end));
-
-#ifndef CONFIG_SGI_IP27
-    /* Find the highest page frame number we have available.  */
-    max_pfn = 0;
-    first_usable_pfn = -1UL;
-    for (i = 0; i < boot_mem_map.nr_map; i++) {
-        unsigned long start, end;
-
-        if (boot_mem_map.map[i].type != BOOT_MEM_RAM)
-            continue;
-
-        start = PFN_UP(boot_mem_map.map[i].addr);
-        end = PFN_DOWN(boot_mem_map.map[i].addr
-              + boot_mem_map.map[i].size);
-
-        if (start >= end)
-            continue;
-        if (end > max_pfn)
-            max_pfn = end;
-        if (start < first_usable_pfn) {
-            if (start > start_pfn) {
-                first_usable_pfn = start;
-            } else if (end > start_pfn) {
-                first_usable_pfn = start_pfn;
-            }
-        }
-    }
+#else
+    start_pfn = PFN_UP(__pa(reserved_end));   
+#endif
+    /* +     * Find the highest page frame number we have available.
+     */
+    first_usable_pfn = find_max_pfn(start_pfn);
 
    /*
     * Determine low and high memory ranges

@@ -335,111 +466,48 @@
    max_low_pfn = max_pfn;
    if (max_low_pfn > MAXMEM_PFN) {
        max_low_pfn = MAXMEM_PFN;
-#ifndef CONFIG_HIGHMEM
-        /* Maximum memory usable is what is directly addressable */
-        printk(KERN_WARNING "Warning only %ldMB will be used.\n",
-               MAXMEM >> 20);
-        printk(KERN_WARNING "Use a HIGHMEM enabled kernel.\n");
-#endif
    }
 
 #ifdef CONFIG_HIGHMEM
    /*
-     * Crude, we really should make a better attempt at detecting
-     * highstart_pfn
+     * Crude, we really should make a better attempt at +     * 

detecting highstart_pfn

     */

setup.c 2005-01-11 09:12:17.401209352 +0100 renamed from setup-1_178.c 2005-01-10 19:18:29.000000000 +0100 +5 -6

-    highstart_pfn = highend_pfn = max_pfn;
-    if (max_pfn > MAXMEM_PFN) {
-        highstart_pfn = MAXMEM_PFN;
-        printk(KERN_NOTICE "%ldMB HIGHMEM available.\n",
-               (highend_pfn - highstart_pfn) >> (20 - PAGE_SHIFT));
-    }
+    highstart_pfn = max_low_pfn;
+    highend_pfn = max_pfn;
+
+    printk(KERN_NOTICE "%ldMB HIGHMEM available.\n",
+           (highend_pfn - highstart_pfn) >> (20 - PAGE_SHIFT));

#endif

setup.c 2005-01-11 09:12:17.401209352 +0100 renamed from setup-1_178.c 2005-01-10 19:18:29.000000000 +0100 +4 -1

+    printk(KERN_NOTICE "%ldMB LOWMEM available.\n",
+           (max_low_pfn - first_usable_pfn) >> (20 - PAGE_SHIFT));
 
-    /* Initialize the boot-time allocator with low memory only.  */
+    /* +     * Initialize the boot-time allocator with low memory only.
+     */
    bootmap_size = init_bootmem(first_usable_pfn, max_low_pfn);
 
    /*
     * Register fully available low RAM pages with the bootmem 

allocator.

     */

setup.c 2005-01-11 09:12:17.401209352 +0100 renamed from setup-1_178.c 2005-01-10 19:18:29.000000000 +0100 +7 -55

-    for (i = 0; i < boot_mem_map.nr_map; i++) {
-        unsigned long curr_pfn, last_pfn, size;
-
-        /*
-         * Reserve usable memory.
-         */
-        if (boot_mem_map.map[i].type != BOOT_MEM_RAM)
-            continue;
+    register_bootmem_low_pages(max_low_pfn, start_pfn);
 
