Skip to contentSkip to conversation

2.4.29: strange behaviour system clock

DISCUSSION Mario Vanoni 2 participants 2 messages Jan 30, 2005

lore
Share & tools
lore
#0 lore raw

the same with
2.4.29-rc[123]
2.4.28-lck1
2.4.23-aa3
every time repeatable

UP P4-3400HT, 2GB mem, no swap IDE NEC DVD-RW ND-3500AG (dev/sr0)

DVD with 48 files (*.tar.bz2), 4.4GB

ntpdate -b swisstime.ethz.ch: offset 0.0... time dircmp /mnt/cdrom /source thinks it used 20 minutes, no errors ntpdate -b ...: offset 1134 sec !!!

SMP dual P3-550, 1GB mem, no swap
SCSI PIONER DVD-ROM DVD-304 (slot-in, /dev/sr0)

same DVD, identical source (copied)

ntpdate -b ...: offset 0.0... time dircmp /mnt/cdrom /source thinks it used 12 minutes, no errors ntpdate -b ...: 0.020522 sec

SMP dual Xeon-2800HT, 2GB mem, no swap IDE NEC DVD-RW ND-2501A (/dev/sr0)

same deviation, offset tons of seconds this is the production, time must remain correct

Burning CD/DVD with IDE burners, there not exist SCSI burners, similar retards of the system clock. CD using cdrecord, DVD growisofs.

Doing hwclock --show, time is always correct.

Not in LKML, cc if you need, and ... thanks

Mario

PS We burn DVD only since 2 weeks,
before only CD and only on the SCSI machine, and ... NO PROBLEM.

#1 lore raw

Hi,

I have also seen such offsets on some boxes running at EADS (a Compaq Proliant [<-- this one has a very small offset] and a no name machine [<-- this one is terrible in 10 minutes 2-3 minutes too fast]). I have no numbers at the moment. If you need some more information please contact me.

I tried to fix this issue also, but haven't found any solution. Both servers are running SuSE Linux I think on 8.x (2.4 kernel). I don't know at the moment if we tried already an update to 2.6 kernel.

For the moment our fix is a 10 minute cronjob which execute hwclock --hctosys
because hardware clock is running correct.

A fix or a hint whats wrong would be very nice :-).

Cheers,
Michael Obster
---
mailto:[email protected]
http://www.obster.org

Quoted 47 lines · Mario Vanoni

the same with
2.4.29-rc[123]
2.4.28-lck1
2.4.23-aa3
every time repeatable

UP P4-3400HT, 2GB mem, no swap IDE NEC DVD-RW ND-3500AG (dev/sr0)

DVD with 48 files (*.tar.bz2), 4.4GB

ntpdate -b swisstime.ethz.ch: offset 0.0... time dircmp /mnt/cdrom /source thinks it used 20 minutes, no errors ntpdate -b ...: offset 1134 sec !!!

SMP dual P3-550, 1GB mem, no swap
SCSI PIONER DVD-ROM DVD-304 (slot-in, /dev/sr0)

same DVD, identical source (copied)

ntpdate -b ...: offset 0.0... time dircmp /mnt/cdrom /source thinks it used 12 minutes, no errors ntpdate -b ...: 0.020522 sec

SMP dual Xeon-2800HT, 2GB mem, no swap IDE NEC DVD-RW ND-2501A (/dev/sr0)

same deviation, offset tons of seconds this is the production, time must remain correct

Burning CD/DVD with IDE burners, there not exist SCSI burners, similar retards of the system clock. CD using cdrecord, DVD growisofs.

Doing hwclock --show, time is always correct.

Not in LKML, cc if you need, and ... thanks

Mario

PS We burn DVD only since 2 weeks,
before only CD and only on the SCSI machine, and ... NO PROBLEM.