drivers/serial/jsm: new serial device driver
PATCH 2/7 drivers/serial/jsm: new serial device driver
This second patch is for jsm_tty.c and included all handling TTY layer functions.
drivers/serial/jsm/jsm_tty.c +140 -0
@@ -0,0 +1,1273 @@ +/* +* Copyright 2003 Digi International (www.digi.com) +* Scott H Kilau <Scott_Kilau at digi dot com> +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2, or (at your option) +* any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED; without even the +* implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR +* PURPOSE. See the GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +* +* +* NOTE TO LINUX KERNEL HACKERS: DO NOT REFORMAT THIS CODE! +* +* This is shared code between Digi's CVS archive and the +* Linux Kernel sources. +* Changing the source just for reformatting needlessly breaks +* our CVS diff history. +* +* Send any bug fixes/changes to: Eng.Linux at digi dot com. +* Thank you. +*/ + +/************************************************************************ +* +* This file implements the tty driver functionality for the +* Neo and ClassicBoard PCI based product lines. +* +************************************************************************ +* +* $Id: jsm_tty.c,v 1.79 2004/09/25 07:01:46 scottk Exp $ +*/ + +#include <linux/kernel.h> +#include <linux/version.h> +#include <linux/sched.h> /* For jiffies, task states */ +#include <linux/interrupt.h> /* For tasklet and interrupt structs/defines */ +#include <linux/module.h> +#include <linux/ctype.h> +#include <linux/tty.h> +#include <linux/tty_flip.h> +#include <linux/serial_reg.h> +#include <linux/slab.h> +#include <linux/delay.h> /* For udelay */ +#include <linux/device.h> /* For udelay */ +#include <asm/uaccess.h> /* For copy_from_user/copy_to_user */ + +#include "jsm_driver.h" +#include "jsm_tty.h" +#include "jsm_types.h" +#include "jsm_neo.h" +#include "dpacompat.h" + +/* +* internal variables +*/ +#define JSM_CHANNEL ((struct channel_t *)port) + +/* +* Define a local default termios struct. All ports will be created +* with this termios initially. +* +* This defines a raw port at 9600 baud, 8 data bits, no parity, +* 1 stop bit. +*/ + +/*Begin Serial_core API*/ + +static inline int jsm_get_mstat (struct channel_t *ch) +{ +unsigned char mstat; +unsigned char result; + +DPR_IOCTL (("jsm_getmstat start\n" )); + + mstat = (ch->ch_mostat | ch->ch_mistat); + + result =0 ; + +if (mstat &UART_MCR_DTR ) + result |=TIOCM_DTR ; +if (mstat &UART_MCR_RTS ) + result |=TIOCM_RTS ; +if (mstat &UART_MSR_CTS ) + result |=TIOCM_CTS ; +if (mstat &UART_MSR_DSR ) + result |=TIOCM_DSR ; +if (mstat &UART_MSR_RI ) + result |=TIOCM_RI ; +if (mstat &UART_MSR_DCD ) + result |=TIOCM_CD ; + +DPR_IOCTL (("jsm_getmstat finish\n" )); +return result; +} + +static unsigned int jsm_tty_tx_empty (struct uart_port *port) +{ +return TIOCSER_TEMT ; +} + +/* +* Return modem signals to ld. +*/ +static unsigned int jsm_tty_get_mctrl (struct uart_port *port) +{ +int result; + +DPR_IOCTL (("jsm_get_modem_info start\n" )); + + result =jsm_get_mstat (JSM_CHANNEL ); + +if (result <0 ) +return -ENXIO ; + +DPR_IOCTL (("jsm_get_modem_info finish\n" )); + +return result; +} + +/* +* jsm_set_modem_info() +* +* Set modem signals, called by ld. +*/ +static void jsm_tty_set_mctrl (struct uart_port *port,unsigned int mctrl) +{ +DPR_IOCTL (("jsm_set_modem_info() start\n" )); + +if (mctrl &TIOCM_RTS ) +JSM_CHANNEL ->ch_mostat |=UART_MCR_RTS ; +else +JSM_CHANNEL ->ch_mostat &= ~UART_MCR_RTS ;
+ if (mctrl & TIOCM_DTR)
+ JSM_CHANNEL->ch_mostat |= UART_MCR_DTR;
+ else
+ JSM_CHANNEL->ch_mostat &= ~UART_MCR_DTR;
+
+ JSM_CHANNEL->ch_bd->bd_ops->assert_modem_signals(JSM_CHANNEL);
+
+ DPR_IOCTL(("jsm_set_modem_info finish\n"));
+
+ udelay(10);
+
+}
+
+static void jsm_tty_start_tx(struct uart_port *port, unsigned int tty_start) +{
+ DPR_IOCTL(("dgcn_tty_start start\n"));
+
+ JSM_CHANNEL->ch_flags &= ~(CH_STOP);
+
+ jsm_tty_write(port);
+
+ DPR_IOCTL(("jsm_tty_start finish\n"));
+
+}
+
+static void jsm_tty_stop_tx(struct uart_port *port, unsigned int tty_stop) +{
+ DPR_IOCTL(("jsm_tty_stop start\n"));
+
+ JSM_CHANNEL->ch_flags |= (CH_STOP);
+
+ DPR_IOCTL(("jsm_tty_stop finish\n"));
+}
+
+static void jsm_tty_send_xchar(struct uart_port *port, char ch) +{
+ unsigned long lock_flags;
+
+ spin_lock_irqsave(&port->lock, lock_flags);
+ if (ch == port->info->tty->termios->c_cc[VSTART])
+ JSM_CHANNEL->ch_bd->bd_ops->send_start_character(JSM_CHANNEL);
+
+ if (ch == port->info->tty->termios->c_cc[VSTOP])
+ JSM_CHANNEL->ch_bd->bd_ops->send_stop_character(JSM_CHANNEL);
+ spin_unlock_irqrestore(&port->lock, lock_flags);
+}
+
+static void jsm_tty_stop_rx(struct uart_port *port)
+{
+
+ JSM_CHANNEL->ch_bd->bd_ops->disable_receiver(JSM_CHANNEL);
+
+}
+
+static void jsm_tty_break(struct uart_port *port, int break_state) +{
+ unsigned long lock_flags;
+ spin_lock_irqsave(&port->lock, lock_flags);
+ if (break_state == -1)
+ JSM_CHANNEL->ch_bd->bd_ops->send_break(JSM_CHANNEL);
+ else
+ neo_clear_break(JSM_CHANNEL,0);
+
+ spin_unlock_irqrestore(&port->lock, lock_flags);
+}
+
+static int jsm_tty_open(struct uart_port *port)
+{
+ struct board_t *brd;
+ struct un_t *un;
+ int rc = 0;
+
+ /* Get board pointer from our array of majors we have allocated */
+ brd = JSM_CHANNEL->ch_bd;
+
+ un = &JSM_CHANNEL->ch_tun;
+ un->un_type = JSM_SERIAL;
+
+ /*
+ * Initialize tty's
+ */
+ if (!(un->un_flags & UN_ISOPEN)) {
+ /* Store important variables. */
+ un->un_ch = JSM_CHANNEL;
+ un->un_dev = JSM_CHANNEL->ch_portnum;
+
+ /* Maybe do something here to the TTY struct as well? */
+ }
+
+ /*
+ * Allocate channel buffers for read/write/error.
+ * Set flag, so we don't get trounced on.
+ */
+ JSM_CHANNEL->ch_flags |= (CH_OPENING);
+
+ /* Drop locks, as malloc with GFP_KERNEL can sleep */
+
+ if (!JSM_CHANNEL->ch_rqueue) {
+ JSM_CHANNEL->ch_rqueue = (uchar *) kmalloc(RQUEUESIZE, GFP_KERNEL);
+ if (!JSM_CHANNEL->ch_rqueue) {
+ DPR_INIT(("unable to allocate read queue buf"));
+ return -ENOMEM;
+ }
+ memset(JSM_CHANNEL->ch_rqueue, 0, RQUEUESIZE);
+ }
+ if (!JSM_CHANNEL->ch_equeue) {
+ JSM_CHANNEL->ch_equeue = (uchar *) kmalloc(EQUEUESIZE, GFP_KERNEL);
+ if (!JSM_CHANNEL->ch_equeue) {
+ DPR_INIT(("unable to allocate error queue buf"));
+ return -ENOMEM;
+ }
+ memset(JSM_CHANNEL->ch_equeue, 0, EQUEUESIZE);
+ }
+ if (!JSM_CHANNEL->ch_wqueue) {
+ JSM_CHANNEL->ch_wqueue = (uchar *) kmalloc(WQUEUESIZE, GFP_KERNEL);
+ if (!JSM_CHANNEL->ch_wqueue) {
+ DPR_INIT(("unable to allocate write queue buf"));
+ return -ENOMEM;
+ }
+ memset(JSM_CHANNEL->ch_wqueue, 0, WQUEUESIZE);
+ }
+
+ JSM_CHANNEL->ch_flags &= ~(CH_OPENING);
+ /*
+ * Initialize if neither terminal is open.
+ */
+ if (!(un->un_flags & UN_ISOPEN)) {
+ DPR_OPEN(("jsm_open: initializing channel in open...\n"));
+
+ /*
+ * Flush input queues.