-        /*
-         * We are rounding up the start address of usable memory:
-         */
-        curr_pfn = PFN_UP(boot_mem_map.map[i].addr);
-        if (curr_pfn >= max_low_pfn)
-            continue;
-        if (curr_pfn < start_pfn)
-            curr_pfn = start_pfn;
-
-        /*
-         * ... and at the end of the usable range downwards:
-         */
-        last_pfn = PFN_DOWN(boot_mem_map.map[i].addr
-                    + boot_mem_map.map[i].size);
-
-        if (last_pfn > max_low_pfn)
-            last_pfn = max_low_pfn;
-
-        /*
-         * Only register lowmem part of lowmem segment with bootmem.
-         */
-        size = last_pfn - curr_pfn;
-        if (curr_pfn > PFN_DOWN(HIGHMEM_START))
-            continue;
-        if (curr_pfn + size - 1 > PFN_DOWN(HIGHMEM_START))
-            size = PFN_DOWN(HIGHMEM_START) - curr_pfn;
-        if (!size)
-            continue;
-
-        /*
-         * ... finally, did all the rounding and playing
-         * around just make the area go away?
-         */
-        if (last_pfn <= curr_pfn)
-            continue;
-
-        /* Register lowmem ranges */
-        free_bootmem(PFN_PHYS(curr_pfn), PFN_PHYS(size));
-    }
-
-    /* Reserve the bootmap memory.  */
+    /*
+     * Reserve the bootmem bitmap itself as well. We do this in two
+     * steps (first step was init_bootmem()) because this catches
+     * the (very unlikely) case of us accidentally initializing the
+     * bootmem allocator with an invalid RAM area.
+     */
    reserve_bootmem(PFN_PHYS(first_usable_pfn), bootmap_size);
-#endif /* CONFIG_SGI_IP27 */
-
-#ifdef CONFIG_BLK_DEV_INITRD
-    initrd_below_start_ok = 1;
-    if (initrd_start) {
-        unsigned long initrd_size = ((unsigned char *)initrd_end) - 

((unsigned char *)initrd_start);

setup.c 2005-01-11 09:12:17.401209352 +0100 renamed from setup-1_178.c 2005-01-10 19:18:29.000000000 +0100 +5 -17

-        printk("Initial ramdisk at: 0x%p (%lu bytes)\n",
-               (void *)initrd_start, initrd_size);
-
-        if (CPHYSADDR(initrd_end) > PFN_PHYS(max_low_pfn)) {
-            printk("initrd extends beyond end of memory "
-                   "(0x%0*Lx > 0x%0*Lx)\ndisabling initrd\n",
-                   sizeof(long) * 2,
-                   (unsigned long long)CPHYSADDR(initrd_end),
-                   sizeof(long) * 2,
-                   (unsigned long long)PFN_PHYS(max_low_pfn));
-            initrd_start = initrd_end = 0;
-            initrd_reserve_bootmem = 0;
-        }
 
-        if (initrd_reserve_bootmem)
-            reserve_bootmem(CPHYSADDR(initrd_start), initrd_size);
-    }
-#endif /* CONFIG_BLK_DEV_INITRD  */
+    /*
+     * Eventually, check that initrd values are correct and not
+     * confloct with memory limits
+     */
+    finalize_initrd();

}

setup.c 2005-01-11 09:12:17.401209352 +0100 renamed from setup-1_178.c 2005-01-10 19:18:29.000000000 +0100 +1 -1

-static inline void resource_init(void)
+static void resource_init(void)

{
    int i;

setup.c 2005-01-11 09:12:17.401209352 +0100 renamed from setup-1_178.c 2005-01-10 19:18:29.000000000 +0100 +4 -5

@@ -453,10 +521,10 @@
    data_resource.start = CPHYSADDR(&_etext);
    data_resource.end = CPHYSADDR(&_edata) - 1;
 #else
-    code_resource.start = virt_to_phys(&_text);
-    code_resource.end = virt_to_phys(&_etext) - 1;
-    data_resource.start = virt_to_phys(&_etext);
-    data_resource.end = virt_to_phys(&_edata) - 1;
+     code_resource.start = virt_to_phys(&_text);
+     code_resource.end = virt_to_phys(&_etext) - 1;
+     data_resource.start = virt_to_phys(&_etext);
+     data_resource.end = virt_to_phys(&_edata) - 1;
 #endif
 
    /*

@@ -567,5 +635,4 @@
 
    return 1;
 }
-
 __setup("nofpu", fpu_disable);