Skip to contentSkip to conversation

Direct PCI Access

DISCUSSION Stas Sergeev 2 participants 2 messages Jan 14, 2005

lore
Share & tools
lore
#0 lore raw

Hello.

Quoted 3 lines · Mark Mitchell

From the looks of the documentation the NIC should work but I was wondering if dosemu will be able to have direct PCI access to the channel adapter card. Is that possible?

Dosemu can allow you to access the PCI config space and you can request any additional ports, but the PCI DMA won't work, so most likely your NIC will neither. You should access it via the packet driver instead.

#1 lore raw

Do all PCI devices use DMA or is that devices specific?
Your right about the packet driver, that should work but if my PCI Channel card uses DMA I'm pretty much screwed right?

- Mark

Quoted 20 lines · Stas Sergeev

Hello.

Quoted 3 lines · Mark Mitchell

From the looks of the documentation the NIC should work but I was wondering if dosemu will be able to have direct PCI access to the channel adapter card. Is that possible?

Dosemu can allow you to access the PCI
config space and you can request any
additional ports, but the PCI DMA won't
work, so most likely your NIC will neither.
You should access it via the packet driver
instead.

-
To unsubscribe from this list: send the line "unsubscribe linux-msdos" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html