Skip to contentSkip to conversation

iproute2 ping question

LARTC lartc user 2 participants 2 messages Jun 29, 2005 – Jun 30, 2005

lore
Share & tools
lore

lartc user

author
#0 lore raw

Hi List,

New subscriber/lartc user here. Have read the entire lar&tc howto, alexy's ip_cref, etc. and must say, this makes iptables seem downright *easy*.

I'm trying to build a three-legged linux router (WAN/LAN/DMZ) and have had it more or less working with iptables but would like to learn layer2 routing with iproute2.

I have an adsl/29 network and would like my router to answer on all five of my static addresses on the WAN side of the router. For testing purposes I'm using tcpdump and ping.

For list purposes the WAN is

$ADSL.0  network
$ADSL.1  gateway
$ADSL.2  WAN-address1 (eth1)
$ADSL.3  WAN-address2
$ADSL.4  WAN-address3
$ADSL.5  WAN-address4
$ADSL.6  WAN-address5
$ADSL.7  broadcast

First I bring up the nic.
"ifup eth1"
Ping and eth1 ($ADSL.2) replies correctly.

Next I add a second address to the nic.
"ip addr add $ADSL.3/29 dev eth1"

Ping gets no response from the new address but tcpdump shows the nic receiving the request.

If instead I bring the addresses up as aliases on eth1 the pings work.

Would somebody please explain how to use ip to attach the addresses to that interface and have it respond to them?

Many thanks in advance, and apologies for the thickness of my skull.

:m)
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

#1 lore raw
Quoted 5 lines · lartc user

Hi List,

Would somebody please explain how to use ip to attach the addresses to that interface and have it respond to them?

I use ProxyARP because it is the only thing that made sense to me. In "iptables speak", the external interface receives all packets destined for my /29 network but it puts into INPUT only those with the IP I assign to the NIC. The rest go to the FORWARD chain and thus on to 4 "internal" machines that have external IPs. Two of those "internal" machines have 2 external IPs. I do that like this:

ifconfig eth1 IPAddr1 broadcast BcastIP1 netmask 255.255.255.248 ifconfig eth1:0 IPAddr2 broadcast BcastIP2 netmask 255.255.255.248 ip route add GatewayIP2/32 dev eth1 src IPAddr2

On the machine doing ProxyARP:
ip link set eth1 up
ip addr flush dev eth1
ip addr add dev eth1 local 1.1.1.2/32 brd 1.1.1.255 ip route add GatewayIP/32 dev eth1 src 1.1.1.2

You can see my scripts at http://yesican.chsoft.biz/lartc and you can get more from ftp://andthatsjazz.org/pub/lartc
--
gypsy
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc