Installing Bluez
Hello everyone
I've to install bluez on an arm system with a 2.6.7 kernel.
So I've to activate bluez in the kernel, install bluez-libs and bluez-utils.
How to activate bluez support in the kernel?
Is it enough to select (make menuconfig):
Networking Support -> Bluetooth subsystem support
USB Support -> USB Bluetooth TTY support
Or do I have to apply a patch from bluez.org/patches.html? Is it possible to leave the kernel as it is and make a module for bluez?
Will there be any problems to compile the libs and utils on an arm processor?
kind regards
Marco Trudel
-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting Tool for open source databases. Create drag-&-drop reports. Save time by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Marcel Holtmann
maintainerHi Marco,
Quoted 7 lines
I've to install bluez on an arm system with a 2.6.7 kernel.
So I've to activate bluez in the kernel, install bluez-libs and bluez-utils.How to activate bluez support in the kernel?
Is it enough to select (make menuconfig):
Networking Support -> Bluetooth subsystem support
USB Support -> USB Bluetooth TTY support
you can't select both drivers. Read the help text of the config entries.
Quoted 1 line
Or do I have to apply a patch from bluez.org/patches.html?
You should use 2.6.10 and apply that patch. The patch for 2.6.7 is outdated.
Quoted 1 line
Is it possible to leave the kernel as it is and make a module for bluez?
It is possible, but not supported.
Quoted 1 line
Will there be any problems to compile the libs and utils on an arm processor?
Not that I know of, but I don't have a ARM platform for testing.
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting Tool for open source databases. Create drag-&-drop reports. Save time by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Hello Marcel
Quoted 12 lines · Marcel Holtmann
Hi Marco,
Quoted 7 lines
I've to install bluez on an arm system with a 2.6.7 kernel.
So I've to activate bluez in the kernel, install bluez-libs and bluez-utils.How to activate bluez support in the kernel?
Is it enough to select (make menuconfig):
Networking Support -> Bluetooth subsystem support
USB Support -> USB Bluetooth TTY support
Quoted 8 lines
you can't select both drivers. Read the help text of the config entries.
Quoted 1 line
Or do I have to apply a patch from bluez.org/patches.html?
You should use 2.6.10 and apply that patch. The patch for 2.6.7 is outdated.
Ok. I'll use the patch. (It's easier anyway :-))
Can I apply the 2.6.10 patch to my 2.6.7 kernel? Or do I have to use the 2.6.10 kernel?
Quoted 10 lines
Quoted 1 line
Is it possible to leave the kernel as it is and make a module for bluez?
It is possible, but not supported.
Quoted 1 line
Will there be any problems to compile the libs and utils on an arm processor?
Not that I know of, but I don't have a ARM platform for testing.
I'll inform you as soon as i'm that far...
kind regards
Marco
Quoted 7 lines
Regards
Marcel
Quoted 11 lines
-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting Tool for open source databases. Create drag-&-drop reports. Save time by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting Tool for open source databases. Create drag-&-drop reports. Save time by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Marcel Holtmann
maintainerHi Marco,
Quoted 6 lines
Quoted 2 lines
You should use 2.6.10 and apply that patch. The patch for 2.6.7 is outdated.
Ok. I'll use the patch. (It's easier anyway :-))
Can I apply the 2.6.10 patch to my 2.6.7 kernel? Or do I have to use the 2.6.10 kernel?
it is named patch-2.6.10-mh2. So what do you think ;)
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting Tool for open source databases. Create drag-&-drop reports. Save time by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Hello Marcel
I expect it to pe for the 2.6.10 Kernel and hope that it's usuable with the 2.6.7 one... How bad is the 2.6.7 patch? Wher can I download it?
kind regards
Marco
Quoted 19 lines · Marcel Holtmann
Hi Marco,
Quoted 5 lines
Quoted 2 lines
You should use 2.6.10 and apply that patch. The patch for 2.6.7 is outdated.
Ok. I'll use the patch. (It's easier anyway :-))
Can I apply the 2.6.10 patch to my 2.6.7 kernel? Or do I have to use the 2.6.10 kernel?it is named patch-2.6.10-mh2. So what do you think ;)
Regards
Marcel
Quoted 11 lines
-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting Tool for open source databases. Create drag-&-drop reports. Save time by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting Tool for open source databases. Create drag-&-drop reports. Save time by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Marcel Holtmann
maintainerHi Marco,
Quoted 3 lines
I expect it to pe for the 2.6.10 Kernel and hope that it's usuable with the 2.6.7 one...
How bad is the 2.6.7 patch? Wher can I download it?
the latest 2.6.7 patch includes almost the same of the Bluetooth subsystem that is in 2.6.8. So you miss the patches for two kernel releases and actually I counted them. There are 33 patches between the 2.6.7 and 2.6.10 kernel. The ones from the patch-2.6.10-mh2 are not included in this count.
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting Tool for open source databases. Create drag-&-drop reports. Save time by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
[Bluez-users] Workaround for the bug in gnu arm linker while using sdpd program
In reply to Marco TrudelSGksDQoNCldoZW4gYW55b25lIHJ1bnMgInNkcGQiIGluIGFybS1iYXNlZCBwbGF0Zm9ybSwgdGhl IHByb2Nlc3Mgd2lsbCBkaWVzIGltbWVkaWF0ZWx5Lg0KSXQgaXMgYmVjYXVzZSB0aGUgY3Jvc3Mt Y29tcGlsZXIgcHJvYmxlbSAobWF5YmUgZHVlIHRvIHRoZSBvbmUgcGF0aCBsaW5raW5nIG9mIHRo ZSBsaW5rZXIpLg0KVG8gc29sdmUgdGhlIHByb2JsZW0sIG1vdmUgdGhlICJzZHBfYXR0cmlkX2Nv bXBfZnVuYyIgaW4gdGhlIHNkcC5jIChibHVlemxpYikgb24gdGhlIHRvcCBvZiB0aGUgZmlsZS4N Ck9XLiB0aGUgc2ltYm9sIHdpbGwgYmUgbGlua2VkIGF0IDAgYWRkcmVzcywgYW5kIGdvdCBhIHNl Z21lbnRhdGlvbiBmYXVsdCENCg0KSGVlanVuZQ0K
-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting Tool for open source databases. Create drag-&-drop reports. Save time by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Marcel Holtmann
maintainerRe: [Bluez-users] Workaround for the bug in gnu arm linker while using sdpd program
Hi Heejune,
Quoted 4 lines
When anyone runs "sdpd" in arm-based platform, the process will dies immediately.
It is because the cross-compiler problem (maybe due to the one path linking of the linker). To solve the problem, move the "sdp_attrid_comp_func" in thesdp.c(bluezlib) on the top of the file. OW. the simbol will be linked at 0 address, and got a segmentation fault!
what about a patch in unified diff format?
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting Tool for open source databases. Create drag-&-drop reports. Save time by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users