Skip to contentSkip to conversation

PATCH/RFC libata-2.6 5/5] Odd request buffer length handling in __atapi_pio_bytes()

PATCH Albert Lee 1 participant 2 messages Mar 18, 2005 – Mar 29, 2005

Subsystems (2)
lore
Share & tools
lore

Albert Lee

author
#0 lore raw

Hi Jeff,

Problem:
When testing the k3b CD burning program, k3b issued a request (read TOC) with 81 bytes of buff length.
The CD-RW device didn't like it and returned 82 bytes of data. Detailed log below:

Mar 17 02:18:56 plinuxt01 kernel: ata_scsi_dump_cdb: CDB (1:0,0,0) 43 00 02 00 00 00 01 00 51
Mar 17 02:18:56 plinuxt01 kernel: ata_scsi_translate: ENTER
Mar 17 02:18:56 plinuxt01 kernel: ata_sg_init: Enter
Mar 17 02:18:56 plinuxt01 kernel: ata_sg_init: Exit
Mar 17 02:18:56 plinuxt01 kernel: ata_dev_select: ENTER, ata1: device 0, wait 1
Mar 17 02:18:56 plinuxt01 kernel: ata_tf_load_pio: feat 0x0 nsect 0x0 lba 0x0 0x0 0x20
Mar 17 02:18:56 plinuxt01 kernel: ata_tf_load_pio: device 0xA0
Mar 17 02:18:56 plinuxt01 kernel: ata_exec_command_pio: ata1: cmd 0xA0
Mar 17 02:18:56 plinuxt01 kernel: ata_scsi_translate: EXIT
Mar 17 02:18:56 plinuxt01 kernel: atapi_packet_task: busy wait
Mar 17 02:18:56 plinuxt01 kernel: atapi_packet_task: send cdb
Mar 17 02:18:56 plinuxt01 kernel: __atapi_pio_bytes: qc->curbytes 0, qc->nbytes 81 bytes 82
Mar 17 02:18:56 plinuxt01 kernel: __atapi_pio_bytes: qc->cursg [0]
Mar 17 02:18:56 plinuxt01 kernel: __atapi_pio_bytes: page virtual 13835058055344004696, sgoff 0 offset 0
Mar 17 02:18:56 plinuxt01 kernel: __atapi_pio_bytes: page virtual 13835058055344004696, sgoff 0 offset 0
Mar 17 02:18:56 plinuxt01 kernel: __atapi_pio_bytes: sg_dma_len(sg) [0] sg->length[81]
Mar 17 02:18:56 plinuxt01 kernel: __atapi_pio_bytes: count 81
Mar 17 02:18:56 plinuxt01 kernel: __atapi_pio_bytes: count 81, PAGE_SIZE - offset [4096]
Mar 17 02:18:56 plinuxt01 kernel: __atapi_pio_bytes: 81 bytes data read
Mar 17 02:18:56 plinuxt01 kernel: __atapi_pio_bytes: goto next sg
Mar 17 02:18:56 plinuxt01 kernel: __atapi_pio_bytes: qc->cursg [1]  => Oops, invalid sg get written.
Mar 17 02:18:56 plinuxt01 kernel: __atapi_pio_bytes: page virtual 13835058055344704864, sgoff 0 offset 0
Mar 17 02:18:56 plinuxt01 kernel: __atapi_pio_bytes: page virtual 13835058055344704864, sgoff 0 offset 0
Mar 17 02:18:56 plinuxt01 kernel: __atapi_pio_bytes: sg_dma_len(sg) [4096] sg->length[4096]
Mar 17 02:18:56 plinuxt01 kernel: __atapi_pio_bytes: count 1
Mar 17 02:18:56 plinuxt01 kernel: __atapi_pio_bytes: count 1, PAGE_SIZE - offset [4096]
Mar 17 02:18:56 plinuxt01 kernel: __atapi_pio_bytes: 1 bytes data read
Mar 17 02:18:56 plinuxt01 kernel: __atapi_pio_bytes: qc->curbytes 82, qc->nbytes 81 bytes 82
Mar 17 02:18:56 plinuxt01 kernel: __atapi_pio_bytes: qc->cursg [1]
Mar 17 02:18:56 plinuxt01 kernel: __atapi_pio_bytes: page virtual 13835058055344704864, sgoff 0 offset 1
Mar 17 02:18:56 plinuxt01 kernel: __atapi_pio_bytes: page virtual 13835058055344704864, sgoff 0 offset 1
Mar 17 02:18:56 plinuxt01 kernel: __atapi_pio_bytes: sg_dma_len(sg) [4096] sg->length[4096]
Mar 17 02:18:56 plinuxt01 kernel: __atapi_pio_bytes: count 82
Mar 17 02:18:56 plinuxt01 kernel: __atapi_pio_bytes: count 82, PAGE_SIZE - offset [4095]
Mar 17 02:18:56 plinuxt01 kernel: __atapi_pio_bytes: 82 bytes data read
Mar 17 02:18:56 plinuxt01 kernel: ata_qc_complete: EXIT

