wired/wireless bridge: a more surefire Linux wireless solution?
This question is not really Linux-specific, and is maybe more hardware-oriented than OS-oriented. But being a Linux user, I'd like to know if/how it might apply to me. It concerns a comment I read regarding an article on wireless networking with Linux, and it's really something I had earlier wondered about, though in less specific terms. So, to go on with my query.
It seems widely accepted that Linux has spotty support for wireless networking--at least I read articles and comments to that effect with some regularity. I wondered, when I first confronted these sorts of problems:
"why couldn't a wireless receiver-type-thing just be hooked up to a Linux machine's wired NIC to connect said machine to a wireless network?" I didn't really appreciate the technical aspects involved when I first thought of this, but now that I've read someone's suggestion about using a bridge to do just this sort of thing, I might understand better. The person responding to the article I was reading was basically saying something like: "why bother with the software problems (lack of drivers and documentation on chipsets to write them) associated with hooking to a wireless network in Linux? Just get a wireless bridge and hook it to your wired NIC and get on the wireless network that way."
So, let me just ask: is this really some sort of solution to the wireless support problem under Linux? People objected to that poster's suggestion on the basis that it was too bulky (extra pieces of hardware like the bridge and its power adaptor). Maybe it's a bit more expensive, too. But if this really would work--i.e., allow you to connect to a wireless network through your existing wired NIC--it could be a solution for at least some situations. Possible cons would be that a lousy old 10/100 wired NIC can't match the throughput of the latest 801.11g wireless NIC's (to which I say; big whoop! 100mbps suits my all my needs and more). Certainly an enterprising hardware manufacturer could address the bulkiness problem: I have an external HD, for example, that draws 6 volt power from the ps2 port. Of course the possibility always exists--and is in fact quite likely--that there's already some device that does this, i.e., sort of augments your existing wired NIC with wirless capability and that I simply haven't run across it yet.
Feedback will be appreciated. I've probably overlooked or poorly understand many of the technical details.
James
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
Quoted 40 lines · James Miller
This question is not really Linux-specific, and is maybe more hardware-oriented than OS-oriented. But being a Linux user, I'd like to know if/how it might apply to me. It concerns a comment I read regarding an article on wireless networking with Linux, and it's really something I had earlier wondered about, though in less specific terms. So, to go on with my query.
It seems widely accepted that Linux has spotty support for wireless networking--at least I read articles and comments to that effect with some regularity. I wondered, when I first confronted these sorts of problems:
"why couldn't a wireless receiver-type-thing just be hooked up to a Linux machine's wired NIC to connect said machine to a wireless network?" I didn't really appreciate the technical aspects involved when I first thought of this, but now that I've read someone's suggestion about using a bridge to do just this sort of thing, I might understand better. The person responding to the article I was reading was basically saying something like: "why bother with the software problems (lack of drivers and documentation on chipsets to write them) associated with hooking to a wireless network in Linux? Just get a wireless bridge and hook it to your wired NIC and get on the wireless network that way."So, let me just ask: is this really some sort of solution to the wireless support problem under Linux? People objected to that poster's suggestion on the basis that it was too bulky (extra pieces of hardware like the bridge and its power adaptor). Maybe it's a bit more expensive, too. But if this really would work--i.e., allow you to connect to a wireless network through your existing wired NIC--it could be a solution for at least some situations. Possible cons would be that a lousy old 10/100 wired NIC can't match the throughput of the latest 801.11g wireless NIC's (to which I say; big whoop! 100mbps suits my all my needs and more). Certainly an enterprising hardware manufacturer could address the bulkiness problem: I have an external HD, for example, that draws 6 volt power from the ps2 port. Of course the possibility always exists--and is in fact quite likely--that there's already some device that does this, i.e., sort of augments your existing wired NIC with wirless capability and that I simply haven't run across it yet.
Feedback will be appreciated. I've probably overlooked or poorly understand many of the technical details.
Quoted 9 lines
James
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
Gang,
I use one in my room at my camp where I stay while I work. They wired
the camp with Cisco wireless AP's. I use a Linksys ethernet to wireless bridge and it works fine. I had a Dlink but it gave me lots of problems. If you have more questions just ask. Dave
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
Quoted 4 lines · dave
I use one in my room at my camp where I stay while I work. They wired
the camp with Cisco wireless AP's. I use a Linksys ethernet to wireless bridge and it works fine. I had a Dlink but it gave me lots of problems. If you have more questions just ask.
Thanks for your input, Dave. So it does work as the poster whose comments I read suggested. I suppose one must be particular about the bridge one
buys: looks like Linksys should be chosen over Dlink, at the least. Anyone else tried this, and can can you report on hardware?
After I finished my initial post, I realized I had forgotten to mention those wireless print server adaptors and to ask whether these might have capabilities to allow using a wired NIC as wireless. I guess they be geared toward listening on a certain port, so that could interfere. But they must be capable of broadcasting to dhcp servers for an adress, and be capable of transferring data into and out of the printer's ethernet port--for those printer's that have one.
James
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
Quoted 4 lines · James Miller
So, let me just ask: is this really some sort of solution to the wireless support problem under Linux? People objected to that poster's suggestion on the basis that it was too bulky (extra pieces of hardware like the bridge and its power adaptor). Maybe it's a bit more expensive, too.
Looking around at prices, wired/wireless bridges do seem a bit more expensive than traditional wireless cards. I see prices starting at around $35 for these, while wireless NIC's can be had on sale for as low as $10 (after rebates!). But what good is an unsupported $10 wirless NIC going to be, anyway? I note in advertisements that these bridges are expressly described as allowing computers to connect to wireless LANs (along with set-top boxes, gaming consoles etc etc), and many even claim Linux support. This looks to me like a good alternative to suggest to Linux newbies interested in using wireless networks--i.e., for those who haven't bought an already-wireless-enabled machine and are simply trying to get the built-in wireless hardware to work under Linux.
James
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
Quoted 7 lines · James Miller
Quoted 4 lines · James Miller
So, let me just ask: is this really some sort of solution to the wireless support problem under Linux? People objected to that poster's suggestion on the basis that it was too bulky (extra pieces of hardware like the bridge and its power adaptor). Maybe it's a bit more expensive, too.
Quoted 11 lines
Looking around at prices, wired/wireless bridges do seem a bit more expensive than traditional wireless cards. I see prices starting at around $35 for these, while wireless NIC's can be had on sale for as low as $10 (after rebates!). But what good is an unsupported $10 wirless NIC going to be, anyway? I note in advertisements that these bridges are expressly described as allowing computers to connect to wireless LANs (along with set-top boxes, gaming consoles etc etc), and many even claim Linux support. This looks to me like a good alternative to suggest to Linux newbies interested in using wireless networks--i.e., for those who haven't bought an already-wireless-enabled machine and are simply trying to get the built-in wireless hardware to work under Linux.
James -- You are right that a $35 bridge that works is a better buy than a $10 card that does not work. And I've even seen these bridges as low as $20 (after rebates) from time to time (this due to my proximity to Fry's Electronics; I never see deals that good online.
One thing people haven't mentioned here, though, is the NDIS-wrapper approach. This uses some wrapper code to let the kernel operate a WLAN card using its Windows driver software. I forget the URL, but if you Google, "NDIS Linux", you'll probably find it. And my son, who (unlike me) has a WLAN running at his home, says his recent experience is that the technique works well, except for dual-CPU systems, where (I think this is what he said) it can lead to a race condition.
Signature · 10 lines
No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.300 / Virus Database: 265.8.5 - Release Date: 2/3/2005 - To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.linux-learn.org/faqs