+ */
+ JSM_CHANNEL->ch_r_head = JSM_CHANNEL->ch_r_tail = 0;
+ JSM_CHANNEL->ch_e_head = JSM_CHANNEL->ch_e_tail = 0;
+ JSM_CHANNEL->ch_w_head = JSM_CHANNEL->ch_w_tail = 0;
+
+ brd->bd_ops->flush_uart_write(JSM_CHANNEL);
+ brd->bd_ops->flush_uart_read(JSM_CHANNEL);
+
+ JSM_CHANNEL->ch_flags = 0;
+ JSM_CHANNEL->ch_cached_lsr = 0;
+ JSM_CHANNEL->ch_stops_sent = 0;
+
+ JSM_CHANNEL->ch_c_cflag = port->info->tty->termios->c_cflag; + JSM_CHANNEL->ch_c_iflag = port->info->tty->termios->c_iflag; + JSM_CHANNEL->ch_c_oflag = port->info->tty->termios->c_oflag; + JSM_CHANNEL->ch_c_lflag = port->info->tty->termios->c_lflag;
+ JSM_CHANNEL->ch_startc = port->info->tty->termios->c_cc[VSTART];
+ JSM_CHANNEL->ch_stopc = port->info->tty->termios->c_cc[VSTOP];
+
+ /* Tell UART to init itself */
+ brd->bd_ops->uart_init(JSM_CHANNEL);
+ }
+ /*
+ * Run param in case we changed anything
+ */
+ brd->bd_ops->param(JSM_CHANNEL);
+
+ jsm_carrier(JSM_CHANNEL);
+ un->un_open_count++;
+ un->un_flags |= (UN_ISOPEN);
+
+ DPR_OPEN(("jsm_tty_open finished\n"));
+ return rc;
+}
+
+static void jsm_tty_close(struct uart_port *port) +{
+ struct board_t *bd;
+ struct un_t *un;
+ struct termios *ts;
+ int rc = 0;
+
+ un = &JSM_CHANNEL->ch_tun;
+
+ bd = JSM_CHANNEL->ch_bd;
+
+ ts = JSM_CHANNEL->uart_port.info->tty->termios;
+
+ DPR_CLOSE(("Close called\n"));
+
+ un->un_flags |= UN_CLOSING;
+
+ if ((JSM_CHANNEL->ch_open_count == 0)) {
+
+ JSM_CHANNEL->ch_flags &= ~(CH_STOPI);
+
+ /* wait for output to drain */
+ /* This will also return if we take an interrupt */
+
+ DPR_CLOSE(("Calling wait_for_drain\n"));
+ rc = bd->bd_ops->drain(port->info->tty, 0);
+
+ DPR_CLOSE(("After calling wait_for_drain\n"));
+
+ if (rc)
+ DPR_BASIC(("jsm_tty_close - bad return: %d ", rc));
+
+ /*
+ * If we have HUPCL set, lower DTR and RTS
+ */
+ if (JSM_CHANNEL->ch_c_cflag & HUPCL) {
+ DPR_CLOSE(("Close. HUPCL set, dropping DTR/RTS\n"));
+
+ /* Drop RTS/DTR */
+ JSM_CHANNEL->ch_mostat &= ~(UART_MCR_DTR | UART_MCR_RTS);
+ bd->bd_ops->assert_modem_signals(JSM_CHANNEL);
+
+ /*
+ * Go to sleep to ensure RTS/DTR
+ * have been dropped for modems to see it.
+ */
+ }
+
+ JSM_CHANNEL->ch_old_baud = 0;
+
+ /* Turn off UART interrupts for this port */
+ JSM_CHANNEL->ch_bd->bd_ops->uart_off(JSM_CHANNEL);
+ }
+
+ un->un_tty = NULL;
+ un->un_flags &= ~(UN_ISOPEN | UN_CLOSING);
+
+ DPR_CLOSE(("Close. Doing wakeups\n"));
+
+ DPR_BASIC(("jsm_tty_close - complete\n"));
+}
+
+static void jsm_tty_set_termios(struct uart_port *port,
+ struct termios *termios,
+ struct termios *old_termios)
+{
+ unsigned long lock_flags;
+
+ spin_lock_irqsave(&port->lock, lock_flags);
+ JSM_CHANNEL->ch_c_cflag = termios->c_cflag; + JSM_CHANNEL->ch_c_iflag = termios->c_iflag; + JSM_CHANNEL->ch_c_oflag = termios->c_oflag; + JSM_CHANNEL->ch_c_lflag = termios->c_lflag;
+ JSM_CHANNEL->ch_startc = termios->c_cc[VSTART];
+ JSM_CHANNEL->ch_stopc = termios->c_cc[VSTOP];
+
+ JSM_CHANNEL->ch_bd->bd_ops->param(JSM_CHANNEL);
+ jsm_carrier(JSM_CHANNEL);
+ spin_unlock_irqrestore(&port->lock, lock_flags);
+}
+
+static const char *jsm_tty_type(struct uart_port *port)
+{
+ return "jsm";
+}
+
+static void jsm_tty_release_port(struct uart_port *port)
+{
+}
+
+static int jsm_tty_request_port(struct uart_port *port)
+{
+ return 0;
+}
+
+static void jsm_config_port(struct uart_port *port, int flags)
+{
+ port->type = PORT_JSM;
+}
+
+static struct uart_ops jsm_ops = {
+ .tx_empty = jsm_tty_tx_empty,
+ .set_mctrl = jsm_tty_set_mctrl,
+ .get_mctrl = jsm_tty_get_mctrl,
+ .stop_tx = jsm_tty_stop_tx,
+ .start_tx = jsm_tty_start_tx,
+ .send_xchar = jsm_tty_send_xchar,
+ .stop_rx = jsm_tty_stop_rx,
+ .break_ctl = jsm_tty_break,
+ .startup = jsm_tty_open,
+ .shutdown = jsm_tty_close,
+ .set_termios = jsm_tty_set_termios,
+ .type = jsm_tty_type,
+ .release_port = jsm_tty_release_port,
+ .request_port = jsm_tty_request_port,
+ .config_port = jsm_config_port,
+};
+
+/*
+ * jsm_tty_register()
+ *
+ * Init the tty subsystem for this board.
+ */
+int jsm_tty_register(struct board_t *brd)
+{
+ int rc = 0;
+
+ DPR_INIT(("tty_register start\n"));
+
+ if (!brd->jsm_Major_Serial_Registered) {
+ if (rc < 0) {
+ APR(("Can't register tty device (%d)\n", rc));
+ return rc;
+ }
+ brd->jsm_Major_Serial_Registered = TRUE;
+ brd->jsm_Serial_Major = jsm_uart_driver.major;
+ }
+
+ DPR_INIT(("JSM REGISTER TTY: MAJOR: %d\n", jsm_uart_driver.major));
+
+ return rc;
+}
+
+/*
+ * jsm_tty_init()
+ *
+ * Init the tty subsystem. Called once per board after board has been
+ * downloaded and init'ed.
+ */
+int jsm_tty_init(struct board_t *brd)
+{
+ int i;
+ uchar *vaddr;
+ struct channel_t *ch;
+
+ if (!brd)
+ return -ENXIO;
+
+ DPR_INIT(("jsm_tty_init start\n"));
+
+ /*
+ * Initialize board structure elements.
+ */
+
+ vaddr = brd->re_map_membase;
+
+ brd->nasync = brd->maxports;
+
+ /*
+ * Allocate channel memory that might not have been allocated
+ * when the driver was first loaded.
+ */
+ for (i = 0; i < brd->nasync; i++) {
+ if (!brd->channels[i]) {
+
+ /*
+ * Okay to malloc with GFP_KERNEL, we are not at
+ * interrupt context, and there are no locks held.
+ */
+ brd->channels[i] = kmalloc(sizeof(struct channel_t), GFP_KERNEL);
+ if (!brd->channels[i]) {
+ DPR_CORE(("%s:%d Unable to allocate memory for channel struct\n",
+ __FILE__, __LINE__));
+ }
+ memset(brd->channels[i], 0, sizeof(struct channel_t));
+ }
+ }
+
+ ch = brd->channels[0];
+ vaddr = brd->re_map_membase;
+
+ /* Set up channel variables */
+ for (i = 0; i < brd->nasync; i++, ch = brd->channels[i]) {
+
+ if (!brd->channels[i])
+ continue;
+
+ spin_lock_init(&ch->ch_lock);
+
+ /* Store all our magic numbers */
+ ch->magic = JSM_CHANNEL_MAGIC;
+ ch->ch_tun.magic = JSM_UNIT_MAGIC;
+ ch->ch_pun.magic = JSM_UNIT_MAGIC;
+
+ if (brd->bd_uart_offset == 0x200)
+ ch->ch_neo_uart = (struct neo_uart_struct *) ((ulong) vaddr + (brd->bd_uart_offset * i));
+
+ ch->ch_bd = brd;
+ ch->ch_portnum = i;
+
+ /* .25 second delay */
+ ch->ch_close_delay = 250;
+
+ init_waitqueue_head(&ch->ch_flags_wait);
+ init_waitqueue_head(&ch->ch_tun.un_flags_wait);
+ init_waitqueue_head(&ch->ch_pun.un_flags_wait);
+ init_waitqueue_head(&ch->ch_sniff_wait);
+ }
+
+ DPR_INIT(("jsm_tty_init finish\n"));
+
+ return 0;
+}
+
+int jsm_uart_port_init(struct board_t *brd)
+{
+ int i;
+ uchar *vaddr;
+ struct channel_t *ch;
+
+ if (!brd)
+ return -ENXIO;
+
+ DPR_INIT(("jsm_uart_port_init start\n"));
+
+ /*
+ * Initialize board structure elements.
+ */
+
+ vaddr = brd->re_map_membase;
+
+ brd->nasync = brd->maxports;
+
+ /* Set up channel variables */
+ for (i = 0; i < brd->nasync; i++, ch = brd->channels[i]) {
+
+ if (!brd->channels[i])
+ continue;
+
+ brd->channels[i]->uart_port.irq = brd->irq;
+ brd->channels[i]->uart_port.type = PORT_JSM;
+ brd->channels[i]->uart_port.iotype = UPIO_MEM;
+ brd->channels[i]->uart_port.membase = brd->re_map_membase;
+ brd->channels[i]->uart_port.fifosize = 16;
+ brd->channels[i]->uart_port.ops = &jsm_ops;
+ brd->channels[i]->uart_port.line = brd->channels[i]->ch_portnum + brd->boardnum * 2;
+ if (uart_add_one_port (&jsm_uart_driver, &brd->channels[i]->uart_port))
+ printk(KERN_INFO "Added device failed\n");
+ else
+ printk(KERN_INFO "Added device \n");
+ }
+
+ DPR_INIT(("jsm_uart_port_init finish\n"));
+
+ return 0;
+}
+
+int jsm_remove_uart_port(struct board_t *brd)
+{
+ int i;
+ struct channel_t *ch;
+
+ if (!brd)
+ return -ENXIO;
+
+ DPR_INIT(("jsm_uart_port_init start\n"));
+
+ /*
+ * Initialize board structure elements.
+ */
+
+ brd->nasync = brd->maxports;
+
+ /* Set up channel variables */
+ for (i = 0; i < brd->nasync; i++) {
+
+ if (!brd->channels[i])
+ continue;
+
+ ch = brd->channels[i];
+
+ uart_remove_one_port(&jsm_uart_driver, &brd->channels[i]->uart_port);
+ }
+
+ DPR_INIT(("jsm_uart_port_init finish\n"));
+
+ return 0;
+}
+
+/*
+ * jsm_tty_uninit()
+ *
+ * Uninitialize the TTY portion of this driver. Free all memory and
+ * resources.
+ */
+
+void jsm_tty_uninit(struct board_t *brd)
+{
+
+ if (brd->jsm_Major_Serial_Registered)
+ brd->jsm_Major_Serial_Registered = FALSE;
+}
+
+#define TMPBUFLEN (1024)
+
+/*
+ * jsm_sniff - Dump data out to the "sniff" buffer if the
+ * proc sniff file is opened...
