E1000 - page allocation failure - saga continues :(
Quoted 2 lines
Anyway i'll try to catch THE option that make the kernel not so happy under heavy stress. Stay tuned
How did this turn out? Any luck? Im seeing this same problem with my e1000, now I did enable rx/tx flow control, I reniced kswapd and I changed vm.min_free_kbytes to 65536, and the problem went away.
It would be nice with a "cleaner" solution though.
---
John Bäckstrand
Quoted 7 lines · [email protected] wrote:
Quoted 2 lines
Anyway i'll try to catch THE option that make the kernel not so happy under heavy stress. Stay tuned
How did this turn out? Any luck? Im seeing this same problem with my e1000, now I did enable rx/tx flow control, I reniced kswapd and I changed vm.min_free_kbytes to 65536, and the problem went away.
It would be nice with a "cleaner" solution though.
What kernel are you using?
Are you doing a lot of block IO as well?
Signature · 1 line
SUSE Labs, Novell Inc.
Re: E1000 - page allocation failure - saga continues :( message 1 of 20)
Quoted 5 lines · Nick Piggin - [email protected] wrote:
Quoted 3 lines · [email protected] wrote:
Quoted 2 lines
Anyway i'll try to catch THE option that make the kernel not so happy under heavy stress. Stay tuned
Quoted 7 lines
Quoted 4 lines
How did this turn out? Any luck? Im seeing this same problem with my e1000, now I did enable rx/tx flow control, I reniced kswapd and I changed vm.min_free_kbytes to 65536, and the problem went away.
It would be nice with a "cleaner" solution though.
What kernel are you using?
Are you doing a lot of block IO as well?
I am using 2.6.11.8.
Yes, the server is a fileserver for both the internet (~10Mbit) and internally (1Gbit e1000). Hardware is pretty old so is pretty heavily loaded and with 256MB RAM.
---
John Bäckstrand
Re: E1000 - page allocation failure - saga continues :( message 1 of 20)
Quoted 7 lines · [email protected] wrote:
Quoted 5 lines · Nick Piggin - [email protected] wrote:
Quoted 2 lines · [email protected] wrote:
It would be nice with a "cleaner" solution though.
Quoted 8 lines
Quoted 2 lines
What kernel are you using?
Are you doing a lot of block IO as well?I am using 2.6.11.8.
Yes, the server is a fileserver for both the internet (~10Mbit) and internally (1Gbit e1000). Hardware is pretty old so is pretty heavily loaded and with 256MB RAM.
OK, well there are some patches in 2.6.12 that should make things slightly better, and then some more patches in -mm (not sure if they'll make it for 2.6.12) that should make things slightly better again.
Basically they work towards reducing the memory allocation "priority" for block IO requests, in relation to networking and other atomic allocation requirements.
If you can't test the latest -mm, or 2.6.12-rc4, then wait for 2.6.12 and 2.6.13 and check back on the problem.
Thanks,
Nick
Signature · 1 line
SUSE Labs, Novell Inc.