Skip to contentSkip to conversation

My System doesn't use swap!

DISCUSSION Matthias-Christian Ott 8 participants 9 messages Jan 31, 2005 – Feb 1, 2005

lore
Share & tools
lore
#0 lore raw

Hi!
I have mysterious Problem:
90 % of my Ram are used (340 MB), but 0 Byte of my Swap (2GB) is used and about about 150 MB are swappable.

[matthias-christian@iceowl ~]$ free
total used free shared buffers cached
Mem: 383868 362176 21692 0 12 208956
-/+ buffers/cache: 153208 230660
Swap: 2097136 0 2097136

[matthias-christian@iceowl ~]$ cat /kernel-2.6.10-rc2-ott/config [..]
CONFIG_SWAP=y
[..]
CONFIG_X86_BSWAP=y
[..]

[matthias-christian@iceowl ~]$ dmesg
[..]
Adding 2097136k swap on /dev/discs/disc0/part2. Priority:-1 extents:1 [..]

Matthias-Christian Ott

#1 lore raw

Quoting Matthias-Christian Ott <[email protected]>:

Quoted 9 lines

Hi!
I have mysterious Problem:
90 % of my Ram are used (340 MB), but 0 Byte of my Swap (2GB) is used and about about 150 MB are swappable.

[matthias-christian@iceowl ~]$ free
total used free shared buffers cached
Mem: 383868 362176 21692 0 12 208956
-/+ buffers/cache: 153208 230660

                                    ^^^^^^

You have ~230M of 380M free.
Nothing mysterious here.

Quoted 24 lines

Swap: 2097136 0 2097136

[matthias-christian@iceowl ~]$ cat /kernel-2.6.10-rc2-ott/config [..]
CONFIG_SWAP=y
[..]
CONFIG_X86_BSWAP=y
[..]

[matthias-christian@iceowl ~]$ dmesg
[..]
Adding 2097136k swap on /dev/discs/disc0/part2. Priority:-1 extents:1 [..]

Matthias-Christian Ott

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Signature · 1 line
Regards Michael Buesch  [ http://www.tuxsoft.de.vu ]
#2 lore raw
Quoted 13 lines · Michael Buesch

Quoting Matthias-Christian Ott <[email protected]>:

Quoted 10 lines

Hi!
I have mysterious Problem:
90 % of my Ram are used (340 MB), but 0 Byte of my Swap (2GB) is used and about about 150 MB are swappable.

[matthias-christian@iceowl ~]$ free
total used free shared buffers cached
Mem: 383868 362176 21692 0 12 208956
-/+ buffers/cache: 153208 230660

Quoted 35 lines
                                   ^^^^^^

You have ~230M of 380M free.
Nothing mysterious here.

Quoted 26 lines

Swap: 2097136 0 2097136

[matthias-christian@iceowl ~]$ cat /kernel-2.6.10-rc2-ott/config [..]
CONFIG_SWAP=y
[..]
CONFIG_X86_BSWAP=y
[..]

[matthias-christian@iceowl ~]$ dmesg
[..]
Adding 2097136k swap on /dev/discs/disc0/part2. Priority:-1 extents:1 [..]

Matthias-Christian Ott

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Ok maybe I wasn't able to read the /free/ output correctly, but why is no swap used (more than 60% ram are used)?

Matthias-Christian Ott

#3 lore raw
Quoted 16 lines · Matthias-Christian Ott
Quoted 14 lines · Michael Buesch

Quoting Matthias-Christian Ott <[email protected]>:

Quoted 11 lines

Hi!
I have mysterious Problem:
90 % of my Ram are used (340 MB), but 0 Byte of my Swap (2GB) is used and about about 150 MB are swappable.

[matthias-christian@iceowl ~]$ free

           total       used       free     shared    buffers     cached
Mem:        383868     362176      21692          0         12     208956
-/+ buffers/cache:     153208     230660
Quoted 7 lines
Quoted 5 lines
                                  ^^^^^^

You have ~230M of 380M free.
Nothing mysterious here.

Ok maybe I wasn't able to read the /free/ output correctly, but why is no swap used (more than 60% ram are used)?

Why would you want to use swap when you still have free RAM? The kernel isn't using swap because there is no need to.

Benno

#4 lore raw
Quoted 6 lines · Benno
Quoted 2 lines · Matthias-Christian Ott

Ok maybe I wasn't able to read the /free/ output correctly, but why is no swap used (more than 60% ram are used)?

Why would you want to use swap when you still have free RAM? The kernel isn't using swap because there is no need to.

2004 common VM thread: Why is my swap being used, I still have free RAM? 2005 common VM thread: Why is my swap not being used, I only have some free RAM?

Guess Linux is getting something right -- we can't please anyone!!!

