Skip to contentSkip to conversation

realtime-preempt-2.6.12-final-V0.7.51-01 compile error and more problems

DISCUSSION Carlo Scarfoglio 3 participants 3 messages Jul 5, 2005 – Jul 6, 2005

lore
Share & tools
lore
#0 lore raw

Compilation stops at this point:

make[1]: `arch/i386/kernel/asm-offsets.s' is up to date.

  CHK     include/linux/compile.h
  CHK     usr/initramfs_list
  CC      net/ipv4/netfilter/ip_conntrack_proto_tcp.o

net/ipv4/netfilter/ip_conntrack_proto_tcp.c: In function `tcp_print_conntrack':
net/ipv4/netfilter/ip_conntrack_proto_tcp.c:333: error: `tcp_lock' undeclared (first use in this function) net/ipv4/netfilter/ip_conntrack_proto_tcp.c:333: error: (Each undeclared identifier is reported only once net/ipv4/netfilter/ip_conntrack_proto_tcp.c:333: error: for each function it appears in.) net/ipv4/netfilter/ip_conntrack_proto_tcp.c:333: warning: type defaults to int' in declaration of type name' etc. etc..

Most likely it depends on the redefinition of DECLARE_RWLOCK in lockhelp.h

More problems....

Patch 7.50-48 has been the first rt kernel that compiled and booted cleanly on my system.

I'm testing the rt kernels because I want to use jack as my system sound mixer/router and to record lp's with my ice1712-based sound card. I have no rt requrements, of course, but I want to get rid of xruns. Kernel 2.6.12 vanilla is quite good already (a big improvement over previous kernels) but still ...

Patch 7.50-48 been running for two days now and seems pretty stable but:

1) My logs are filled with Apic errors all like this

Jul  5 04:30:01 linux kernel: APIC error on CPU0: 02(02)

every 2 seconds, or minute, at random. I've never seen these messages before with vanilla kernels, so it's a bit weird.

2) Whenever I play an mp3 or watch a movie (through jack) I get thousands of times these errors in the logs

Jul  5 20:45:56 linux kernel: `IRQ 8'[828] is being piggy. need_resched=0, cpu=0
Jul  5 20:45:56 linux kernel: Read missed before next interrupt
Jul  5 20:45:56 linux kernel: wow!  That was a 12 millisec bump
Jul  5 20:45:56 linux kernel: bug in rtc_read(): called in state S_IDLE!
Jul  5 20:45:56 linux kernel: `IRQ 8'[828] is being piggy. need_resched=0, cpu=0
Jul  5 20:45:56 linux kernel: Read missed before next interrupt
Jul  5 20:45:56 linux kernel: wow!  That was a 3 millisec bump
Jul  5 20:45:56 linux kernel: bug in rtc_read(): called in state S_IDLE!

This is a known issue, RTC interrupts are missed. I have noticed it many times when ntp is running. It stops working after a few minutes of playing when the the error exceeds 500 PPM. But I thought that ntp compared external reference clocks to the system timer, so the system was missing int 0, not int 8. My mobo has a crappy timer anyway. I had to reduce the tick to 9934 in order to allow ntp to run.

3) I had to disable polling of the cpu temperature by kacpid because whenever it did the sound stopped for 1-3 seconds. The polling took longer and longer after a few hours of uptime. The nice thing is, it caused no xruns. Kernel 2.6.12 vanilla has the same problem, though.

4) Xruns occur every 10-60 minutes even when the system is practically idle (no playback or recording). When copying large files (between sata disks on two sil3112 controllers) xruns frequency is much higher. When sound is used xruns occur every 2 or 20 minutes.

This is a nForce2-mobo (Abit NF7-S V 2.0), Athlon 2800, 1 GB Ram, Terratec DMX6Fire, nVidia 4200 video card, 2 sil3112 sata controllers with 3 disks,etc. SuSE 9.1 with KDE 3.4 and uptodate jack, xmms, mplayer, sound libraries and recording apps.

If more details are needed or I can perform some tests, feel free to ask.

Cheers,

Carlo Scarfoglio

#1 lore raw
Quoted 18 lines · Carlo Scarfoglio

Compilation stops at this point:

make[1]: `arch/i386/kernel/asm-offsets.s' is up to date.

   CHK     include/linux/compile.h
   CHK     usr/initramfs_list
   CC      net/ipv4/netfilter/ip_conntrack_proto_tcp.o

net/ipv4/netfilter/ip_conntrack_proto_tcp.c: In function `tcp_print_conntrack':
net/ipv4/netfilter/ip_conntrack_proto_tcp.c:333: error: `tcp_lock' undeclared (first use in this function) net/ipv4/netfilter/ip_conntrack_proto_tcp.c:333: error: (Each undeclared identifier is reported only once net/ipv4/netfilter/ip_conntrack_proto_tcp.c:333: error: for each function it appears in.) net/ipv4/netfilter/ip_conntrack_proto_tcp.c:333: warning: type defaults to int' in declaration of type name'
etc. etc..

Quoted 1 line

Most likely it depends on the redefinition of DECLARE_RWLOCK in lockhelp.h

Same here...

Quoted 4 lines

More problems....

Patch 7.50-48 has been the first rt kernel that compiled and booted cleanly on my system.

-50-43 is the most recent out of the -50 series that's compiled and operated cleanly on my Athlon box. So far, it appears to be rock-solid. I'd recommend giving it a try if you haven't already.

Quoted 7 lines

I'm testing the rt kernels because I want to use jack as my system sound mixer/router
and to record lp's with my ice1712-based sound card. I have no rt requrements, of course,
but I want to get rid of xruns. Kernel 2.6.12 vanilla is quite good already (a big improvement
over previous kernels) but still ...

