setsockopt: SO_PRIORITY and IP_TOS
Subsystems (2)
With regard to 2.6.11-rc4 (and probably others).
I just noticed something that struck me as a bit strange. Might be per design though...
If you set the IP_TOS and then the SO_PRIORITY for a socket, the TOS is what you set it to, and so is the priority.
However, if you set the PRIORITY (to 55, in my case) and then set the IP_TOS (to 3, in my case), then the priority will be re-set to 0.
My opinion is that setting the IP_TOS should not affect the priority, especially if it has already been specifically set on that socket.
Thanks,
Ben
Signature · 2 lines
Ben Greear <[email protected]> Candela Technologies Inc http://www.candelatech.com