Bug in AT91RM9200: icache not enabled!
A message that is not in the archive (sent off-list or not yet received): [email protected]
Hi Eric,
thanks for your reply. Please include mailing list next time.
Quoted 13 lines
I'm working on the same issue and had to modify
cpu.clike on arm920 cpu and had to change incpu/at91rm9200/start.s
from :mrc p15, 0, r0, c1, c0, 0 /* Reset bit :Little Endian end fast bus mode */ ldr r3, =0xC0000080 /* Set bit :Asynchronous clock mode, Not Fast Bus */ ldr r4, =0xC0000000 bic r0, r0, r3 orr r0, r0, r4 /* write r0 in cp15 control register (cp15 r1) */ mcr p15, 0, r0, c1, c0, 0
Quoted 4 lines
to :
ldr r0, =0xc000507C @ write r0 in cp15 control register (cp15 r1) mcr p15, 0, r0, c1, c0,0
Yeah. Pretty much like arm920t.
Quoted 5 lines
& to remove the call to
icache_enablein after lowlevelinit (no more necessary as the icache is enabled by the previous change.in order to get both cache activated.
So you realy have both data and instruction cache enable in U-Boot?
--
Steven
Hi Eric,
Quoted 3 lines
Quoted 3 lines
ldr r0, =0xc000507C @ write r0 in cp15 control register (cp15 r1) mcr p15, 0, r0, c1, c0,0
What is that "Round robin replacement" (Bit 14) for?
--
Steven
Steven Scholz a ?crit :
Quoted 2 lines
thanks for your reply. Please include mailing list next time.
sorry, I'm reading through gmane and I'm not subscribed to the list.
Quoted 3 lines
So you realy have both data and instruction cache enable in U-Boot?
yes, at least I think so as kernel uncompressing is really faster when using this setting.
Just add CFG_CMD_CACHE to #define CONFIG_COMMANDS in your include/configs/x.h file
and you will be able to get cache informations :
=> icache
Instruction Cache is ON
=> dcache
Data (writethrough) Cache is ON
The strange thing is that :
- it's possible to turn icache off but not to enable it again
- it's not possible to turn dcache off.
=> icache off
Instruction Cache is OFF
=> icache on
Instruction Cache is OFF
=> dcache off
Data (writethrough) Cache is ON
=> dcache on
Data (writethrough) Cache is ON
I'm trying to understand why.
Eric
Hi Eric,
Quoted 4 lines
The strange thing is that :
- it's possible to turn icache off but not to enable it again
- it's not possible to turn dcache off.
Quoted 8 lines
=> icache off
Instruction Cache is OFF
=> icache on
Instruction Cache is OFF
=> dcache off
Data (writethrough) Cache is ON
=> dcache on
Data (writethrough) Cache is ON
I am seeing the same. And I dont understand it rigth now.
--
Steven