Changes:
- When an odd-lengthed buffer is seen, round it to the next even length. As atapi_input_bytes() does in the ide-iops.

I am not sure whether this is the correct. It will overrun the buffer by one byte.
I've tested it on ppc64 without problem. Need comments on this. Attached please find the patch against the libata-2.6 tree for your review. Thanks.

Albert

---------------------------------------

drivers/scsi/libata-core.c +7 -0
@@ -2361,6 +2361,13 @@
 	/* don't cross page boundaries */
 	count = min(count, (unsigned int)PAGE_SIZE - offset);
 
+	/* handle the odd condition */
+	if (unlikely(count & 0x01)) {
+		printk(KERN_WARNING "ata%u: odd count %u rounded: qc->nbytes %u, bytes %u\n",
+		       ap->id, count, qc->nbytes, bytes);
+		count++;
+	}
+
 	buf = kmap(page) + offset;
 
 	qc->curbytes += count;
drivers/scsi/libata-core.c +7 -0
@@ -2361,6 +2361,13 @@
 	/* don't cross page boundaries */
 	count = min(count, (unsigned int)PAGE_SIZE - offset);
 
+	/* handle the odd condition */
+	if (unlikely(count & 0x01)) {
+		printk(KERN_WARNING "ata%u: odd count %u rounded: qc->nbytes %u, bytes %u\n", 
+		       ap->id, count, qc->nbytes, bytes);
+		count++;
+	}
+
 	buf = kmap(page) + offset;
 
 	qc->curbytes += count;
author
#1 lore raw

Resubmit since the offset changed by patch 4/5. Also changed printk() in previous patch to DPRINTK().

Albert

---------------------------------------

drivers/scsi/libata-core.c +7 -0
@@ -2370,6 +2370,13 @@
 	/* don't cross page boundaries */
 	count = min(count, (unsigned int)PAGE_SIZE - offset);
 
+	/* handle the odd condition */
+	if (unlikely(count & 0x01)) {
+		DPRINTK("ata%u: odd count %u rounded: qc->nbytes %u, bytes %u\n",
+			ap->id, count, qc->nbytes, bytes);
+		count++;
+	}
+
 	buf = kmap(page) + offset;
 
 	qc->curbytes += count;
drivers/scsi/libata-core.c +7 -0
@@ -2370,6 +2370,13 @@
 	/* don't cross page boundaries */
 	count = min(count, (unsigned int)PAGE_SIZE - offset);
 
+	/* handle the odd condition */
+	if (unlikely(count & 0x01)) {
+		DPRINTK("ata%u: odd count %u rounded: qc->nbytes %u, bytes %u\n", 
+			ap->id, count, qc->nbytes, bytes);
+		count++;
+	}
+
 	buf = kmap(page) + offset;
 
 	qc->curbytes += count;