+ */
+
+void jsm_sniff_nowait_nolock(struct channel_t *ch, uchar *text, uchar *buf, int len) +{
+ struct timeval tv;
+ int n;
+ int r;
+ int nbuf;
+ int i;
+ int tmpbuflen;
+ char tmpbuf[TMPBUFLEN];
+ char *p = tmpbuf;
+ int too_much_data;
+
+ /* Leave if sniff not open */
+ if (!(ch->ch_sniff_flags & SNIFF_OPEN))
+ return;
+
+ do_gettimeofday(&tv);
+
+ /* Create our header for data dump */
+ p += sprintf(p, "<%ld %ld><%s><", tv.tv_sec, tv.tv_usec, text);
+ tmpbuflen = p - tmpbuf;
+
+ do {
+ too_much_data = 0;
+
+ for (i = 0; i < len && tmpbuflen < (TMPBUFLEN - 4); i++) {
+ p += sprintf(p, "%02x ", *buf);
+ buf++;
+ tmpbuflen = p - tmpbuf;
+ }
+
+ if (tmpbuflen < (TMPBUFLEN - 4)) {
+ if (i > 0)
+ p += sprintf(p - 1, "%s\n", ">");
+ else
+ p += sprintf(p, "%s\n", ">");
+ } else {
+ too_much_data = 1;
+ len -= i;
+ }
+
+ nbuf = strlen(tmpbuf);
+ p = tmpbuf;
+
+ /*
+ * Loop while data remains.
+ */
+ while (nbuf > 0 && ch->ch_sniff_buf != 0) {
+ /*
+ * Determine the amount of available space left in the
+ * buffer. If there's none, wait until some appears.
+ */
+ n = (ch->ch_sniff_out - ch->ch_sniff_in - 1) & SNIFF_MASK;
+
+ /*
+ * If there is no space left to write to in our sniff buffer,
+ * we have no choice but to drop the data.
+ * We *cannot* sleep here waiting for space, because this
+ * function was probably called by the interrupt/timer routines!
+ */
+ if (n == 0)
+ return;
+
+ /*
+ * Copy as much data as will fit.
+ */
+
+ if (n > nbuf)
+ n = nbuf;
+
+ r = SNIFF_MAX - ch->ch_sniff_in;
+
+ if (r <= n) {
+ memcpy(ch->ch_sniff_buf + ch->ch_sniff_in, p, r);
+
+ n -= r;
+ ch->ch_sniff_in = 0;
+ p += r;
+ nbuf -= r;
+ }
+
+ memcpy(ch->ch_sniff_buf + ch->ch_sniff_in, p, n);
+
+ ch->ch_sniff_in += n;
+ p += n;
+ nbuf -= n;
+
+ /*
+ * Wakeup any thread waiting for data
+ */
+ if (ch->ch_sniff_flags & SNIFF_WAIT_DATA) {
+ ch->ch_sniff_flags &= ~SNIFF_WAIT_DATA;
+ wake_up_interruptible(&ch->ch_sniff_wait);
+ }
+ }
+
+ /*
+ * If the user sent us too much data to push into our tmpbuf,
+ * we need to keep looping around on all the data.
+ */
+ if (too_much_data) {
+ p = tmpbuf;
+ tmpbuflen = 0;
+ }
+
+ } while (too_much_data);
+}
+
+/*
+ *
+ *jsm_input - Process received data.
+ *
+ *ch - Pointer to channel structure.
+ *
+ */
+
+void jsm_input(struct channel_t *ch)
+{
+ struct board_t *bd;
+ struct tty_struct *tp;
+ uint rmask;
+ ushort head;
+ ushort tail;
+ int data_len;
+ ulong lock_flags;
+ int flip_len;
+ int len = 0;
+ int n = 0;
+ char *buf = NULL;
+ char *buf2 = NULL;
+ int s = 0;
+ int i = 0;
+
+ if (!ch || ch->magic != JSM_CHANNEL_MAGIC)
+ return;
+
+ tp = ch->uart_port.info->tty;
+
+ bd = ch->ch_bd;
+ if(!bd || bd->magic != JSM_BOARD_MAGIC)
+ return;
+
+ spin_lock_irqsave(&ch->ch_lock, lock_flags);
+
+ /*
+ *Figure the number of characters in the buffer.
+ *Exit immediately if none.
+ */
+
+ rmask = RQUEUEMASK;
+
+ head = ch->ch_r_head & rmask;
+ tail = ch->ch_r_tail & rmask;
+
+ data_len = (head - tail) & rmask;
+ if (data_len == 0) {
+ spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
+ return;
+ }
+
+ DPR_READ(("jsm_input start\n"));
+
+ /*
+ *If the device is not open, or CREAD is off, flush
+ *input data and return immediately.
+ */
+ if (!tp || !(ch->ch_tun.un_flags & UN_ISOPEN) ||
+ !(tp->termios->c_cflag & CREAD) || (ch->ch_tun.un_flags & UN_CLOSING)) {
+
+ DPR_READ(("input. dropping %d bytes on port %d...\n", data_len, ch->ch_portnum));
+ DPR_READ(("input. tp: %p tp->magic: %x MAGIC:%x ch flags: %x\n",
+ tp, tp ? tp->magic : 0, TTY_MAGIC, ch->ch_tun.un_flags));
+
+ ch->ch_r_head = tail;
+
+ /* Force queue flow control to be released, if needed */
+ jsm_check_queue_flow_control(ch);
+
+ spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
+ return;
+ }
+
+ /*
+ * If we are throttled, simply don't read any data.
+ */
+ if (ch->ch_flags & CH_STOPI) {
+ spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
+ DPR_READ(("Port %d throttled, not reading any data. head: %x tail: %x\n",
+ ch->ch_portnum, head, tail));
+ return;
+ }
+
+ DPR_READ(("jsm_input start 2\n"));
+
+ /*
+ * If the rxbuf is empty and we are not throttled, put as much
+ * as we can directly into the linux TTY flip buffer.
+ * The jsm_rawreadok case takes advantage of carnal knowledge that
+ * the char_buf and the flag_buf are next to each other and
+ * are each of (2 * TTY_FLIPBUF_SIZE) size.
+ *
+ * NOTE: if(!tty->real_raw), the call to ldisc.receive_buf
+ *actually still uses the flag buffer, so you can't
+ *use it for input data
+ */
+ if (jsm_rawreadok) {
+ if (tp->real_raw)
+ flip_len = MYFLIPLEN;
+ else
+ flip_len = 2 * TTY_FLIPBUF_SIZE;
+ } else
+ flip_len = TTY_FLIPBUF_SIZE - tp->flip.count;
+
+ len = min(data_len, flip_len);
+ len = min(len, (N_TTY_BUF_SIZE - 1) - tp->read_cnt);
+
+ if (len <= 0) {
+ spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
+ DPR_READ(("jsm_input 1 - finish\n"));
+ return;
+ }
+
+ /*
+ * If we're bypassing flip buffers on rx, we can blast it
+ * right into the beginning of the buffer.
+ */
+ if (jsm_rawreadok) {
+ if (tp->real_raw) {
+ if (ch->ch_flags & CH_FLIPBUF_IN_USE) {
+ DPR_READ(("JSM - FLIPBUF in use. delaying input\n"));
+ spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
+ return;
+ }
+ ch->ch_flags |= CH_FLIPBUF_IN_USE;
+ buf = ch->ch_bd->flipbuf;
+ buf2 = NULL;
+ } else {
+ buf = tp->flip.char_buf;
+ buf2 = tp->flip.flag_buf;
+ }
+ } else {
+ buf = tp->flip.char_buf_ptr;
+ buf2 = tp->flip.flag_buf_ptr;
+ }
+
+ n = len;
+
+ /*
+ * n now contains the most amount of data we can copy,
+ * bounded either by the flip buffer size or the amount
+ * of data the card actually has pending...
+ */
+ while (n) {
+ s = ((head >= tail) ? head : RQUEUESIZE) - tail;
+ s = min(s, n);
+
+ if (s <= 0)
+ break;
+
+ memcpy(buf, ch->ch_rqueue + tail, s);
+ jsm_sniff_nowait_nolock(ch, "USER READ", ch->ch_rqueue + tail, s);
+
+ /* buf2 is only set when port isn't raw */
+ if (buf2)
+ memcpy(buf2, ch->ch_equeue + tail, s);
+
+
+
+ tail += s;
+ buf += s;
+ if (buf2)
+ buf2 += s;
+ n -= s;
+ /* Flip queue if needed */
+ tail &= rmask;
+ }
+
+ /*
+ * In high performance mode, we don't have to update
+ * flag_buf or any of the counts or pointers into flip buf.
+ */
+ if (!jsm_rawreadok) {
+ if (I_PARMRK(tp) || I_BRKINT(tp) || I_INPCK(tp)) {
+ for (i = 0; i < len; i++) {
+ /*
+ * Give the Linux ld the flags in the
+ * format it likes.
+ */
+ if (tp->flip.flag_buf_ptr[i] & UART_LSR_BI)
+ tp->flip.flag_buf_ptr[i] = TTY_BREAK;
+ else if (tp->flip.flag_buf_ptr[i] & UART_LSR_PE)
+ tp->flip.flag_buf_ptr[i] = TTY_PARITY;
+ else if (tp->flip.flag_buf_ptr[i] & UART_LSR_FE)
+ tp->flip.flag_buf_ptr[i] = TTY_FRAME;
+ else
+ tp->flip.flag_buf_ptr[i] = TTY_NORMAL;
+ }
+ } else {
+ memset(tp->flip.flag_buf_ptr, 0, len);
+ }
+
+ tp->flip.char_buf_ptr += len;
+ tp->flip.flag_buf_ptr += len;
+ tp->flip.count += len;
+ }
+ else if (!tp->real_raw) {
+ if (I_PARMRK(tp) || I_BRKINT(tp) || I_INPCK(tp)) {
+ for (i = 0; i < len; i++) {
+ /*
+ * Give the Linux ld the flags in the
+ * format it likes.
+ */
+ if (tp->flip.flag_buf_ptr[i] & UART_LSR_BI)
+ tp->flip.flag_buf_ptr[i] = TTY_BREAK;
+ else if (tp->flip.flag_buf_ptr[i] & UART_LSR_PE)
+ tp->flip.flag_buf_ptr[i] = TTY_PARITY;
+ else if (tp->flip.flag_buf_ptr[i] & UART_LSR_FE)
+ tp->flip.flag_buf_ptr[i] = TTY_FRAME;
+ else
+ tp->flip.flag_buf_ptr[i] = TTY_NORMAL;
+ }
+ } else
+ memset(tp->flip.flag_buf, 0, len);
+ }
+
+ /*
+ * If we're doing raw reads, jam it right into the
+ * line disc bypassing the flip buffers.
