dual/triple adsl router natting problem
Hi,
I'm new to the list and a babe with iptables. I've tried various routing and filtering cominations as described on different sites around the net and for the moment am trying multihomed host as described on routeskeeper.sourceforge
sorry its a bit long
My setup -
Debian Sarge (stable) no udev, etc, clean and simple kernel 2.6.11 (from unstable)
iptables 1.2.11 (stable) should I go to 1.3.1 ?? (from unstable) fiaif firewall disabled till we get the routing correct at present testing with one internal pc
2x100M network cards eth0-2 each connected to an adsl bridged modem each adsl line is layer 3 bridged with separate IP, GW, NET, BCAST /30 subnets.
1x1000M network card to internal switch and numerous pcs
ip rule add prio 1 from $IPE1 lookup 1
ip rule add prio 1 from $IPE2 lookup 2
### I couldn't get anything until I included the gateway today I tried again with no gateway, now I can't get in from home. ip route add table 1 to default dev $IFE1 via $GWE1
ip route add table 2 to default dev $IFE2 via $GWE2
ip route add to default \
nexthop dev $IFE1 via $GWE1 weight 1 \
nexthop dev $IFE2 via $GWE2 weight 1
iptables -A POSTROUTING -t mangle -j MARK --set-mark 1 \
-m state --state NEW -o $IFE1
iptables -A POSTROUTING -t mangle -j MARK --set-mark 2 \
-m state --state NEW -o $IFE2
iptables -A POSTROUTING -t mangle -j CONNMARK --save-mark \
-m state --state NEW
iptables -A PREROUTING -t mangle -j CONNMARK --restore-mark
ip rule add fwmark 1 lookup 1
ip rule add fwmark 2 lookup 2
iptables -A POSTROUTING -t nat -m mark --mark 1 \
-j SNAT --to-source $IPE1
iptables -A POSTROUTING -t nat -m mark --mark 2 \
-j SNAT --to-source $IPE2
###I can access the net and internal network from the gateway
I can ssh and vnc into the gateway from home
the dual path is nicely load sharing ??
root@mantrix:~# ping -I 58.6.33.214 google.com PING google.com (216.239.39.99) from 58.6.33.214 : 56(84) bytes of data. 64 bytes from 216.239.39.99: icmp_seq=1 ttl=239 time=256 ms
root@mantrix:~# ping -I 58.6.33.210 google.com PING google.com (216.239.37.99) from 58.6.33.210 : 56(84) bytes of data. 64 bytes from 216.239.37.99: icmp_seq=1 ttl=238 time=265 ms
root@mantrix:~# ping google.com PING google.com (216.239.57.99) 56(84) bytes of data. 64 bytes from 216.239.57.99: icmp_seq=1 ttl=240 time=180 ms
Can access the gateway from the internal network.
We can't SNAT from the network out to the real world
Cheers,
Colin
Quoted 2 lines · Colin Tree
I've tried various routing and filtering cominations as described on different sites around the net and
I've used the patches here: http://www.ssi.bg/~ja/
and the HOWTO here: http://www.ssi.bg/~ja/nano.txt
to do multiple gateway routing.
Signature · 2 lines
mail to this address is discarded unless "/dev/rob0"
or "not-spam" is in Subject: headerQuoted 7 lines
Quoted 3 lines
I've tried various routing and filtering cominations as described on different sites around the net and
I've used the patches here: http://www.ssi.bg/~ja/
and the HOWTO here: http://www.ssi.bg/~ja/nano.txt
to do multiple gateway routing.
well, a simple approach I once read worked something like (given that you have ppp0 and ppp1) to distribute connections (not packets):
route -n goes like:
Destination Gateway Genmask Flags Metric Ref Use Iface 212.185.254.105 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 212.185.99.88 0.0.0.0 255.255.255.255 UH 0 0 0 ppp1 0.0.0.0 212.185.254.105 0.0.0.0 UG 0 0 0 ppp0 0.0.0.0 212.185.99.88 0.0.0.0 UG 0 0 0 ppp1
-A PREROUTING -o ppp0 -p tcp -m state --state NEW -m nth --every 2 -j ROUTE
--oif ppp1
-A POSTROUTING -j MASQUERADE -o ppp0
-A POSTROUTING -j MASQUERADE -o ppp1i.e. that netfilter's nat was intelligent enough to get the idea of the ROUTE target.
Jan Engelhardt
Signature · 2 lines
| Gesellschaft fuer Wissenschaftliche Datenverarbeitung Goettingen, | Am Fassberg, 37077 Goettingen, www.gwdg.de