Skip to contentSkip to conversation

DVD-RW writes but doesn't read

DISCUSSION Samuel Torres 1 participant 1 message Feb 4, 2005

lore
Share & tools
lore
#0 lore raw

Just a few days ago I installed a brand new OEM AOpen DUW1608/ARR. At times while mounting DVDs the drive would lose files between ls's, or get I/O errors while ls'ing. I also noticed the same errors you posted below. I might have stumbled across a solution to this problem. In my BIOS I changed all of the AUTO's in the CD/DVD drive properties and set them to CD/DVD (drive type), PIO-4 (PIO MODE), and DMA-4 (DMA MODE). This change had an apparent effect which no longer produces such reading errors, at least from the 4 reading tests (2 DVD and 2 CD). The 2 DVD reads were done with vobcopy, and the CD tests were done with cdrdao, and md5sum (checking the Ubuntu files with the CD with the provided md5sum.txt, from within the CD, in the DVD drive).

Hope it works.

Quoted 18 lines · you

Hi Jens et al

I have a laptop DVD-RW that is working fine when burning but has endless streams of errors with any kernel I try when trying to read anything (cd/dvd audio/video/data).

hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x50
ide: failed opcode was 100
end_request: I/O error, dev hdc, sector 571832
Buffer I/O error on device hdc, logical block 71479

If I'm persistent I can read the data off the drive but I'll probably kill the drive in the process. It doesn't matter what iosched I use but I use cfq by default. I've tried disabling dma and so on without success. Any ideas?

Con