Skip to contentSkip to conversation

How to install redhat9.0 on SATA harddisk

DISCUSSION Robert Hancock 2 participants 2 messages Jun 28, 2005 2 messages not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

#2 lore raw
Quoted 1 line · Gene Heskett

RH9.0 is sufficiently ancient that there is no SATA support. IIRC the drives themselves did not become available until around the time of fedora core 1's release.

That's not entirely true - there are some SATA controller drivers in the RH9 kernel, like the Silicon Image controllers, and of course the 3ware cards..

Quoted 2 lines

You would be far more able to handle modern hardware if you downloaded the FC4 set of iso's and burnt them to a fresh set of cdr's.

This is quite true however..

Signature · 3 lines
Robert Hancock      Saskatoon, SK, Canada
To email, remove "nospam" from [email protected]
Home Page: http://www.roberthancock.com/
#3 lore raw
Quoted 2 lines · Robert Hancock
Quoted 1 line · Gene Heskett

RH9.0 is sufficiently ancient that there is no SATA support. IIRC

[...]

Quoted 4 lines

That's not entirely true - there are some SATA controller drivers in the RH9 kernel, like the Silicon Image controllers, and of course the 3ware cards..

Both of which IIRC, kept this list busier than a one armed paper hanger before they were tamed. At about that time.

[...]

Signature · 8 lines
Cheers, Gene
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
99.35% setiathome rank, not too shabby for a WV hillbilly
Yahoo.com and AOL/TW attorneys please note, additions to the above
message by Gene Heskett are:
Copyright 2005 by Maurice Eugene Heskett, all rights reserved.