+ */
+ if (jsm_rawreadok) {
+ if (tp->real_raw) {
+ ch->ch_r_tail = tail & rmask;
+ ch->ch_e_tail = tail & rmask;
+
+ jsm_check_queue_flow_control(ch);
+
+ /* !!! WE *MUST* LET GO OF ALL LOCKS BEFORE CALLING RECEIVE BUF !!! */
+
+ spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
+
+ DPR_READ(("jsm_input. %d real_raw len:%d calling receive_buf for buffer for board %d\n",
+ __LINE__, len, ch->ch_bd->boardnum));
+ tp->ldisc.receive_buf(tp, ch->ch_bd->flipbuf, NULL, len);
+
+ /* Allow use of channel flip buffer again */
+ spin_lock_irqsave(&ch->ch_lock, lock_flags);
+ ch->ch_flags &= ~CH_FLIPBUF_IN_USE;
+ spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
+
+ } else {
+ ch->ch_r_tail = tail & rmask;
+ ch->ch_e_tail = tail & rmask;
+
+ jsm_check_queue_flow_control(ch);
+
+ /* !!! WE *MUST* LET GO OF ALL LOCKS BEFORE CALLING RECEIVE BUF !!! */
+ spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
+
+ DPR_READ(("jsm_input. %d not real_raw len:%d calling receive_buf for buffer for board %d\n",
+ __LINE__, len, ch->ch_bd->boardnum));
+
+ tp->ldisc.receive_buf(tp, tp->flip.char_buf, tp->flip.flag_buf, len);
+ }
+ } else {
+ ch->ch_r_tail = tail & rmask;
+ ch->ch_e_tail = tail & rmask;
+
+ jsm_check_queue_flow_control(ch);
+
+ spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
+
+ DPR_READ(("jsm_input. %d not jsm_read raw okay scheduling flip\n", __LINE__));
+ tty_schedule_flip(tp);
+ }
+
+ DPR_READ(("jsm_input - finish\n"));
+}
+
+void jsm_carrier(struct channel_t *ch)
+{
+ struct board_t *bd;
+
+ int virt_carrier = 0;
+ int phys_carrier = 0;
+
+ DPR_CARR(("jsm_carrier called...\n"));
+
+ if (!ch || ch->magic != JSM_CHANNEL_MAGIC)
+ return;
+
+ bd = ch->ch_bd;
+
+ if (!bd || bd->magic != JSM_BOARD_MAGIC)
+ return;
+
+ if (ch->ch_mistat & UART_MSR_DCD) {
+ DPR_CARR(("mistat: %x D_CD: %x\n", ch->ch_mistat, ch->ch_mistat & UART_MSR_DCD));
+ phys_carrier = 1;
+ }
+
+ if (ch->ch_c_cflag & CLOCAL)
+ virt_carrier = 1;
+
+ DPR_CARR(("DCD: physical: %d virt: %d\n", phys_carrier, virt_carrier));
+
+ /*
+ * Test for a VIRTUAL carrier transition to HIGH.
+ */
+ if (((ch->ch_flags & CH_FCAR) == 0) && (virt_carrier == 1)) {
+
+ /*
+ * When carrier rises, wake any threads waiting
+ * for carrier in the open routine.
+ */
+
+ DPR_CARR(("carrier: virt DCD rose\n"));
+
+ if (waitqueue_active(&(ch->ch_flags_wait)))
+ wake_up_interruptible(&ch->ch_flags_wait);
+ }
+
+ /*
+ * Test for a PHYSICAL carrier transition to HIGH.
+ */
+ if (((ch->ch_flags & CH_CD) == 0) && (phys_carrier == 1)) {
+
+ /*
+ * When carrier rises, wake any threads waiting
+ * for carrier in the open routine.
+ */
+
+ DPR_CARR(("carrier: physical DCD rose\n"));
+
+ if (waitqueue_active(&(ch->ch_flags_wait)))
+ wake_up_interruptible(&ch->ch_flags_wait);
+ }
+
+ /*
+ * Test for a PHYSICAL transition to low, so long as we aren't + * currently ignoring physical transitions (which is what "virtual + * carrier" indicates). + * + * The transition of the virtual carrier to low really doesn't + * matter... it really only means "ignore carrier state", not + * "make pretend that carrier is there".
+ */
+ if ((virt_carrier == 0) && ((ch->ch_flags & CH_CD) != 0)
+ && (phys_carrier == 0)) {
+ /*
+ * When carrier drops:
+ *
+ * Drop carrier on all open units.
+ *
+ * Flush queues, waking up any task waiting in the
+ * line discipline.
+ *
+ * Send a hangup to the control terminal.
+ *
+ * Enable all select calls.
+ */
+ if (waitqueue_active(&(ch->ch_flags_wait)))
+ wake_up_interruptible(&ch->ch_flags_wait);
+
+ if (ch->ch_tun.un_open_count > 0) {
+ DPR_CARR(("Sending tty hangup\n"));
+ tty_hangup(ch->ch_tun.un_tty);
+ }
+
+ if (ch->ch_pun.un_open_count > 0) {
+ DPR_CARR(("Sending pr hangup\n"));
+ tty_hangup(ch->ch_pun.un_tty);
+ }
+ }
+
+ /*
+ * Make sure that our cached values reflect the current reality.
+ */
+ if (virt_carrier == 1)
+ ch->ch_flags |= CH_FCAR;
+ else
+ ch->ch_flags &= ~CH_FCAR;
+
+ if (phys_carrier == 1)
+ ch->ch_flags |= CH_CD;
+ else
+ ch->ch_flags &= ~CH_CD;
+}
+
+
+void jsm_check_queue_flow_control(struct channel_t *ch) +{
+ int qleft = 0;
+
+ /* Store how much space we have left in the queue */
+ if ((qleft = ch->ch_r_tail - ch->ch_r_head - 1) < 0)
+ qleft += RQUEUEMASK + 1;
+
+ /*
+ * Check to see if we should enforce flow control on our queue because
+ * the ld (or user) isn't reading data out of our queue fast enuf.
+ *
+ * NOTE: This is done based on what the current flow control of the
+ * port is set for.
+ *
+ * 1) HWFLOW (RTS) - Turn off the UART's Receive interrupt.
+ * This will cause the UART's FIFO to back up, and force
+ * the RTS signal to be dropped.
+ * 2) SWFLOW (IXOFF) - Keep trying to send a stop character to
+ * the other side, in hopes it will stop sending data to us.
+ * 3) NONE - Nothing we can do. We will simply drop any extra data
+ * that gets sent into us when the queue fills up.
+ */
+ if (qleft < 256) {
+ /* HWFLOW */
+ if (ch->ch_c_cflag & CRTSCTS) {
+ if(!(ch->ch_flags & CH_RECEIVER_OFF)) {
+ ch->ch_bd->bd_ops->disable_receiver(ch);
+ ch->ch_flags |= (CH_RECEIVER_OFF);
+ DPR_READ(("Internal queue hit hilevel mark (%d)! Turning off interrupts.\n",
+ qleft));
+ }
+ }
+ /* SWFLOW */
+ else if (ch->ch_c_iflag & IXOFF) {
+ if (ch->ch_stops_sent <= MAX_STOPS_SENT) {
+ ch->ch_bd->bd_ops->send_stop_character(ch);
+ ch->ch_stops_sent++;
+ DPR_READ(("Sending stop char! Times sent: %x\n", ch->ch_stops_sent));
+ }
+ }
+ }
+
+ /*
+ * Check to see if we should unenforce flow control because
+ * ld (or user) finally read enuf data out of our queue.
+ *
+ * NOTE: This is done based on what the current flow control of the
+ * port is set for.
+ *
+ * 1) HWFLOW (RTS) - Turn back on the UART's Receive interrupt.
+ * This will cause the UART's FIFO to raise RTS back up,
+ * which will allow the other side to start sending data again.
+ * 2) SWFLOW (IXOFF) - Send a start character to
+ * the other side, so it will start sending data to us again.
+ * 3) NONE - Do nothing. Since we didn't do anything to turn off the
+ * other side, we don't need to do anything now.
+ */
+ if (qleft > (RQUEUESIZE / 2)) {
+ /* HWFLOW */
+ if (ch->ch_c_cflag & CRTSCTS) {
+ if (ch->ch_flags & CH_RECEIVER_OFF) {
+ ch->ch_bd->bd_ops->enable_receiver(ch);
+ ch->ch_flags &= ~(CH_RECEIVER_OFF);
+ DPR_READ(("Internal queue hit lowlevel mark (%d)! Turning on interrupts.\n",
+ qleft));
+ }
+ }
+ /* SWFLOW */
+ else if (ch->ch_c_iflag & IXOFF && ch->ch_stops_sent) {
+ ch->ch_stops_sent = 0;
+ ch->ch_bd->bd_ops->send_start_character(ch);
+ DPR_READ(("Sending start char!\n"));
+ }
+ }
+}
+
+/*
+ * jsm_tty_write()
+ *
+ * Take data from the user or kernel and send it out to the FEP.
+ * In here exists all the Transparent Print magic as well.
+ */
+int jsm_tty_write(struct uart_port *port)
+{
+ struct un_t *un = NULL;
+ int bufcount = 0, n = 0;
+ int data_count = 0,data_count1 =0;
+ ushort head;
+ ushort tail;
+ ushort tmask;
+ uint remain;
+ int temp_tail = port->info->xmit.tail;
+
+ un = &JSM_CHANNEL->ch_tun;
+
+ tmask = WQUEUEMASK;
+ head = (JSM_CHANNEL->ch_w_head) & tmask;
+ tail = (JSM_CHANNEL->ch_w_tail) & tmask;
+
+ if ((bufcount = tail - head - 1) < 0)
+ bufcount += WQUEUESIZE;
+
+ n = bufcount;
+
+ n = min(n, 56);
+ remain = WQUEUESIZE - head;
+
+ data_count = 0;
+ if (n >= remain) {
+ n -= remain;
+ while ((port->info->xmit.head != temp_tail) &&
+ (data_count < remain)) {
+ JSM_CHANNEL->ch_wqueue[head++] =
+ port->info->xmit.buf[temp_tail];
+
+ temp_tail++;
+ temp_tail &= (UART_XMIT_SIZE - 1);
+ data_count++;
+ }
+ if (data_count == remain) head = 0;
+ }
+
+ data_count1 = 0;
+ if (n > 0) {
+ remain = n;
+ while ((port->info->xmit.head != temp_tail) &&
+ (data_count1 < remain)) {
+ JSM_CHANNEL->ch_wqueue[head++] =
+ port->info->xmit.buf[temp_tail];
+
+ temp_tail++;
+ temp_tail &= (UART_XMIT_SIZE - 1);
+ data_count1++;
+
+ }
+ }
+
+ port->info->xmit.tail = temp_tail;
+
+ data_count += data_count1;
+ if (data_count) {
+ head &= tmask;
+ JSM_CHANNEL->ch_w_head = head;
+ }
+
+ if (data_count) {
+ JSM_CHANNEL->ch_bd->bd_ops->copy_data_from_queue_to_uart(JSM_CHANNEL);
+ }
+
+ return data_count;
+}
Quoted 6 lines · Wen Xiong
(quoted diff) +6
-0+#define TMPBUFLEN (1024) + +/* + * jsm_sniff - Dump data out to the "sniff" buffer if the + * proc sniff file is opened... + */
Review
Quoted 10 lines
(quoted diff) +10
-0+ +void jsm_sniff_nowait_nolock(struct channel_t *ch, uchar *text, uchar *buf, int len) +{ + struct timeval tv; + int n; + int r; + int nbuf; + int i; + int tmpbuflen; + char tmpbuf[TMPBUFLEN];
Uses WAY too much stack space.
