U-Boot support for MPC8270
At what stage right now support for MPC8270 in U-Boot.
Based on this we are thinking whether buy or not eval board, or try to get system running already on a target. Can anybody suggest.
Thank you
Hi,
I have a custom board with mpc8270vr runing uboot 1.1.2 and it works without any problem. If you follow Denx instructions it's very easy to get it runing.
Right now Linux 2.6.10 is runing on the board.
The only problem with the MPC8270 we had was that VCORE has to be 1.7V not 1.5V ,
/Hans
Quoted 10 lines · Dmytro Bablinyuk
At what stage right now support for MPC8270 in U-Boot. Based on this we are thinking whether buy or not eval board, or try to get system running already on a target.
Can anybody suggest.Thank you
_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
Quoted 4 lines · Dmytro Bablinyuk
At what stage right now support for MPC8270 in U-Boot. Based on this we are thinking whether buy or not eval board, or try to get system running already on a target.
Can anybody suggest.
You are confusing this list with U-Boot list where this post belongs.
-Matt
My apologise.
Quoted 4 lines
You are confusing this list with U-Boot list where this post belongs.
-Matt
Signature · 3 lines
No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.300 / Virus Database: 265.8.4 - Release Date: 1/02/05