port forwarding partially working
Hello again
I am having trouble forwarding ports to internal servers.
There is a server in the LAN at $SERV_BIBL running on Windows NT4 and the port forwarding lines
$IPTABLES -A FORWARD -i $PUB_IF -p tcp --dport 1024 -j ACCEPT
$IPTABLES -t nat -A PREROUTING -i $PUB_IF -p tcp --dport 1024 -j DNAT --to $SERV_BIBL:110
works ok when I telnet $PUB_IF 1024. I got redirected to the POP server with no problems.
The problem is when I try to forward port any other port (including 1024) to the same server on ports 25 or 21 (ftp access too). The lines I added to my iptables scripts are the same as above changing 1024 to 1025 and 110 to the service port (25 or 21).
Mail server running is MERCUR SMTP Server (v4.02.07 FTP Server running is WarFTPd 1.81.01
When I telnet internally to the private IP on ports 25 and 21 I have no problems and get the welcome message of the service.
The same thing happens with another internal server running on Mandrake Linux POP works ok but MTA and FTP services are not forwarded on the ports I added Postfix Mail Server and ProFTPD 1.2.5rc1 Server
One last thing
I have a forwarding of port 25 on $PUB_IF to port 25 on my internal POP server with the users accounts and it works ok. Same with POP
Below are the lines I have on my script for this I want to do
# Abro el puerto de smtp para enviar los correos desde unpata hacia a La Gran Bestia POP $IPTABLES -A FORWARD -i $PUB_IF -s $LAN_SMTP -p tcp --dport 25 -j ACCEPT $IPTABLES -t nat -A PREROUTING -i $PUB_IF -p tcp --dport 25 -j DNAT --to $LAN_POP:25
# POP a cuentas unpata.edu.ar y unp.edu.ar
$IPTABLES -A FORWARD -i $PUB_IF -p tcp --dport 110 -j ACCEPT
$IPTABLES -t nat -A PREROUTING -i $PUB_IF -p tcp --dport 110 -j DNAT --to $LAN_POP:110 -------------------------------------So far the forwarding works OK------------------------------------------------------
-------------------------------------From here only forwarding to 110 works-------------------------------------------- # Cuentas biblioteca.unp.edu.ar
$IPTABLES -A FORWARD -i $PUB_IF -p tcp --dport 1024 -j ACCEPT
$IPTABLES -t nat -A PREROUTING -i $PUB_IF -p tcp --dport 1024 -j DNAT --to $SERV_BIBL:110
$IPTABLES -A FORWARD -i $PUB_IF -p tcp --dport 1025 -j ACCEPT
$IPTABLES -t nat -A PREROUTING -i $PUB_IF -p tcp --dport 1025 -j DNAT --to $SERV_BIBL:25
# Cuentas ing.unp.edu.ar
$IPTABLES -A FORWARD -i $PUB_IF -p tcp --dport 1030 -j ACCEPT
$IPTABLES -t nat -A PREROUTING -i $PUB_IF -p tcp --dport 1030 -j DNAT --to $SERV_ING:110
$IPTABLES -A FORWARD -i $PUB_IF -p tcp --dport 1031 -j ACCEPT
$IPTABLES -t nat -A PREROUTING -i $PUB_IF -p tcp --dport 1031 -j DNAT --to $SERV_ING:25
If you need more info just ask
Any help would be greatly appreciated
Thanks in advance
-----------------------------------------------------------------
Raul I. Becette
E-mail: [email protected]
REPAC, Red Patagonica de Comunicaciones
Univ. Nac. de la Patagonia San Juan Bosco
Ciudad Universitaria - Km.4.
9000 - Comodoro Rivadavia - Chubut
Tel/Fax : (0297) - 4550073
------------------------------------------------------------------
Quoted 6 lines · Raul I. Becette
I am having trouble forwarding ports to internal servers. $IPTABLES -A FORWARD -i $PUB_IF -p tcp --dport 1024 -j ACCEPT $IPTABLES -t nat -A PREROUTING -i $PUB_IF -p tcp --dport 1024 -j DNAT --to $SERV_BIBL:110
works ok when I telnet $PUB_IF 1024. I got redirected to the POP server with no problems.
I should not.
If you DNAT your connexion to $PUB_IF port 1024 to $SERV_BIBL:110, then your FORWARD chain will see a packet to destined to port 110, not 1024. If you just look at Netfilter architecture, you will see FORWARD chain traversal occurs _after_ PREROUTING traversal. Thus, packets are already NDATed and have their destination modified when hitting FORWARD rules.
That's why, in order to accept your DNATed connection, you should have :
$IPTABLES -A FORWARD -i $PUB_IF -p tcp --dport 110 -j ACCEPT
If it works anyway, it means you must have some kind of overlaping rule that accidentally accepts thoses packets.
Now, going to your script, there's indeed a rule that accepts destination port 110 whatever their destination is :
$IPTABLES -A FORWARD -i $PUB_IF -p tcp --dport 110 -j ACCEPT
So your stuff works, but that's an accident !
Signature · 2 lines
http://sid.rstack.org/ PGP KeyID: 157E98EE FingerPrint: FA62226DA9E72FA8AECAA240008B480E157E98EE
Quoted 2 lines
Quoted 2 lines
Hi! I'm your friendly neighbourhood signature virus. Copy me to your signature file and help me spread!
A message that is not in the archive (sent off-list or not yet received): [email protected]
remap local addresses
Hi,
Does anybody know how to remap local addresses, if I want to connect two networks via VNP with the same IP space in the private address range?
Thanks
Remus
Re: remap local addresses
Quoted 4 lines · Remus
Hi,
Does anybody know how to remap local addresses, if I want to connect two networks via VNP with the same IP space in the private address range?
use the NETMAP target from POM.
-j
--
"Mmmm...free goo."
--The Simpsons
Re: remap local addresses
Are there any examples how to use the NETMAP?
Remus
----- Original Message ----- From: "Jason Opperisano" <[email protected]>
To: <[email protected]>
Sent: Thursday, February 17, 2005 4:07 PM
Subject: Re: remap local addresses
Quoted 17 lines · Remus
Quoted 4 lines
Hi,
Does anybody know how to remap local addresses, if I want to connect two networks via VNP with the same IP space in the private address range?
use the NETMAP target from POM.
-j
--
"Mmmm...free goo."
--The Simpsons
Re: port forwarding partially working (SOLVED)
In reply to a message not in the archiveQuoted 37 lines · Raul I. Becette
Quoted 13 lines · Cedric Blancher
Quoted 5 lines · Raul I. Becette
I am having trouble forwarding ports to internal servers.
$IPTABLES -A FORWARD -i $PUB_IF -p tcp --dport 1024 -j ACCEPT
$IPTABLES -t nat -A PREROUTING -i $PUB_IF -p tcp --dport 1024 -j DNAT --to $SERV_BIBL:110 works ok when I telnet $PUB_IF 1024. I got redirected to the POP server with no problems.I should not.
How can I accomplish the port forwarding for the services?
What I want to do is assign ports 1024-1030 to redirect services for $SERV_BIBL, ports 1031-1039 to redirect services for $SERV_ING and so on.
Quoted 18 lines
If you DNAT your connexion to $PUB_IF port 1024 to $SERV_BIBL:110, then your FORWARD chain will see a packet to destined to port 110, not 1024. If you just look at Netfilter architecture, you will see FORWARD chain traversal occurs _after_ PREROUTING traversal. Thus, packets are already NDATed and have their destination modified when hitting FORWARD rules.
That's why, in order to accept your DNATed connection, you should have :
$IPTABLES -A FORWARD -i $PUB_IF -p tcp --dport 110 -j ACCEPT
If it works anyway, it means you must have some kind of overlaping rule that accidentally accepts thoses packets.
Now, going to your script, there's indeed a rule that accepts destination port 110 whatever their destination is :
$IPTABLES -A FORWARD -i $PUB_IF -p tcp --dport 110 -j ACCEPT
Quoted 9 lines
Quoted 5 lines
So your stuff works, but that's an accident !
Why is an accident?
TIA
Hello list
I solved the problem modifying the FORWARD line adding the state of the connection as NEW
$IPTABLES -A FORWARD -p tcp --dport $SERVICE_PORT -m state --state NEW -j ACCEPT
and deleted the FORWARD lines that accepted connections with --dport 10nn. The PREROUTING chain takes care of redirecting that port.
That part of my script now is:
# Abro el puerto de smtp para enviar los correos desde unpata hacia a La Gran Bestia POP $IPTABLES -A FORWARD -i $PUB_IF -s $LAN_SMTP -p tcp --dport 25 -j ACCEPT $IPTABLES -t nat -A PREROUTING -i $PUB_IF -p tcp --dport 25 -j DNAT --to $LAN_POP:25
# Abro puertos para servicios accesibles desde Internet
$IPTABLES -A FORWARD -i $PUB_IF -p tcp --dport 21 -m state --state NEW -j ACCEPT
# POP a cuentas unpata.edu.ar y unp.edu.ar
$IPTABLES -A FORWARD -i $PUB_IF -p tcp --dport 110 -j ACCEPT
$IPTABLES -t nat -A PREROUTING -i $PUB_IF -p tcp --dport 110 -j DNAT --to $LAN_POP:110
# Servicios biblioteca.unp.edu.ar
$IPTABLES -t nat -A PREROUTING -i $PUB_IF -p tcp --dport 1024 -j DNAT --to $SERV_BIBL:21 $IPTABLES -t nat -A PREROUTING -i $PUB_IF -p tcp --dport 1025 -j DNAT --to $SERV_BIBL:25 $IPTABLES -t nat -A PREROUTING -i $PUB_IF -p tcp --dport 1026 -j DNAT --to $SERV_BIBL:110
# Servicios ing.unp.edu.ar
$IPTABLES -t nat -A PREROUTING -i $PUB_IF -p tcp --dport 1030 -j DNAT --to $SERV_ING:21 $IPTABLES -t nat -A PREROUTING -i $PUB_IF -p tcp --dport 1031 -j DNAT --to $SERV_ING:110
I used information from the "slow ftp" thread and wondered myself "what if I specify the state of the connection?" It worked.
Thanks a lot for the help
Signature · 9 lines
----------------------------------------------------------------- Raul I. Becette E-mail: [email protected] Area Redes y Telecomunicaciones Univ. Nac. de la Patagonia San Juan Bosco Ciudad Universitaria - Km.4. 9000 - Comodoro Rivadavia - Chubut Tel/Fax : (0297) - 4550073 ------------------------------------------------------------------