pxa263 flash memory (Strataflash K3)
Hi,
We are developing a PDA using Intel's PXA263 which contains K3 flash memory. I'm using kernel 2.4.19-rmk7-pxa2
The problem is the following:
After powerup, any operation on the flash partitions (unlock, erase, mount) finishes with a timeout, but only if the partition already has data (i.e. if the partition is blank, all operations are completed ok).
I believe there is because I have a buggy K3.
Is there a patch for this kernel version who resolves this issue? or what kernel version must be used?
Thanks
Signature · 32 lines
-- Cuauhtemoc Covarrubias Hardware Design Engineer Diseño y Desarrollo Tecnologico, S.C. Tel./Fax +52 33 3126 0861 [email protected] -- Esta comunicación es confidencial y dirigida solamente para el destinatario. Se prohíbe cualquier revisión, uso, acceso o distribución no autorizada. Si usted cree que este mensaje se le ha enviado por error, notificar por favor el remitente contestando a esta transmisión y borrar este mensaje sin divulgarlo. Gracias. Los correos electrónicos que incluyen archivos adjuntos, son susceptibles a la corrupción de información, interrupción o enmiendas no autorizadas, falsificación y virus, por lo tanto nosotros solamente enviamos y recibimos correos electrónicos bajo la base de que no somos responsables por ningún tipo de corrupción, enmienda, intercepción, falsificación o virus o por cualquier consecuencia derivada de lo anterior. ---------------------------------------------------------------------------- This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message, which arise as a result of e-mail transmission. If verification is required please request a hard-copy version.
Quoted 3 lines
This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail.
Probably it is illegal to answer to such mails.
Signature · 3 lines
Best Regards, Artem B. Bityuckiy, St.-Petersburg, Russia.
Quoted 6 lines · Artem B. Bityuckiy
Quoted 3 lines
This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail.
Probably it is illegal to answer to such mails.
Please accept my apologies, the disclaimer was included on a mistake, please ignore it.
Signature · 6 lines
-- Cuauhtemoc Covarrubias Carranza Hardware Design Engineer Diseño y Desarrollo Tecnologico, S.C. Tel./Fax +52 33 3126 0861 [email protected]
What is the actual error message in the flash status register when the timeout occurs?