Jeff
drivers/serial/jsm/jsm_tty.c line 3
Quoted 7 lines · Wen Xiong
diff -Nuar
linux-2.6.9.orig/drivers/serial/jsm/jsm_tty.clinux-2.6.9.new/drivers/serial/jsm/jsm_tty.cdrivers/serial/jsm/jsm_tty.c +3
-0@@ -0,0 +1,1273 @@ +/* +* Copyright 2003 Digi International (www.digi.com) +* Scott H Kilau <Scott_Kilau at digi dot com>
But didn't you do a lot of work on this code too? Shouldn't you be adding your copyright?
drivers/serial/jsm/jsm_tty.c line 28
Quoted 9 lines
drivers/serial/jsm/jsm_tty.c +9
-0+* NOTE TO LINUX KERNEL HACKERS: DO NOT REFORMAT THIS CODE! +* +* This is shared code between Digi's CVS archive and the +* Linux Kernel sources. +* Changing the source just for reformatting needlessly breaks +* our CVS diff history. +* +* Send any bug fixes/changes to: Eng.Linux at digi dot com. +* Thank you.
Is this still true? The formatting looks sane, so you can probably take this all out. And put a real email address in there please...
drivers/serial/jsm/jsm_tty.c line 38
Quoted 1 line
drivers/serial/jsm/jsm_tty.c +1
-0+* $Id: jsm_tty.c,v 1.79 2004/09/25 07:01:46 scottk Exp $
Take these out, not needed.
drivers/serial/jsm/jsm_tty.c line 52
Quoted 1 line
drivers/serial/jsm/jsm_tty.c +1
-0+#include <linux/device.h> /* For udelay */
Comment is incorrect. What do you need device.h for?
drivers/serial/jsm/jsm_tty.c line 81
Quoted 1 line
drivers/serial/jsm/jsm_tty.c +1
-0+DPR_IOCTL (("jsm_getmstat start\n" ));
You have odd macros with two "((", what's up with that? Please use the standard macros dev_dbg() and friends. It's a way to get a standard message out of the kernel.
drivers/serial/jsm/jsm_tty.c line 135
Quoted 3 lines
drivers/serial/jsm/jsm_tty.c +3
-0+static void jsm_tty_set_mctrl (struct uart_port *port,unsigned int mctrl) +{ +DPR_IOCTL (("jsm_set_modem_info() start\n" ));
Oh, and why not just use __FUNCTION__?
drivers/serial/jsm/jsm_tty.c line 102
Quoted 6 lines
drivers/serial/jsm/jsm_tty.c +6
-0+static void jsm_tty_stop_rx (struct uart_port *port) +{ + +JSM_CHANNEL ->ch_bd->bd_ops->disable_receiver (JSM_CHANNEL ); + +}
I think you can drop the extra lines here...
And what's with the all uppercase JSM_CHANNEL? Why not just use the structure pointer.
thanks,
greg k-h
Quoted 87 lines · Greg KH
drivers/serial/jsm/jsm_tty.c line 3
Quoted 9 lines · Wen Xiong
diff -Nuar
linux-2.6.9.orig/drivers/serial/jsm/jsm_tty.clinux-2.6.9.new/drivers/serial/jsm/jsm_tty.cdrivers/serial/jsm/jsm_tty.c +3
-0@@ -0,0 +1,1273 @@ +/* +* Copyright 2003 Digi International (www.digi.com) +* Scott H Kilau <Scott_Kilau at digi dot com> But didn't you do a lot of work on this code too? Shouldn't you be adding your copyright?
drivers/serial/jsm/jsm_tty.c line 12
Quoted 11 lines
drivers/serial/jsm/jsm_tty.c +9
-0+* NOTE TO LINUX KERNEL HACKERS: DO NOT REFORMAT THIS CODE! +* +* This is shared code between Digi's CVS archive and the +* Linux Kernel sources. +* Changing the source just for reformatting needlessly breaks +* our CVS diff history. +* +* Send any bug fixes/changes to: Eng.Linux at digi dot com. +* Thank you. Is this still true? The formatting looks sane, so you can probably take this all out. And put a real email address in there please...
drivers/serial/jsm/jsm_tty.c line 13
Quoted 3 lines
drivers/serial/jsm/jsm_tty.c +1
-0+* $Id: jsm_tty.c,v 1.79 2004/09/25 07:01:46 scottk Exp $ Take these out, not needed.
drivers/serial/jsm/jsm_tty.c line 14
Quoted 3 lines
drivers/serial/jsm/jsm_tty.c +1
-0+#include <linux/device.h> /* For udelay */ Comment is incorrect. What do you need
device.hfor?drivers/serial/jsm/jsm_tty.c line 15
Quoted 3 lines
drivers/serial/jsm/jsm_tty.c +1
-0+DPR_IOCTL (("jsm_getmstat start\n" ));You have odd macros with two "((", what's up with that? Please use the standard macros
dev_dbg()and friends. It's a way to get a standard message out of the kernel.drivers/serial/jsm/jsm_tty.c line 18
Quoted 5 lines
drivers/serial/jsm/jsm_tty.c +3
-0+static void jsm_tty_set_mctrl (struct uart_port *port,unsigned int mctrl) +{ +DPR_IOCTL (("jsm_set_modem_info() start\n" ));Oh, and why not just use
__FUNCTION__?drivers/serial/jsm/jsm_tty.c line 24
Quoted 8 lines
drivers/serial/jsm/jsm_tty.c +6
-0+static void jsm_tty_stop_rx (struct uart_port *port) +{ + +JSM_CHANNEL ->ch_bd->bd_ops->disable_receiver (JSM_CHANNEL ); + +}I think you can drop the extra lines here...
And what's with the all uppercase
JSM_CHANNEL? Why not just use the structure pointer.
Quoted 11 lines
thanks,
greg k-h
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Hi All,
For patch2, the major changes are debug informaion.
Thanks for your help!
wendy
drivers/serial/jsm/jsm_tty.c +1113 -0
@@ -0,0 +1,1113 @@ +/************************************************************************ +* Copyright 2003 Digi International (www.digi.com) +* +* Copyright (C) 2004 IBM Corporation. All rights reserved. +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2, or (at your option) +* any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED; without even the +* implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR +* PURPOSE. See the GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 * Temple Place - Suite 330, Boston, +* MA 02111-1307, USA. +* +* Contact Information: +* Scott H Kilau <[email protected]> +* Wendy Xiong <[email protected]> +* +***********************************************************************/ + +/************************************************************************ +* +* This file implements the tty driver functionality for the +* Neo and ClassicBoard PCI based product lines. +* +************************************************************************ +*/ + +#include <linux/sched.h> /* For jiffies, task states */ +#include <linux/interrupt.h> /* For tasklet and interrupt structs/defines */ +#include <linux/ctype.h> +#include <linux/tty.h> +#include <linux/tty_flip.h> +#include <linux/delay.h> /* For udelay */ +#include <asm/uaccess.h> /* For copy_from_user/copy_to_user */ + +#include "jsm_driver.h" + +/*Begin Serial_core API*/ + +static inline int jsm_get_mstat (struct jsm_channel *ch) +{ +unsigned char mstat; +unsigned char result; + +DPRINTK (IOCTL ,INFO ,"start\n" ); + + mstat = (ch->ch_mostat | ch->ch_mistat); + + result =0 ; + +if (mstat &UART_MCR_DTR ) + result |=TIOCM_DTR ; +if (mstat &UART_MCR_RTS ) + result |=TIOCM_RTS ; +if (mstat &UART_MSR_CTS ) + result |=TIOCM_CTS ; +if (mstat &UART_MSR_DSR ) + result |=TIOCM_DSR ; +if (mstat &UART_MSR_RI ) + result |=TIOCM_RI ; +if (mstat &UART_MSR_DCD ) + result |=TIOCM_CD ; + +DPRINTK (IOCTL ,INFO ,"finish\n" ); +return result; +} + +static unsigned int jsm_tty_tx_empty (struct uart_port *port) +{ +return TIOCSER_TEMT ; +} + +/* +* Return modem signals to ld. +*/ +static unsigned int jsm_tty_get_mctrl (struct uart_port *port) +{ +int result; + +DPRINTK (IOCTL ,INFO ,"start\n" ); + + result =jsm_get_mstat ((struct jsm_channel *)port); + +if (result <0 ) +return -ENXIO ; + +DPRINTK (IOCTL ,INFO ,"finish\n" ); + +return result; +} + +/* +* jsm_set_modem_info() +* +* Set modem signals, called by ld. +*/ +static void jsm_tty_set_mctrl (struct uart_port *port,unsigned int mctrl) +{ +struct jsm_channel *channel = (struct jsm_channel *)port; + +DPRINTK (IOCTL ,INFO ,"start\n" ); + +if (mctrl &TIOCM_RTS ) + channel->ch_mostat |=UART_MCR_RTS ; +else + channel->ch_mostat &= ~UART_MCR_RTS ; + +if (mctrl &TIOCM_DTR ) + channel->ch_mostat |=UART_MCR_DTR ; +else + channel->ch_mostat &= ~UART_MCR_DTR ; + + channel->ch_bd->bd_ops->assert_modem_signals (channel); + +DPRINTK (IOCTL ,INFO ,"finish\n" ); +udelay (10 ); +} + +static void jsm_tty_start_tx (struct uart_port *port,unsigned int tty_start) +{ +struct jsm_channel *channel = (struct jsm_channel *)port; + +DPRINTK (IOCTL ,INFO ,"start\n" ); + + channel->ch_flags &= ~(CH_STOP ); +jsm_tty_write (port); + +DPRINTK (IOCTL ,INFO ,"finish\n" ); +} + +static void jsm_tty_stop_tx (struct uart_port *port,unsigned int tty_stop) +{ +struct jsm_channel *channel = (struct