Skip to contentSkip to conversation

2.6.11 AC patch CD/DVD issues

DISCUSSION Takis Diakoumis 1 participant 1 message Mar 22, 2005

lore
Share & tools
lore
#0 lore raw

thanks for responding.

Quoted 6 lines
Quoted 2 lines

other ata controllers which then report errors as they can't be unloaded
- though i read somewhere on this list that this was by design???).

IDE is designed to be compiled in. There is a lot to do to fix that. -ac has hackish unload support in test but the right solution is refcounting and driver model based and is in Bartlomiej's dev tree.

should i compile all 'offending' modules into the kernel?

Quoted 9 lines
Quoted 2 lines

all cd ripping/reading tools for audio/multimedia cds report unable to initialize /dev/cdrom (a link to cdrom device).

Are you sure it points to the right device. I've seen similar reports where
/dev/cdrom ended up pointing at the hard disk when the it8212 is added. Seems
some distributions get confused when an IDE controller decides it wants to be first.

sorry, i should have been clearer. i am actually changing the link depending on whether the it8212 controller is enabled in the bios. if enabled, cdrom is /dev/hdh (dvd is /dev/hdg). if not enabled, cdrom/dvd is /dev/hdc and hdd. the links are correct, and like i mentioned in the initial post, i can mount data cds/dvds with no issues whether the controller is enabled or not. it almost sounds like it thinks the cd and dvd drives are hard drives and treating them as such. is there perhaps some additional parameter that should be passed to the kernel on boot, perhaps with ide-cdrom or similar??

thanks again for responding.
Takis