Skip to contentSkip to conversation

What is: "Consider r2q change"

LARTC Oliver Schulze L. 3 participants 5 messages May 26, 2005 – May 30, 2005

lore
Share & tools
lore
#0 lore raw

Hi,
I'm getting this warning/error in /var/log/messages:

May 26 18:21:05 mail kernel: HTB: quantum of class 10010 is small. 

Consider r2q change.

Its a big deal? What should I do?

Many thanks
Oliver

Signature · 7 lines
Oliver Schulze L.
<[email protected]>

_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
#1 lore raw
Quoted 7 lines · Oliver Schulze L.

Hi,
I'm getting this warning/error in /var/log/messages:

May 26 18:21:05 mail kernel: HTB: quantum of class 10010 is small.

Consider r2q change.

Quoted 8 lines

Its a big deal? What should I do?

Many thanks
Oliver

--
Oliver Schulze L.
<[email protected]>

If you are sure you REALLY want the rate that tc is complaining about, you should manually set quantum, probably to 1514 (look at quantum for a rate that does not generate this message for size hints). htb is telling you that the rate is a lot less than the rate of the parent; experience says 31% or less of the parent rate generates this message.

tc class add dev eth1 parent 1:1 classid 1:30 htb rate $RATE ceil $CEIL burst 5k quantum 1514 prio 3

--
gypsy
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

#2 lore raw
In reply to Oliver Schulze L.

Oliver Schulze L. ha scritto:

Quoted 4 lines

I'm getting this warning/error in /var/log/messages:

May 26 18:21:05 mail kernel: HTB: quantum of class 10010 is small. 

Consider r2q change.
Its a big deal? What should I do?

If I understand the source, that message occours when you have a leaf class whose calculated quantum (rate/r2q) is less than 1000 byte and the kernel set the quantum to 1000 byte.
I've read that the quantum should be bigger than the MTU so I don't understand why the kernel don't use a minimum quantum value bigger than 1500. Someone has a clue?

From kernel-source-2.6.10/net/sched/sch_htb.c
if (!hopt->quantum && cl->un.leaf.quantum < 1000) {
printk(KERN_WARNING "HTB: quantum of class %X is small. Consider r2q

change.\n", cl->classid);
    cl->un.leaf.quantum = 1000;
Signature · 10 lines
**********************************************************************
Marco Innocenti              Gruppo Infrastruttura e Sicurezza
CINECA                       phone:+39 0516171553 / fax:+39 0516132198
Via Magnanelli 6/3           e-mail: [email protected]
40033 Casalecchio di Reno    Bologna (Italia)
**********************************************************************
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
#4 lore raw
In reply to Oliver Schulze L.

Hi, yes, thats right, the problem was only with leaf classes. Thanks for clarifyind that

Oliver

Quoted 15 lines · [email protected] wrote:

Oliver Schulze L. ha scritto:

Quoted 4 lines

I'm getting this warning/error in /var/log/messages:

May 26 18:21:05 mail kernel: HTB: quantum of class 10010 is small. 

Consider r2q change.
Its a big deal? What should I do?

If I understand the source, that message occours when you have a leaf class whose calculated quantum (rate/r2q) is less than 1000 byte and the kernel set the quantum to 1000 byte.
I've read that the quantum should be bigger than the MTU so I don't understand why the kernel don't use a minimum quantum value bigger than 1500. Someone has a clue?

Quoted 8 lines

From kernel-source-2.6.10/net/sched/sch_htb.c
if (!hopt->quantum && cl->un.leaf.quantum < 1000) {
printk(KERN_WARNING "HTB: quantum of class %X is small. Consider

r2q change.\n", cl->classid);
   cl->un.leaf.quantum = 1000;

_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc