K9F1G08U0M NAND support

Hallo Guys!

I has IXDP425 board with K9F1G08U0M NAND flash as secondary flash(first flash - NOR for booting). Kernel version: 2.4.20_mvl31

I get mtd from CVS and just replace originally linux-2.4.20_mvl31/drivers/mtd with mtd/drivers/mtd. But when does make menuconfig, i can't select CONFIG_PPCHAMELEONEVB, because in drivers/mtd/nand/Config.in this code:

if [ "$CONFIG_PPCHAMELEONEVB" = "y" ]; then
dep_tristate ' NAND Flash device on PPChameleonEVB board'
CONFIG_MTD_NAND_PPCHAMELEONEVB $CONFIG_MTD_NAND
fi

But i build kernel for IXDP425, not for PPCHAMELEONEVB. What i should does, for configure support for K9F1G08U0M NAND flash?

That's wrong. Please, read http://www.linux-
mtd.infradead.org/source.html

And please, pay your attention at the "Kernel versions" section there.

Best Regards,
Artem B. Bityuckiy,
St.-Petersburg, Russia.