-Rahul

#5 lore raw
In reply to Matthias-Christian Ott

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Quoted 11 lines
Quoted 10 lines · Michael Buesch

Quoting Matthias-Christian Ott <[email protected]>:

Quoted 9 lines

Hi!
I have mysterious Problem:
90 % of my Ram are used (340 MB), but 0 Byte of my Swap (2GB) is used and about about 150 MB are swappable.

[matthias-christian@iceowl ~]$ free
total used free shared buffers cached
Mem: 383868 362176 21692 0 12 208956
-/+ buffers/cache: 153208 230660

Note that ~200MB are being used for disk caching.
If your system need to allocate more ram, the disk cache will reduce before swap is used.

Mark.

- --
Mark Watts
Senior Systems Engineer
QinetiQ Trusted Information Management Trusted Solutions and Services group
GPG Public Key ID: 455420ED

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)

iD8DBQFB/iVyBn4EFUVUIO0RAmRBAJ46Vk2Z69/i+bMrj1gbSF8obHgEkgCgw8iU NgRDBYk+YoiRuWZZ2gFT8NE=
=R02H
-----END PGP SIGNATURE-----

#6 lore raw
In reply to Matthias-Christian Ott
Quoted 2 lines · Matthias-Christian Ott

Ok maybe I wasn't able to read the /free/ output correctly, but why is no swap used (more than 60% ram are used)?

Swap is orders of magnitude slower than RAM. Why put things there if you still have RAM left? The kernel only puts things in swap when it has no more RAM _and_ has already deleted big chunks of its disk cache.

Cheers,
Kyle Moffett

-----BEGIN GEEK CODE BLOCK-----
Version: 3.12
GCM/CS/IT/U d- s++: a18 C++++>$ UB/L/X/*++++(+)>$ P+++(++++)>$ L++++(+++) E W++(+) N+++(++) o? K? w--- O? M++ V? PS+() PE+(-) Y+ PGP+++ t+(+++) 5 X R? tv-(--) b++++(++) DI+ D+ G e->++++$ h!*()>++$ r !y?(-) ------END GEEK CODE BLOCK------

#7 lore raw
Quoted 9 lines · Kyle Moffett
Quoted 2 lines · Matthias-Christian Ott

Ok maybe I wasn't able to read the /free/ output correctly, but why is no swap used (more than 60% ram are used)?

Swap is orders of magnitude slower than RAM. Why put things there if you still have RAM left? The kernel only puts things in swap when it has no more RAM _and_ has already deleted big chunks of its disk cache.

Unless he just booted, I would expect at least a little use of the swap, something like this, on a machine with 1GB RAM and not much happening. It's burning in with setiathome, and I played a few mp3s, and it seemed to feel the need for swap. I see similar on a box with 4GB, it never comes close to low memory, but still uses a few MB swap.

pixels:davidsen> free
total used free shared buffers cached
Mem: 1035228 996712 38516 0 175100 67932
-/+ buffers/cache: 553680 481548
Swap: 2048248 11292 2036956
pixels:davidsen> uname -rn
pixels.tmr.com 2.6.10-ac2

Not that this is a bad thing, but I'm surprised at no swap used at all.

Signature · 3 lines
   -bill davidsen ([email protected])
"The secret to procrastination is to put things off until the
 last possible moment - but no longer"  -me
#8 lore raw

Hi Bill :)

* Bill Davidsen <[email protected]> dixit:

Quoted 5 lines
Quoted 3 lines

Swap is orders of magnitude slower than RAM. Why put things there if you still have RAM left? The kernel only puts things in swap when it has no more RAM _and_ has already deleted big chunks of its disk cache.

Unless he just booted, I would expect at least a little use of the swap, something like this, on a machine with 1GB RAM and not much happening.

I have 2.4.29 running and uptime is about 24 hours now, and with
1Gig of RAM and a loadavg in the last 15 minutes has been 4, more or less, and I have 130 megs of free memory and none of my 512 megs swap is used. And this is very common for me. The only way of using swap is starting X, mozilla (some pre-firefox version will do) and one of the many memory leaking apps available for the X Window System. On console, with the apps I run usually (that includes setiathome too, and heavy use of the C compiler) I don't hit swap. This is my memory status right now:

total: used: free: shared: buffers: cached:

Mem:  927006720 796491776 130514944        0  5517312 738082816
Swap: 536862720         0 536862720
MemTotal:       905280 kB
MemFree:        127456 kB
MemShared:           0 kB
Buffers:          5388 kB
Cached:         720784 kB
SwapCached:          0 kB
Active:           7096 kB
Inactive:       719092 kB
HighTotal:           0 kB
HighFree:            0 kB
LowTotal:       905280 kB
LowFree:        127456 kB
SwapTotal:      524280 kB
SwapFree:       524280 kB

Pretty low usage, and still more than 700MB of cached memory
available to avoid using swap.

Raúl Núñez de Arenas Coronado

Signature · 3 lines
Linux Registered User 88736
http://www.dervishd.net & http://www.pleyades.net/
It's my PC and I'll cry if I want to...