Skip to contentSkip to conversation

crosscompiling and

DISCUSSION Tom Vrána 2 participants 4 messages Jan 15, 2005 MIPS

lore
Share & tools
lore

Tom Vrána

author
#0 lore raw

Hi,

I'm just hopelesly stuck, trying to make a kernel 2.4.27 for mips SoC ADM5120 (MIPS 4Kc). I have the code in a 2.4.18 kernel that I'm able to compile. With the code merged in 2.4.27 most of the stuff works, but I get the following assembler errors. Like if it doesn't recognize what's C and what assembler code ? I am using gcc3.3 toolchain built with uclibc with 2.4.27 kernel headers. and I do appreciate any help....

Tom

mipsel-linux-uclibc-gcc -D__KERNEL__ -I/store/devel/adm/linux-2.4.27-mipscvs-20050114/include -c -o mipsIRQ.o mipsIRQ.S /store/devel/adm/linux-2.4.27-mipscvs-20050114/include/asm/mipsregs.h: Assembler messages:
/store/devel/adm/linux-2.4.27-mipscvs-20050114/include/asm/mipsregs.h:875: Error: unrecognized opcode static inline void tlb_probe(void)' /store/devel/adm/linux-2.4.27-mipscvs-20050114/include/asm/mipsregs.h:876: Warning: rest of line ignored; first ignored character is {' /store/devel/adm/linux-2.4.27-mipscvs-20050114/include/asm/mipsregs.h:877: Error: unrecognized opcode do {}while(0)' /store/devel/adm/linux-2.4.27-mipscvs-20050114/include/asm/mipsregs.h:878: Error: unrecognized opcode __asm__ __volatile__(' /store/devel/adm/linux-2.4.27-mipscvs-20050114/include/asm/mipsregs.h:879: Warning: rest of line ignored; first ignored character is "' /store/devel/adm/linux-2.4.27-mipscvs-20050114/include/asm/mipsregs.h:880: Warning: rest of line ignored; first ignored character is "' /store/devel/adm/linux-2.4.27-mipscvs-20050114/include/asm/mipsregs.h:881: Warning: rest of line ignored; first ignored character is "' /store/devel/adm/linux-2.4.27-mipscvs-20050114/include/asm/mipsregs.h:882: Error: unrecognized opcode do {}while(0)' /store/devel/adm/linux-2.4.27-mipscvs-20050114/include/asm/mipsregs.h:883: Warning: rest of line ignored; first ignored character is }' /store/devel/adm/linux-2.4.27-mipscvs-20050114/include/asm/mipsregs.h:885: Error: unrecognized opcode static inline void tlb_read(void)' /store/devel/adm/linux-2.4.27-mipscvs-20050114/include/asm/mipsregs.h:886: Warning: rest of line ignored; first ignored character is {' /store/devel/adm/linux-2.4.27-mipscvs-20050114/include/asm/mipsregs.h:887: Error: unrecognized opcode do {}while(0)' /store/devel/adm/linux-2.4.27-mipscvs-20050114/include/asm/mipsregs.h:888: Error: unrecognized opcode __asm__ __volatile__(' /store/devel/adm/linux-2.4.27-mipscvs-20050114/include/asm/mipsregs.h:889: Warning: rest of line ignored; first ignored character is "' /store/devel/adm/linux-2.4.27-mipscvs-20050114/include/asm/mipsregs.h:890: Warning: rest of line ignored; first ignored character is "' /store/devel/adm/linux-2.4.27-mipscvs-20050114/include/asm/mipsregs.h:891: Warning: rest of line ignored; first ignored character is "' ---- SNIP ---- (few hundred more complaints from other included header files)

Signature · 5 lines
Tomas Vrana  <[email protected]>
--------------------------
VODA IT consulting, Borkovany 48, 691 75
http://www.voda.cz/
phone: +420 519 419 416 mobile: +420 603 469 305 UIN: 105142752
#1 lore raw
Quoted 9 lines · Tom Vrána

Hi,

I'm just hopelesly stuck, trying to make a kernel 2.4.27 for mips SoC ADM5120 (MIPS 4Kc). I have the code in a 2.4.18 kernel that I'm able to compile. With the code merged in 2.4.27 most of the stuff works, but I get the following assembler errors. Like if it doesn't recognize what's C and what assembler code ? I am using gcc3.3 toolchain built with uclibc with 2.4.27 kernel headers. and I do appreciate any help....

Quoted 6 lines

Tom

mipsel-linux-uclibc-gcc -D__KERNEL__ -I/store/devel/adm/linux-2.4.27-mipscvs-20050114/include -c -o mipsIRQ.o mipsIRQ.S

It fails to add -D__ASSEMBLY__ for some reason. I guess the cause is some broken Makefile in your tree.

Thiemo

author
#2 lore raw

Re: crosscompiling and ...

Quoted 16 lines · Thiemo Seufer
Quoted 12 lines · Tom Vrána

Hi,

I'm just hopelesly stuck, trying to make a kernel 2.4.27 for mips SoC ADM5120 (MIPS 4Kc). I have the code in a 2.4.18 kernel that I'm able to compile. With the code merged in 2.4.27 most of the stuff works, but I get the following assembler errors. Like if it doesn't recognize what's C and what assembler code ? I am using gcc3.3 toolchain built with uclibc with 2.4.27 kernel headers. and I do appreciate any help....

Tom

mipsel-linux-uclibc-gcc -D__KERNEL__ -I/store/devel/adm/linux-2.4.27-mipscvs-20050114/include -c -o mipsIRQ.o mipsIRQ.S

Quoted 7 lines

It fails to add -D__ASSEMBLY__ for some reason. I guess the cause is some broken Makefile in your tree.

Thiemo

Thanks, your guess is right ;-) I got that one one fixed. What I got now is a complaint:

mipsIRQ.S: Assembler messages:
mipsIRQ.S:116: Error: absolute expression required li' mipsIRQ.S:120: Error: absolute expression required and' mipsIRQ.S:127: Error: absolute expression required `and'

the trouble causing code is this (STATUS_IE) :

LEAF(mips_int_lock)
.set noreorder
mfc0 v0, CP0_STATUS
li v1, ~STATUS_IE
and v1, v1, v0
mtc0 v1, CP0_STATUS
j ra
and v0, v0, STATUS_IE
.set reorder
END(mips_int_lock)

LEAF(mips_int_unlock)
mfc0 v0, CP0_STATUS
and a0, a0, STATUS_IE
or v0, v0, a0
mtc0 v0, CP0_STATUS
j ra
nop
END(mips_int_unlock)

Any hints here ?

Signature · 5 lines
Tomas Vrana  <[email protected]>
--------------------------
VODA IT consulting, Borkovany 48, 691 75
http://www.voda.cz/
phone: +420 519 419 416 mobile: +420 603 469 305 UIN: 105142752
#3 lore raw

Re: crosscompiling and ...

Tom Vrána wrote:
[snip]

Quoted 8 lines

Thanks, your guess is right ;-) I got that one one fixed. What I got now is a complaint:

mipsIRQ.S: Assembler messages:
mipsIRQ.S:116: Error: absolute expression required li' mipsIRQ.S:120: Error: absolute expression required and' mipsIRQ.S:127: Error: absolute expression required `and'

Quoted 6 lines

the trouble causing code is this (STATUS_IE) :

LEAF(mips_int_lock)
.set noreorder
mfc0 v0, CP0_STATUS
li v1, ~STATUS_IE

STATUS_IE isn't visible for the preprocessor, which means the assembler sees a symbol named "status_ie" instead of an immediate constant.

Thiemo