Skip to contentSkip to conversation

CONFIG_DTT_LM75 and CFG_EEPROM_PAGE_WRITE_ENABLE ???

U-Boot-Users Steven Scholz 2 participants 3 messages Apr 14, 2005

lore
Share & tools
lore

Steven Scholz

author
#0 lore raw

Hi there,

is it realy necessary to define CFG_EEPROM_PAGE_WRITE_ENABLE in order to use the LM75 within U-Boot?

#ifdef CONFIG_DTT_LM75
#if !defined(CFG_EEPROM_PAGE_WRITE_ENABLE) || \
(CFG_EEPROM_PAGE_WRITE_BITS < 1)

# error "CFG_EEPROM_PAGE_WRITE_ENABLE must be defined and 
CFG_EEPROM_PAGE_WRITE_BITS must be greater than  1 to use CONFIG_DTT_LM75"
#endif
Signature · 1 line
Steven
author
#1 lore raw
Quoted 9 lines · I wrote:

is it realy necessary to define CFG_EEPROM_PAGE_WRITE_ENABLE in order to use the LM75 within U-Boot?

#ifdef CONFIG_DTT_LM75
#if !defined(CFG_EEPROM_PAGE_WRITE_ENABLE) || \
(CFG_EEPROM_PAGE_WRITE_BITS < 1)

# error "CFG_EEPROM_PAGE_WRITE_ENABLE must be defined and 
CFG_EEPROM_PAGE_WRITE_BITS must be greater than  1 to use CONFIG_DTT_LM75"
#endif

Actually these lines above (and in ds1621.c) seems to be the only reference for CFG_EEPROM_PAGE_WRITE_ENABLE in U-Boot! SO could we just drop it if noboby cares about these defines anyway!?

Signature · 1 line
Steven
#2 lore raw
Quoted 11 lines · In message <[email protected]> Steven Scholz wrote:
Quoted 10 lines

is it realy necessary to define CFG_EEPROM_PAGE_WRITE_ENABLE in order to use the LM75 within U-Boot?

#ifdef CONFIG_DTT_LM75
#if !defined(CFG_EEPROM_PAGE_WRITE_ENABLE) || \
(CFG_EEPROM_PAGE_WRITE_BITS < 1)

# error "CFG_EEPROM_PAGE_WRITE_ENABLE must be defined and 
CFG_EEPROM_PAGE_WRITE_BITS must be greater than  1 to use CONFIG_DTT_LM75"
#endif
Quoted 3 lines

Actually these lines above (and in ds1621.c) seems to be the only reference for CFG_EEPROM_PAGE_WRITE_ENABLE in U-Boot! SO could we just drop it if noboby cares about these defines anyway!?

Erik, AFAICT this comes from your W7OLMG board - can you please elucidate.

Best regards,

Wolfgang Denk

Signature · 4 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"All my life I wanted to be someone; I guess I should have been  more
specific."                                              - Jane Wagner