Skip to contentSkip to conversation

Traffic shaping problem

LARTC Andre Meij 4 participants 4 messages Dec 29, 2002 – May 16, 2005

lore
Share & tools
lore

Andre Meij

author
#0 lore raw

Hi,

(well, my squirrelmail seems to be working again so this is the final attempt to send a readable mail :) )

I'm trying to use the shaper script from the lartc howto but the following lines:

# both get Stochastic Fairness:
tc qdisc add dev $DEV parent 1:10 handle 10: sfq perturb 10
tc qdisc add dev $DEV parent 1:20 handle 20: sfq perturb 10

Return:

RTNETLINK answers: Invalid argument
RTNETLINK answers: Invalid argument

I seem to mis something,
my current iproute2 version is: iproute-20010824-r2 Kernel 2.4.19

Can anyone place this?

tnx
Andre

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 3 lines · Andre Meij

(well, my squirrelmail seems to be working again so this is the final attempt to send a readable mail :) )

Yes, now it works OK :)

Quoted 6 lines
# both get Stochastic Fairness:
tc qdisc add dev $DEV parent 1:10 handle 10: sfq perturb 10
tc qdisc add dev $DEV parent 1:20 handle 20: sfq perturb 10
Return:
RTNETLINK answers: Invalid argument

Maybe you don't have SFQ compiled in your kernel, or available as a loadable module. If any command that sets a "sfq" qdisc fails, and any other command works, this could be the problem.

Or it could be some kind of syntax error, or reference to a non-existent "parent". Also remember that standard kernel version 2.4.19 doesn't have support for HTB, if this is what the script is trying to use.

Hope it helps.

Signature · 5 lines
Jose Luis Domingo Lopez
Linux Registered User #189436     Debian Linux Woody (Linux 2.4.20-xfs)
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#2 lore raw
In reply to Andre Meij

Dear all,

I am a newbie, so excuse me if I ask stupid things.
I have a proxy server with 2 nic, a subnet for wireless lan (with DHCP), and I would like to limit up/download speed to every client, who is connected to this network.
After reading howto I think the only one solution is to create classes for all possible hosts, with 1024k limits (for one client) and I create rules to assign classes to IP addresses.
(class 1:1=match 192.168.0.2, class1:2=match 192.168.0.3, etc.) It means that I have to create 254 (one C class) classes, I'm afraid that there will be too mutch rules.
Is there any other solution?

Thank you.

Peter.

#3 lore raw
In reply to Andre Meij
Quoted 13 lines · Szluka Peter

Dear all,

I am a newbie, so excuse me if I ask stupid things.
I have a proxy server with 2 nic, a subnet for wireless lan (with DHCP), and I would like to limit up/download speed to every client, who is connected to this network.
After reading howto I think the only one solution is to create classes for all possible hosts, with 1024k limits (for one client) and I create rules to assign classes to IP addresses.
(class 1:1=match 192.168.0.2, class1:2=match 192.168.0.3, etc.) It means that I have to create 254 (one C class) classes, I'm afraid that there will be too mutch rules.
Is there any other solution?

Depends on your hardware - 254 is not that high.

You can make the filtering alot more efficient by hashing -

http://lartc.org/howto/lartc.adv-filter.hashing.html

Andy.
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc