Skip to contentSkip to conversation

BLueZ Questions

Bluez-users Marcus Mikolaiczyk 2 participants 6 messages Mar 16, 2005 Bluetooth drivers

lore
Share & tools
lore
#0 lore raw

Hi all,

I'm new to the BT and just want to know some things about the BLueZ.
?1 Where can I see what profiles are supported (through what)(SAP?).
As far as I understand we got no 'profiles' but protocols implemented through applications within BlueZ.
Example: for the serial profile I would rather say RFCOMM offers a serial connection over bt. Right?

I found the slides from Marcel Holtmann from the BT Kongress 2003 which show some information for supported protocols/profiles. Are there other resources?

Thanks and cheers
Marcus

-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

maintainer
#1 lore raw

Hi Marcus,

Quoted 6 lines

I'm new to the BT and just want to know some things about the BLueZ. ?1 Where can I see what profiles are supported (through what)(SAP?). As far as I understand we got no 'profiles' but protocols implemented through applications within BlueZ.
Example: for the serial profile I would rather say RFCOMM offers a serial connection over bt. Right?

if the protocol is implemented you can easily have an application running that provides the profile function.

This is not general, but if you ask what profiles you have in mind, I can give you a more detailed answer.

Quoted 3 lines

I found the slides from Marcel Holtmann from the BT Kongress 2003 which show some information for supported protocols/profiles. Are there other resources?

Not that I know of. However you can always use the source, Luke ;)

Regards

Marcel

-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

#2 lore raw

Hi Marcel,

Quoted 5 lines

if the protocol is implemented you can easily have an application running that provides the profile function.

This is not general, but if you ask what profiles you have in mind, I can give you a more detailed answer.

Just shortly descibing our hardware: Embedded Box using an AC45 GSM/GPRS Modem (serial connection) , GPS Samsung modul (serial connection), BT-Infioneon singlestone Bluemoon (serial connection). Profiles looking for:
Serial Profile (through rfcomm ?)
Handsfree (for using a external mobile phone)
SAP (would be nice, cause AC45 supports SAP)
Network(through PAN?)
Fileexchange (through openobex)

Quoted 1 line

Not that I know of. However you can always use the source, Luke ;)

japp, that's the way i suppose it will end anyway.

Regards Marcus

-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

maintainer
#3 lore raw

Hi Marcus,

Quoted 9 lines
Quoted 5 lines

if the protocol is implemented you can easily have an application running that provides the profile function.

This is not general, but if you ask what profiles you have in mind, I can give you a more detailed answer.

Just shortly descibing our hardware: Embedded Box using an AC45 GSM/GPRS Modem (serial connection) , GPS Samsung modul (serial connection), BT-Infioneon singlestone Bluemoon (serial connection).

make sure that you adding my latest -mh patch for that kernel.

Quoted 2 lines

Profiles looking for:
Serial Profile (through rfcomm ?)

To what should this be connected? The GPS or the GSM/GPRS unit?

Quoted 1 line

Handsfree (for using a external mobile phone)

Are the SCO audio data sent over the PCM interface of the chip?

Quoted 1 line

SAP (would be nice, cause AC45 supports SAP)

Nobody has written anything like this, because the hardware for testing is missing. However this works like PDUs over a RFCOMM socket and should be quite simple.

Quoted 1 line

Network(through PAN?)

You can use pand for it.

Quoted 1 line

Fileexchange (through openobex)

Depending on what you wanna do you may need do write some extra code, but there are a lot of examples.

Regards

Marcel

-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

#4 lore raw

Hi Marcel,

Quoted 1 line

make sure that you adding my latest -mh patch for that kernel.

for Kernel 2.4.19 I do (patch-2.4.19-mh18).

Quoted 6 lines
Quoted 3 lines

Profiles looking for:
Serial Profile (through rfcomm ?)

To what should this be connected? The GPS or the GSM/GPRS unit?

What ever is possible.
-GPS for using a PDA(bt) to get positioning informations to spare a separate GPS Module. -A terminal to connect to from a PC
-Maybe using GSM/GPRS as Dial up connection.

Quoted 5 lines
Quoted 2 lines

Handsfree (for using a external mobile phone)

Are the SCO audio data sent over the PCM interface of the chip?

In the first Hardware release there's no Audio codec but ther will be one in the second. I'm not sure how it will be implemented. In the moment the PCM interface is connected to a synchronus serial interface on the tc1130. I'll think we got to diskuss this internally more deeply to clarify the needs and usage.

Quoted 6 lines
Quoted 2 lines

Fileexchange (through openobex)

Depending on what you wanna do you may need do write some extra code, but there are a lot of examples.

I thought it's done through the openobex package. I suppose I can find example on the openobex project site.

Bye Marcus

-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

maintainer
#5 lore raw

Hi Marcus,

Quoted 2 lines
Quoted 1 line

make sure that you adding my latest -mh patch for that kernel.

for Kernel 2.4.19 I do (patch-2.4.19-mh18).

this is good, but the kernel is still behind the current state of the latest 2.6 kernel. See my comments about that in the mailing list archive.

Review

Quoted 10 lines
Quoted 5 lines
Quoted 2 lines

Profiles looking for:
Serial Profile (through rfcomm ?)

To what should this be connected? The GPS or the GSM/GPRS unit?

What ever is possible.
-GPS for using a PDA(bt) to get positioning informations to spare a separate GPS Module.

(quoted diff) +0 -2
-A terminal to connect to from a PC
-Maybe using GSM/GPRS as Dial up connection.

Both is possible, but I think you need to write a little program that listens on a specific RFCOMM channel and then forwards the data from and to the specific serial ports. This program should also take care of creating the needed SDP records.

Such a program doesn't really exists, but it is quite easy to do one based on the current examples.

Quoted 9 lines
Quoted 4 lines
Quoted 1 line

Handsfree (for using a external mobile phone)

Are the SCO audio data sent over the PCM interface of the chip?

In the first Hardware release there's no Audio codec but ther will be one in the second. I'm not sure how it will be implemented. In the moment the PCM interface is connected to a synchronus serial interface on the tc1130. I'll think we got to diskuss this internally more deeply to clarify the needs and usage.

If you have a PCM on your board, then you should simply connect it to the PCM on the Bluetooth module.

Quoted 7 lines
Quoted 5 lines
Quoted 1 line

Fileexchange (through openobex)

Depending on what you wanna do you may need do write some extra code, but there are a lot of examples.

I thought it's done through the openobex package. I suppose I can find example on the openobex project site.

It is, but OpenOBEX is only an implementation of the OBEX protocol. You still need an application that is doing the correct things.

Regards

Marcel

-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users