B-Speech Vitac Headset

Bluez-users administrator tootai 2 participants 2 messages Mar 26, 2005 – Mar 27, 2005 Bluetooth drivers

lore

Share & tools

lore

administrator tootai

author

2005-03-26 18:05 UTC #0 lore raw

Hi list,

I try to use the Vitac headset with my Linksys USB bluetooth dongle. I face the following output:

nomade:/usr/src/modules/btsco# sdptool browse 00:00:fd:02:f3:7a
Failed to connect to SDP server on 00:00:FD:02:F3:7A: Permission denied

after having been asked for the PIN code

nomade:/home/user# hcitool info 00:00:fd:02:f3:7a
Requesting information ...
Can't create connection: Input/output error

after having been asked for the PIN code

Relevant part of hcidump -x for the above command:

nomade:~# hcidump -x
HCI sniffer - Bluetooth packet analyzer ver 1.17
device: hci0 snap_len: 1028 filter: 0xffffffff
< HCI Command: Create Connection (0x01|0x0005) plen 13
  7A F3 02 FD 00 00 18 CC 02 00 00 00 01

Quoted 1 line

HCI Event: Command Status (0x0f) plen 4

00 01 05 04

Quoted 1 line

HCI Event: Link Key Request (0x17) plen 6

7A F3 02 FD 00 00
< HCI Command: Link Key Request Negative Reply (0x01|0x000c) plen 6
7A F3 02 FD 00 00

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 10

01 0C 04 00 7A F3 02 FD 00 00

Quoted 1 line

HCI Event: PIN Code Request (0x16) plen 6

7A F3 02 FD 00 00
< HCI Command: PIN Code Request Reply (0x01|0x000d) plen 23
7A F3 02 FD 00 00 04 31 32 33 34 00 00 00 00 00 00 00 00 00 00 00 00

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 10

01 0D 04 00 7A F3 02 FD 00 00

Quoted 1 line

HCI Event: Connect Complete (0x03) plen 11

05 29 00 7A F3 02 FD 00 00 01 00

Note the Link Key Request Negative Reply.

Thanks for help.

My setup is like this

nomade:/usr/src/modules/btsco# hciconfig hci0 revision
hci0:   Type: USB
        BD Address: 00:0C:41:E2:4C:B0 ACL MTU: 192:8 SCO MTU: 64:8
        HCI 16.4
        Chip version: BlueCore02-External
        Max key size: 56 bit
        SCO mapping:  HCI

nomade:/usr/src/modules/btsco# cat /proc/bus/usb/devices

T:  Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 6
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.10custom.2 ehci_hcd
S:  Product=Silicon Integrated Systems [SiS] USB 2.0 Controller
S:  SerialNumber=0000:00:03.3
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=256ms

T:  Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc= 43/900 us ( 5%), #Int=  1, #Iso=  2
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.10custom.2 ohci_hcd
S:  Product=Silicon Integrated Systems [SiS] USB 1.0 Controller (#3)
S:  SerialNumber=0000:00:03.2
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms

T:  Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0a12 ProdID=0001 Rev= 5.25
C:* #Ifs= 3 Cfg#= 1 Atr=c0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 2 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=00 Driver=(none)

T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.10custom.2 ohci_hcd
S:  Product=Silicon Integrated Systems [SiS] USB 1.0 Controller (#2)
S:  SerialNumber=0000:00:03.1
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.10custom.2 ohci_hcd
S:  Product=Silicon Integrated Systems [SiS] USB 1.0 Controller
S:  SerialNumber=0000:00:03.0
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms

Signature · 12 lines

Daniel


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

Marcel Holtmann

maintainer

2005-03-27 03:33 UTC #1 lore raw

Hi Daniel,

Quoted 34 lines

I try to use the Vitac headset with my Linksys USB bluetooth dongle. I face the following output:
nomade:/usr/src/modules/btsco# sdptool browse 00:00:fd:02:f3:7a
Failed to connect to SDP server on 00:00:FD:02:F3:7A: Permission denied
after having been asked for the PIN code
nomade:/home/user# hcitool info 00:00:fd:02:f3:7a
Requesting information ...
Can't create connection: Input/output error
after having been asked for the PIN code
Relevant part of hcidump -x for the above command:
nomade:~# hcidump -x
HCI sniffer - Bluetooth packet analyzer ver 1.17
device: hci0 snap_len: 1028 filter: 0xffffffff
< HCI Command: Create Connection (0x01|0x0005) plen 13
   7A F3 02 FD 00 00 18 CC 02 00 00 00 01
Quoted 1 line
HCI Event: Command Status (0x0f) plen 4
00 01 05 04
Quoted 1 line
HCI Event: Link Key Request (0x17) plen 6
7A F3 02 FD 00 00
< HCI Command: Link Key Request Negative Reply (0x01|0x000c) plen 6
7A F3 02 FD 00 00
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 10
01 0C 04 00 7A F3 02 FD 00 00
Quoted 1 line
HCI Event: PIN Code Request (0x16) plen 6
7A F3 02 FD 00 00
< HCI Command: PIN Code Request Reply (0x01|0x000d) plen 23
7A F3 02 FD 00 00 04 31 32 33 34 00 00 00 00 00 00 00 00 00 00 00 00

Quoted 6 lines

Quoted 1 line
HCI Event: Command Complete (0x0e) plen 10
01 0D 04 00 7A F3 02 FD 00 00
Quoted 1 line
HCI Event: Connect Complete (0x03) plen 11
05 29 00 7A F3 02 FD 00 00 01 00
Note the Link Key Request Negative Reply.

I am sick of decoding this all by myself and thus the newer hcidump versions support verbose decoding (hcidump -X -V). Install the new bluez-hcidump-1.19 package and redo that dump.

Regards

Marcel

-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users