jsm_channel *)port; +DPRINTK (IOCTL ,INFO ,"start\n" ); + + channel->ch_flags |= (CH_STOP ); + +DPRINTK (IOCTL ,INFO ,"finish\n" ); +} + +static void jsm_tty_send_xchar (struct uart_port *port,char ch) +{ +unsigned long lock_flags; +struct jsm_channel *channel = (struct jsm_channel *)port; + +spin_lock_irqsave (&port->lock, lock_flags); +if (ch == port->info->tty->termios->c_cc[VSTART ]) + channel->ch_bd->bd_ops->send_start_character (channel); + +if (ch == port->info->tty->termios->c_cc[VSTOP ]) + channel->ch_bd->bd_ops->send_stop_character (channel); +spin_unlock_irqrestore (&port->lock, lock_flags); +} + +static void jsm_tty_stop_rx (struct uart_port *port) +{ +struct jsm_channel *channel = (struct jsm_channel *)port; + + channel->ch_bd->bd_ops->disable_receiver (channel); +} + +static void jsm_tty_break (struct uart_port *port,int break_state) +{ +unsigned long lock_flags; +struct jsm_channel *channel = (struct jsm_channel *)port; + +spin_lock_irqsave (&port->lock, lock_flags); +if (break_state ==-1 ) + channel->ch_bd->bd_ops->send_break (channel); +else + channel->ch_bd->bd_ops->clear_break (channel,0 ); + +spin_unlock_irqrestore (&port->lock, lock_flags); +} + +static int jsm_tty_open (struct uart_port *port) +{ +struct jsm_board *brd; +int rc =0 ; +struct jsm_channel *channel = (struct jsm_channel *)port; + +/* Get board pointer from our array of majors we have allocated */ + brd = channel->ch_bd; + +/* +* Allocate channel buffers for read/write/error. +* Set flag, so we don't get trounced on. +*/ + channel->ch_flags |= (CH_OPENING ); + +/* Drop locks, as malloc with GFP_KERNEL can sleep */ + +if (!channel->ch_rqueue) { + channel->ch_rqueue = (u8 *)kmalloc (RQUEUESIZE ,GFP_KERNEL ); +if (!channel->ch_rqueue) { +DPRINTK (INIT ,ERR ,"unable to allocate read queue buf" ); +return -ENOMEM ; + } +memset (channel->ch_rqueue,0 ,RQUEUESIZE ); + } +if (!channel->ch_equeue) { + channel->ch_equeue = (u8 *)kmalloc (EQUEUESIZE ,GFP_KERNEL ); +if (!channel->ch_equeue) { +DPRINTK (INIT ,ERR ,"unable to allocate error queue buf" ); +return -ENOMEM ; + } +memset (channel->ch_equeue,0 ,EQUEUESIZE ); + } +if (!channel->ch_wqueue) { + channel->ch_wqueue = (u8 *)kmalloc (WQUEUESIZE ,GFP_KERNEL ); +if (!channel->ch_wqueue) { +DPRINTK (INIT ,ERR ,"unable to allocate write queue buf" ); +return -ENOMEM ; + } +memset (channel->ch_wqueue,0 ,WQUEUESIZE ); + } + + channel->ch_flags &= ~(CH_OPENING ); +/* +* Initialize if neither terminal is open. +*/ +DPRINTK (OPEN ,INFO ,"jsm_open: initializing channel in open...\n" ); + +/* +* Flush input queues. +*/ + channel->ch_r_head = channel->ch_r_tail =0 ; + channel->ch_e_head = channel->ch_e_tail =0 ; + channel->ch_w_head = channel->ch_w_tail =0 ; + + brd->bd_ops->flush_uart_write (channel); + brd->bd_ops->flush_uart_read (channel); + + channel->ch_flags =0 ; + channel->ch_cached_lsr =0 ; + channel->ch_stops_sent =0 ; + + channel->ch_c_cflag = port->info->tty->termios->c_cflag; + channel->ch_c_iflag = port->info->tty->termios->c_iflag; + channel->ch_c_oflag = port->info->tty->termios->c_oflag; + channel->ch_c_lflag = port->info->tty->termios->c_lflag; + channel->ch_startc = port->info->tty->termios->c_cc[VSTART ]; + channel->ch_stopc = port->info->tty->termios->c_cc[VSTOP ]; + +/* Tell UART to init itself */ + brd->bd_ops->uart_init (channel); + +/* +* Run param in case we changed anything +*/ + brd->bd_ops->param (channel); + +jsm_carrier (channel); + + channel->ch_open_count++; + +DPRINTK (OPEN ,INFO ,"finished\n" ); +return rc; +} + +static void jsm_tty_close (struct uart_port *port) +{ +struct jsm_board *bd; +struct termios *ts; +struct jsm_channel *channel = (struct jsm_channel *)port; + +DPRINTK (CLOSE ,INFO ,"start \n" ); + + bd = channel->ch_bd; + ts = channel->uart_port.info->tty->termios; + + channel->ch_flags &= ~(CH_STOPI ); + + channel->ch_open_count--; + +/* +* If we have HUPCL set, lower DTR and RTS +*/ +if (channel->ch_c_cflag &HUPCL ) { +DPRINTK (CLOSE ,INFO ,"Close. HUPCL set, dropping DTR/RTS\n" ); + +/* Drop RTS/DTR */ + channel->ch_mostat &= ~(UART_MCR_DTR |UART_MCR_RTS ); + bd->bd_ops->assert_modem_signals (channel); + } + + channel->ch_old_baud =0 ; + +/* Turn off UART interrupts for this port */ + channel->ch_bd->bd_ops->uart_off (channel); + +DPRINTK (CLOSE ,INFO ,"finish\n" ); +} + +static void jsm_tty_set_termios (struct uart_port *port, +struct termios *termios, +struct termios *old_termios) +{ +unsigned long lock_flags; +struct jsm_channel *channel = (struct jsm_channel *)port; + +spin_lock_irqsave (&port->lock, lock_flags); + channel->ch_c_cflag = termios->c_cflag; + channel->ch_c_iflag = termios->c_iflag; + channel->ch_c_oflag = termios->c_oflag; + channel->ch_c_lflag = termios->c_lflag; + channel->ch_startc = termios->c_cc[VSTART ]; + channel->ch_stopc = termios->c_cc[VSTOP ]; + + channel->ch_bd->bd_ops->param (channel); +jsm_carrier (channel); +spin_unlock_irqrestore (&port->lock, lock_flags); +} + +static const char *jsm_tty_type (struct uart_port *port) +{ +return "jsm" ; +} + +static void jsm_tty_release_port (struct uart_port *port) +{ +} + +static int jsm_tty_request_port (struct uart_port *port) +{ +return 0 ; +} + +static void jsm_config_port (struct uart_port *port,int flags) +{ + port->type =PORT_JSM ; +} + +static struct uart_ops jsm_ops = { + .tx_empty = jsm_tty_tx_empty, + .set_mctrl = jsm_tty_set_mctrl, + .get_mctrl = jsm_tty_get_mctrl, + .stop_tx = jsm_tty_stop_tx, + .start_tx = jsm_tty_start_tx, + .send_xchar = jsm_tty_send_xchar, + .stop_rx = jsm_tty_stop_rx, + .break_ctl = jsm_tty_break, + .startup = jsm_tty_open, + .shutdown = jsm_tty_close, + .set_termios = jsm_tty_set_termios, + .type = jsm_tty_type, + .release_port = jsm_tty_release_port, + .request_port = jsm_tty_request_port, + .config_port = jsm_config_port, +}; + +/* +* jsm_tty_register() +* +* Init the tty subsystem for this board. +*/ +int jsm_tty_register (struct jsm_board *brd) +{ +int rc =0 ; + +DPRINTK (INIT ,INFO ,"start\n" ); + +if (!brd->jsm_major_serial_registered) { +if (rc <0 ) { +printk (KERN_ERR "Can't register tty device (%d)\n" , rc); +return rc; + } + brd->jsm_major_serial_registered =1 ; + brd->jsm_serial_major = jsm_uart_driver.major; + } + +DPRINTK (INIT ,INFO ,"JSM REGISTER TTY: MAJOR: %d\n" , jsm_uart_driver.major); + +return rc; +} + +/* +* jsm_tty_init() +* +* Init the tty subsystem. Called once per board after board has been +* downloaded and init'ed. +*/ +int jsm_tty_init (struct jsm_board *brd) +{ +int i; +u8 *vaddr; +struct jsm_channel *ch; + +if (!brd) +return -ENXIO ; + +DPRINTK (INIT ,INFO ,"start\n" ); + +/* +* Initialize board structure elements. +*/ + + vaddr = brd->re_map_membase; + + brd->nasync = brd->maxports; + +/* +* Allocate channel memory that might not have been allocated +* when the driver was first loaded. +*/ +for (i =0 ; i < brd->nasync; i++) { +if (!brd->channels[i]) { + +/* +* Okay to malloc with GFP_KERNEL, we are not at +* interrupt context, and there are no locks held. +*/ + brd->channels[i] =kmalloc (sizeof (struct jsm_channel ),GFP_KERNEL ); +if (!brd->channels[i]) { +DPRINTK (CORE ,ERR ,"%s:%d Unable to allocate memory for channel struct\n" , + __FILE__, __LINE__); + } +memset (brd->channels[i],0 ,sizeof (struct jsm_channel )); + } + } + + ch = brd->channels[0 ]; + vaddr = brd->re_map_membase; + +/* Set up channel variables */ +for (i =0 ; i < brd->nasync; i++, ch = brd->channels[i]) { + +if (!brd->channels[i]) +continue ; + +spin_lock_init (&ch->ch_lock); + +if (brd->bd_uart_offset ==0x200 ) + ch->ch_neo_uart = (struct neo_uart_struct *) ((u64 ) vaddr + + (brd->bd_uart_offset * i)); + + ch->ch_bd = brd; + ch->ch_portnum = i; + +/* .25 second delay */ + ch->ch_close_delay =250 ; + +init_waitqueue_head (&ch->ch_flags_wait); + } + +DPRINTK (INIT ,INFO ,"finish\n" ); +return 0 ; +} + +int jsm_uart_port_init (struct jsm_board *brd) +{ +int i; +u8 *vaddr; +struct jsm_channel *ch; + +if (!brd) +return -ENXIO ; + +DPRINTK (INIT ,INFO ,"start\n" ); + +/* +* Initialize board structure elements. +*/ + + vaddr = brd->re_map_membase; + brd->nasync = brd->maxports; + +/* Set up channel variables */ +for (i =0 ; i < brd->nasync; i++, ch = brd->channels[i]) { + +if (!brd->channels[i]) +continue ; + + brd->channels[i]->uart_port.irq = brd->irq; + brd->channels[i]->uart_port.type =PORT_JSM ; + brd->channels[i]->uart_port.iotype =UPIO_MEM ; + brd->channels[i]->uart_port.membase = brd->re_map_membase; + brd->channels[i]->uart_port.fifosize =16 ; + brd->channels[i]->uart_port.ops = &jsm_ops; + brd->channels[i]->uart_port.line = brd->channels[i]->ch_portnum + brd->boardnum *2 ; +if (uart_add_one_port (&jsm_uart_driver, &brd->channels[i]->uart_port)) +printk (KERN_INFO "Added device failed\n" ); +else +printk (KERN_INFO "Added device \n" ); + } + +DPRINTK (INIT ,INFO ,"finish\n" ); +return 0 ; +} + +int jsm_remove_uart_port (struct jsm_board *brd) +{ +int i; +struct jsm_channel *ch; + +if (!brd) +return -ENXIO ; + +DPRINTK (INIT ,INFO ,"start\n" ); + +/* +* Initialize board structure elements. +*/ + + brd->nasync = brd->maxports; + +/* Set up channel variables */ +for (i =0 ; i < brd->nasync; i++) { + +if (!brd->channels[i]) +continue ; + + ch = brd->channels[i]; + +uart_remove_one_port (&jsm_uart_driver, &brd->channels[i]->uart_port); + } + +DPRINTK (INIT ,INFO ,"finish\n" ); +return 0 ; +} + +/* +* jsm_tty_uninit() +* +* Uninitialize the TTY portion of this driver. Free all memory and +* resources. +*/ + +void jsm_tty_uninit (struct jsm_board *brd) +{ +if (brd->jsm_major_serial_registered) + brd->jsm_major_serial_registered =1 ; +} + +/* +* +*jsm_input - Process received data. +* +*ch - Pointer to channel structure. +* +*/ + +void jsm_input (struct jsm_channel *ch) +{ +struct jsm_board *bd; +struct tty_struct *tp; +u32 rmask; +u16 head; +u16 tail; +int data_len; +u64 lock_flags; +int flip_len; +int len =0 ; +int n =0 ; +char *buf =NULL ; +char *buf2 =NULL ; +int s =0 ; +int i =0 ; + +DPRINTK (READ ,INFO ,"strat\n" ); +if (!ch) +return ; + + tp = ch->uart_port.info->tty; + + bd = ch->ch_bd; +if (!bd) +return ; + +spin_lock_irqsave (&ch->ch_lock, lock_flags); + +/* +*Figure the number of characters in the buffer. +*Exit immediately if none. +*/ + + rmask =RQUEUEMASK ; + + head = ch->ch_r_head & rmask; + tail = ch->ch_r_tail & rmask; + + data_len = (head - tail) & rmask; +if (data_len ==0 ) { +spin_unlock_irqrestore (&ch->ch_lock, lock_flags); +return ; + } + +DPRINTK (READ ,INFO ,"start\n" ); + +/* +*If the device is not open, or CREAD is off, flush +*input data and return immediately. +*/ +if (!tp || + !(tp->termios->c_cflag &CREAD ) ) { + +DPRINTK (READ ,INFO ,"input. dropping %d bytes on port %d...\n" , data_len, ch->ch_portnum); + ch->ch_r_head = tail; + +/* Force queue flow control to be released, if needed */ +jsm_check_queue_flow_control (ch); + +spin_unlock_irqrestore (&ch->ch_lock, lock_flags); +return ; + } + +/* +* If we are throttled, simply don't read any data. +*/ +if (ch->ch_flags &CH_STOPI ) { +spin_unlock_irqrestore (&ch->ch_lock, lock_flags); +DPRINTK (READ ,INFO ,"Port %d throttled, not reading any data. head: %x tail: %x\n" , + ch->ch_portnum, head, tail); +return ; + } + +DPRINTK (READ ,INFO ,"start 2\n" ); + +/* +* If the rxbuf is empty and we are not throttled, put as much +* as we can directly into the linux TTY flip buffer. +* The jsm_rawreadok case takes advantage of carnal knowledge that +* the char_buf and the flag_buf are next to each other and +* are each of (2 * TTY_FLIPBUF_SIZE) size. +* +* NOTE: if(!tty->real_raw), the call to ldisc.receive_buf +*actually still uses the flag buffer, so you can't +*use it for input data +*/ +if (rawreadok) { +if (tp->real_raw) + flip_len =MYFLIPLEN ; +else + flip_len =2 *TTY_FLIPBUF_SIZE ; + }else + flip_len =TTY_FLIPBUF_SIZE - tp->flip.count; + + len =min (data_len, flip_len); + len =min (len, (N_TTY_BUF_SIZE -1 ) - tp->read_cnt); + +if (len <=0 ) { +spin_unlock_irqrestore (&ch->ch_lock, lock_flags); +DPRINTK (READ ,INFO ,"jsm_input 1 - finish\n" ); +return ; + } + +/* +* If we're bypassing flip buffers on rx, we can blast it +* right into the beginning of the buffer. +*/ +if (rawreadok) { +if (tp->real_raw) { +if (ch->ch_flags &CH_FLIPBUF_IN_USE ) { +DPRINTK (READ ,INFO ,"JSM - FLIPBUF in use. delaying input\n" ); +spin_unlock_irqrestore (&ch->ch_lock, lock_flags); +return ; + } + ch->ch_flags |=CH_FLIPBUF_IN_USE ; + buf = ch->ch_bd->flipbuf; + buf2 =NULL ; + }else { + buf = tp->flip.char_buf; + buf2 = tp->flip.flag_buf; + } + }else { + buf = tp->flip.char_buf_ptr; + buf2 = tp->flip.flag_buf_ptr; + } + + n = len; + +/* +* n now contains the most amount of data we can copy, +* bounded either by the flip buffer size or the amount +* of data the card actually has pending... +*/ +while (n) { + s = ((head >= tail) ? head :RQUEUESIZE ) - tail; + s =min (s, n); + +if (s <=0 ) +break ; + +memcpy (buf, ch->ch_rqueue + tail, s); + +/* buf2 is only set when port isn't raw */ +if (buf2) +memcpy (buf2, ch->ch_equeue + tail, s); + + tail += s; + buf += s; +if (buf2) + buf2 += s; + n -= s; +/* Flip queue if needed */ + tail &= rmask; + } + +/* +* In high performance mode, we don't have to update +* flag_buf or any of the counts or pointers into flip buf. +*/ +if (!rawreadok) { +if (I_PARMRK (tp) ||I_BRKINT (tp) ||I_INPCK (tp)) { +for (i =0 ; i < len; i++) { +/* +* Give the Linux ld the flags in the +* format it likes. +*/ +if (tp->flip.flag_buf_ptr[i] &UART_LSR_BI ) + tp->flip.flag_buf_ptr[i] =TTY_BREAK ; +else if (tp->flip.flag_buf_ptr[i] &UART_LSR_PE ) + tp->flip.flag_buf_ptr[i] =TTY_PARITY ; +else if (tp->flip.flag_buf_ptr[i] &UART_LSR_FE ) + tp->flip.flag_buf_ptr[i] =TTY_FRAME ; +else + tp->flip.flag_buf_ptr[i] =TTY_NORMAL ; + } + }else { +memset (tp->flip.flag_buf_ptr,0 , len); + } + + tp->flip.char_buf_ptr += len; + tp->flip.flag_buf_ptr += len; + tp->flip.count += len; + } +else if (!tp->real_raw) { +if (I_PARMRK (tp) ||I_BRKINT (tp) ||I_INPCK (tp)) { +for (i =0 ; i < len; i++) { +/* +* Give the Linux ld the flags in the +* format it likes. +*/ +if (tp->flip.flag_buf_ptr[i] &UART_LSR_BI ) + tp->flip.flag_buf_ptr[i] =TTY_BREAK ; +else if (tp->flip.flag_buf_ptr[i] &UART_LSR_PE ) + tp->flip.flag_buf_ptr[i] =TTY_PARITY ; +else if (tp->flip.flag_buf_ptr[i] &UART_LSR_FE ) + tp->flip.flag_buf_ptr[i] =TTY_FRAME ; +else + tp->flip.flag_buf_ptr[i] =TTY_NORMAL ; + } + }else +memset (tp->flip.flag_buf,0 , len); + } + +/* +* If we're doing raw reads, jam it right into the +* line disc bypassing the flip buffers. +*/ +if (rawreadok) { +if (tp->real_raw) { + ch->ch_r_tail = tail & rmask; + ch->ch_e_tail = tail & rmask; + +jsm_check_queue_flow_control (ch); + +/* !!! WE *MUST* LET GO OF ALL LOCKS BEFORE CALLING RECEIVE BUF !!! */ + +spin_unlock_irqrestore (&ch->ch_lock, lock_flags); + +DPRINTK (READ ,INFO , +"jsm_input. %d real_raw len:%d calling receive_buf for board %d\n" , + __LINE__, len, ch->ch_bd->boardnum); + tp->ldisc.receive_buf (tp, ch->ch_bd->flipbuf,NULL , len); + +/* Allow use of channel flip buffer again */ +spin_lock_irqsave (&ch->ch_lock, lock_flags); + ch->ch_flags &= ~CH_FLIPBUF_IN_USE ; +spin_unlock_irqrestore (&ch->ch_lock, lock_flags); + + }else { + ch->ch_r_tail = tail & rmask; + ch->ch_e_tail = tail & rmask; + +jsm_check_queue_flow_control (ch); + +/* !!! WE *MUST* LET GO OF ALL LOCKS BEFORE CALLING RECEIVE BUF !!! */ +spin_unlock_irqrestore (&ch->ch_lock, lock_flags); + +DPRINTK (READ ,INFO , +"jsm_input. %d not real_raw len:%d calling receive_buf for board %d\n" , + __LINE__, len, ch->ch_bd->boardnum); + + tp->ldisc.receive_buf (tp, tp->flip.char_buf, tp->flip.flag_buf, len); + } + }else { + ch->ch_r_tail = tail & rmask; + ch->ch_e_tail = tail & rmask; + +jsm_check_queue_flow_control (ch); + +spin_unlock_irqrestore (&ch->ch_lock, lock_flags); + +DPRINTK (READ ,INFO ,"jsm_input. %d not jsm_read raw okay scheduling flip\n" , __LINE__); +tty_schedule_flip (tp); + } + +DPRINTK (READ ,INFO ,"finish\n" ); +} + +void jsm_carrier (struct jsm_channel *ch) +{ +struct jsm_board *bd; + +int virt_carrier =0 ; +int phys_carrier =0 ; + +DPRINTK (CARR ,INFO ,"start...