Skip to contentSkip to conversation

USB ohci vs ehci

DISCUSSION Robert Hancock 1 participant 1 message Jun 28, 2005 2 messages not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

#2 lore raw
Quoted 4 lines · Jim Ramsay

I have an NEC-based 'UP215-N101' USB 2.0 PCI card which can apparently appear as a device under ohci-hcd or ehci-hcd, depending on which one is loaded. If both modules are loaded, the device doesn't seem to work, as it is detected by both

USB 2.0 controllers are supposed to be detected by both EHCI and either OHCI or UHCI, since they support both interfaces. EHCI is only used for USB 2.0 high-speed devices and OHCI or UHCI is used for other devices.

If the controller's not working, the problem will be something else..

Signature · 3 lines
Robert Hancock      Saskatoon, SK, Canada
To email, remove "nospam" from [email protected]
Home Page: http://www.roberthancock.com/