Audio without xruns is an RT requirement, IMHO ;-}

Quoted 9 lines

Patch 7.50-48 been running for two days now and seems pretty stable but:

1) My logs are filled with Apic errors all like this

Jul  5 04:30:01 linux kernel: APIC error on CPU0: 02(02)

every 2 seconds, or minute, at random. I've never seen these messages before with vanilla kernels,
so it's a bit weird.

Have you tried disabling CONFIG_X86_IOAPIC_FAST? This is new in the realtime-preempt patches. It's currently stable on 3 out of the 4 boxes I'm testing RT on. On the fourth (P4 with an SIS chipset), it didn't seem to make any difference. I finally had to switch from APIC to PIC (in BIOS) to get the APIC errors on CPU0 to go away.

Quoted 14 lines

2) Whenever I play an mp3 or watch a movie (through jack) I get thousands of times these errors in the logs

Jul  5 20:45:56 linux kernel: `IRQ 8'[828] is being piggy. 
need_resched=0, cpu=0
Jul  5 20:45:56 linux kernel: Read missed before next interrupt
Jul  5 20:45:56 linux kernel: wow!  That was a 12 millisec bump
Jul  5 20:45:56 linux kernel: bug in rtc_read(): called in state S_IDLE!
Jul  5 20:45:56 linux kernel: `IRQ 8'[828] is being piggy. 
need_resched=0, cpu=0
Jul  5 20:45:56 linux kernel: Read missed before next interrupt
Jul  5 20:45:56 linux kernel: wow!  That was a 3 millisec bump
Jul  5 20:45:56 linux kernel: bug in rtc_read(): called in state S_IDLE!
Quoted 9 lines

This is a known issue, RTC interrupts are missed. I have noticed it many times when ntp is
running. It stops working after a few minutes of playing when the the error exceeds 500 PPM.
But I thought that ntp compared external reference clocks to the system timer, so the system
was missing int 0, not int 8. My mobo has a crappy timer anyway. I had to reduce the tick to 9934
in order to allow ntp to run.

Is the RTC the only thing on IRQ 8? The last time I saw the 'IRQ 8 is being piggy' messages on my Athlon box was when the RTC was sharing IRQ 8 with either the video or the USB.

Quoted 7 lines

3) I had to disable polling of the cpu temperature by kacpid because whenever it did the sound
stopped for 1-3 seconds. The polling took longer and longer after a few hours of uptime.
The nice thing is, it caused no xruns. Kernel 2.6.12 vanilla has the same problem, though.

Quoted 6 lines

4) Xruns occur every 10-60 minutes even when the system is practically idle (no playback
or recording). When copying large files (between sata disks on two sil3112 controllers)
xruns frequency is much higher. When sound is used xruns occur every 2 or 20 minutes.

Do these xruns coincide with the RTC 'Read missed before next interrupt' messages?

Have you tried running JACK with a larger buffer period size? Some cards are perfectly happy with -p64, while others need -p128 or -p256 to be xrun free for an extended time. In the past, I've seen a difference between running with 2 and 3 buffer periods (-n2 or -n3).

Also, have you tried bumping up JACK's RT priority? If JACK is running at a lower priority than the IRQ threads for your SATA, then disk activity will most likely cause additional xruns. I've had good luck running JACK with '-R -P60', which sets it's realtime priority above all the IRQ threads.

You may also want to run the IRQ threads for your audio hardware at a slightly higher RT priority than the rest of the IRQ threads.

Quoted 7 lines

This is a nForce2-mobo (Abit NF7-S V 2.0), Athlon 2800, 1 GB Ram, Terratec DMX6Fire,
nVidia 4200 video card, 2 sil3112 sata controllers with 3 disks,etc. SuSE 9.1 with KDE 3.4 and
uptodate jack, xmms, mplayer, sound libraries and recording apps.

If more details are needed or I can perform some tests, feel free to ask.

If you haven't tried this out yet, jack_test4.1 should be a big help for system tuning:

http://www.joq.us/jack/tests/jack_test4.1.tar.gz

Edit jack_test4_run.sh to change settings for JACK priority, number of test clients, etc. On your system, you should be able to run with 28 or more clients without any xruns.

Best Regards,
--ww

#2 lore raw
Quoted 2 lines · William Weston

Audio without xruns is an RT requirement, IMHO ;-}

This isn't even an opinion, it's a fact. If you are capturing data and your audio handling thread does not get scheduled in (periods_per_buffer
- 1) * period_time time units, you lose that chunk of sound *forever*.

Some people on this list make the ridiculous argument that this is different from more conventional RT applications because "they can always record again". Try telling that to someone who is paying for studio time; you won't be running a studio for long. Pro audio is exactly like controlling a satellite or monitoring a power plant, if you don't get scheduled in time, it's a fatal error.

In practice you only have to be more reliable than the alternatives, which are pretty reliable these days.

Quoted 7 lines
Quoted 1 line

4) Xruns occur every 10-60 minutes even when the system is

practically

Quoted 4 lines

idle (no playback
or recording). When copying large files (between sata disks on two sil3112 controllers)
xruns frequency is much higher. When sound is used xruns occur

every 2

Quoted 8 lines
Quoted 1 line

or 20 minutes.

Do these xruns coincide with the RTC 'Read missed before next interrupt'
messages?

Have you tried running JACK with a larger buffer period size? Some cards

Disable CONFIG_RTC_HISTOGRAM.

Then before you try anything else, check the /proc/latency trace output. What's the max reported latency? Is it significantly less than the xruns?

Lee