\n" ); +if (!ch) +return ; + + bd = ch->ch_bd; + +if (!bd) +return ; + +if (ch->ch_mistat &UART_MSR_DCD ) { +DPRINTK (CARR ,INFO ,"mistat: %x D_CD: %x\n" , ch->ch_mistat, ch->ch_mistat &UART_MSR_DCD ); + phys_carrier =1 ; + } + +if (ch->ch_c_cflag &CLOCAL ) + virt_carrier =1 ; + +DPRINTK (CARR ,INFO ,"DCD: physical: %d virt: %d\n" , phys_carrier, virt_carrier); + +/* +* Test for a VIRTUAL carrier transition to HIGH. +*/ +if (((ch->ch_flags &CH_FCAR ) ==0 ) && (virt_carrier ==1 )) { + +/* +* When carrier rises, wake any threads waiting +* for carrier in the open routine. +*/ + +DPRINTK (CARR ,INFO ,"carrier: virt DCD rose\n" ); + +if (waitqueue_active (&(ch->ch_flags_wait))) +wake_up_interruptible (&ch->ch_flags_wait); + } + +/* +* Test for a PHYSICAL carrier transition to HIGH. +*/ +if (((ch->ch_flags &CH_CD ) ==0 ) && (phys_carrier ==1 )) { + +/* +* When carrier rises, wake any threads waiting +* for carrier in the open routine. +*/ + +DPRINTK (CARR ,INFO ,"carrier: physical DCD rose\n" ); + +if (waitqueue_active (&(ch->ch_flags_wait))) +wake_up_interruptible (&ch->ch_flags_wait); + } + +/* +* Test for a PHYSICAL transition to low, so long as we aren't +* currently ignoring physical transitions (which is what "virtual +* carrier" indicates). +* +* The transition of the virtual carrier to low really doesn't +* matter... it really only means "ignore carrier state", not +* "make pretend that carrier is there". +*/ +if ((virt_carrier ==0 ) && ((ch->ch_flags &CH_CD ) !=0 ) + && (phys_carrier ==0 )) { +/* +* When carrier drops: +* +* Drop carrier on all open units. +* +* Flush queues, waking up any task waiting in the +* line discipline. +* +* Send a hangup to the control terminal. +* +* Enable all select calls. +*/ +if (waitqueue_active (&(ch->ch_flags_wait))) +wake_up_interruptible (&ch->ch_flags_wait); + } + +/* +* Make sure that our cached values reflect the current reality. +*/ +if (virt_carrier ==1 ) + ch->ch_flags |=CH_FCAR ; +else + ch->ch_flags &= ~CH_FCAR ; + +if (phys_carrier ==1 ) + ch->ch_flags |=CH_CD ; +else + ch->ch_flags &= ~CH_CD ; +} + + +void jsm_check_queue_flow_control (struct jsm_channel *ch) +{ +int qleft =0 ; + +/* Store how much space we have left in the queue */ +if ((qleft = ch->ch_r_tail - ch->ch_r_head -1 ) <0 ) + qleft +=RQUEUEMASK +1 ; + +/* +* Check to see if we should enforce flow control on our queue because +* the ld (or user) isn't reading data out of our queue fast enuf. +* +* NOTE: This is done based on what the current flow control of the +* port is set for. +* +* 1) HWFLOW (RTS) - Turn off the UART's Receive interrupt. +* This will cause the UART's FIFO to back up, and force +* the RTS signal to be dropped. +* 2) SWFLOW (IXOFF) - Keep trying to send a stop character to +* the other side, in hopes it will stop sending data to us. +* 3) NONE - Nothing we can do. We will simply drop any extra data +* that gets sent into us when the queue fills up. +*/ +if (qleft <256 ) { +/* HWFLOW */ +if (ch->ch_c_cflag &CRTSCTS ) { +if (!(ch->ch_flags &CH_RECEIVER_OFF )) { + ch->ch_bd->bd_ops->disable_receiver (ch); + ch->ch_flags |= (CH_RECEIVER_OFF ); +DPRINTK (READ ,INFO ,"Internal queue hit hilevel mark (%d)! Turning off interrupts.\n" , + qleft); + } + } +/* SWFLOW */ +else if (ch->ch_c_iflag &IXOFF ) { +if (ch->ch_stops_sent <=MAX_STOPS_SENT ) { + ch->ch_bd->bd_ops->send_stop_character (ch); + ch->ch_stops_sent++; +DPRINTK (READ ,INFO ,"Sending stop char! Times sent: %x\n" , ch->ch_stops_sent); + } + } + } + +/* +* Check to see if we should unenforce flow control because +* ld (or user) finally read enuf data out of our queue. +* +* NOTE: This is done based on what the current flow control of the +* port is set for. +* +* 1) HWFLOW (RTS) - Turn back on the UART's Receive interrupt. +* This will cause the UART's FIFO to raise RTS back up, +* which will allow the other side to start sending data again. +* 2) SWFLOW (IXOFF) - Send a start character to +* the other side, so it will start sending data to us again. +* 3) NONE - Do nothing. Since we didn't do anything to turn off the +* other side, we don't need to do anything now. +*/ +if (qleft > (RQUEUESIZE /2 )) { +/* HWFLOW */ +if (ch->ch_c_cflag &CRTSCTS ) { +if (ch->ch_flags &CH_RECEIVER_OFF ) { + ch->ch_bd->bd_ops->enable_receiver (ch); + ch->ch_flags &= ~(CH_RECEIVER_OFF ); +DPRINTK (READ ,INFO ,"Internal queue hit lowlevel mark (%d)! Turning on interrupts.\n" , + qleft); + } + } +/* SWFLOW */ +else if (ch->ch_c_iflag &IXOFF && ch->ch_stops_sent) { + ch->ch_stops_sent =0 ; + ch->ch_bd->bd_ops->send_start_character (ch); +DPRINTK (READ ,INFO ,"Sending start char!\n" ); + } + } +} + +/* +* jsm_tty_write() +* +* Take data from the user or kernel and send it out to the FEP. +* In here exists all the Transparent Print magic as well. +*/ +int jsm_tty_write (struct uart_port *port) +{ +int bufcount =0 , n =0 ; +int data_count =0 ,data_count1 =0 ; +u16 head; +u16 tail; +u16 tmask; +u32 remain; +int temp_tail = port->info->xmit.tail; +struct jsm_channel *channel = (struct jsm_channel *)port; + + tmask =WQUEUEMASK ; + head = (channel->ch_w_head) & tmask; + tail = (channel->ch_w_tail) & tmask; + +if ((bufcount = tail - head -1 ) <0 ) + bufcount +=WQUEUESIZE ; + + n = bufcount; + + n =min (n,56 ); + remain =WQUEUESIZE - head; + + data_count =0 ; +if (n >= remain) { + n -= remain; +while ((port->info->xmit.head != temp_tail) && + (data_count < remain)) { + channel->ch_wqueue[head++] = + port->info->xmit.buf[temp_tail]; + + temp_tail++; + temp_tail &= (UART_XMIT_SIZE -1 ); + data_count++; + } +if (data_count == remain) head =0 ; + } + + data_count1 =0 ; +if (n >0 ) { + remain = n; +while ((port->info->xmit.head != temp_tail) && + (data_count1 < remain)) { + channel->ch_wqueue[head++] = + port->info->xmit.buf[temp_tail]; + + temp_tail++; + temp_tail &= (UART_XMIT_SIZE -1 ); + data_count1++; + + } + } + + port->info->xmit.tail = temp_tail; + + data_count += data_count1; +if (data_count) { + head &= tmask; + channel->ch_w_head = head; + } + +if (data_count) { + channel->ch_bd->bd_ops->copy_data_from_queue_to_uart (channel); + } + +return data_count; +} +#if TRC_TO_IOCTL +/* +* jsm_ioctl_name() +* +* Returns a text version of each ioctl value. +*/ +char *jsm_ioctl_name (int cmd) +{ +switch (cmd) { + +case TCGETA :return ("TCGETA" ); +case TCGETS :return ("TCGETS" ); +case TCSETA :return ("TCSETA" ); +case TCSETS :return ("TCSETS" ); +case TCSETAW :return ("TCSETAW" ); +case TCSETSW :return ("TCSETSW" ); +case TCSETAF :return ("TCSETAF" ); +case TCSETSF :return ("TCSETSF" ); +case TCSBRK :return ("TCSBRK" ); +case TCXONC :return ("TCXONC" ); +case TCFLSH :return ("TCFLSH" ); +case TIOCGSID :return ("TIOCGSID" ); + +case TIOCGETD :return ("TIOCGETD" ); +case TIOCSETD :return ("TIOCSETD" ); +case TIOCGWINSZ :return ("TIOCGWINSZ" ); +case TIOCSWINSZ :return ("TIOCSWINSZ" ); + +case TIOCMGET :return ("TIOCMGET" ); +case TIOCMSET :return ("TIOCMSET" ); +case TIOCMBIS :return ("TIOCMBIS" ); +case TIOCMBIC :return ("TIOCMBIC" ); + +/* from digi.h */ +case DIGI_SETA :return ("DIGI_SETA" ); +case DIGI_SETAW :return ("DIGI_SETAW" ); +case DIGI_SETAF :return ("DIGI_SETAF" ); +case DIGI_SETFLOW :return ("DIGI_SETFLOW" ); +case DIGI_SETAFLOW :return ("DIGI_SETAFLOW" ); +case DIGI_GETFLOW :return ("DIGI_GETFLOW" ); +case DIGI_GETAFLOW :return ("DIGI_GETAFLOW" ); +case DIGI_GETA :return ("DIGI_GETA" ); +case DIGI_GEDELAY :return ("DIGI_GEDELAY" ); +case DIGI_SEDELAY :return ("DIGI_SEDELAY" ); +case DIGI_GETCUSTOMBAUD :return ("DIGI_GETCUSTOMBAUD" ); +case DIGI_SETCUSTOMBAUD :return ("DIGI_SETCUSTOMBAUD" ); +case TIOCMODG :return ("TIOCMODG" ); +case TIOCMODS :return ("TIOCMODS" ); +case TIOCSDTR :return ("TIOCSDTR" ); +case TIOCCDTR :return ("TIOCCDTR" ); + +default :return ("unknown" ); + } +} +#endif