Skip to contentSkip to conversation

OOPS: frequent crashes with bttv in 2.6.X series (inc. 2.6.12)

DISCUSSION Bodo Eggert 3 participants 3 messages Jul 7, 2005 – Jul 9, 2005 2 messages not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

#2 lore raw
Quoted 2 lines · Bodo Eggert

Now I've upgraded to X.org 6.8.2 and done a first stress-test (copying large files from network to local HDD), and I still can post.

It occured again. So it wasn't that easy.

Signature · 2 lines
Ich danke GMX dafür, die Verwendung meiner Adressen mittels per SPF
verbreiteten Lügen zu sabotieren.
#3 lore raw
Quoted 8 lines · Bodo Eggert
Quoted 2 lines · Bodo Eggert

Now I've upgraded to X.org 6.8.2 and done a first stress-test (copying large files from network to local HDD), and I still can post.

It occured again. So it wasn't that easy.

Bodo/Jeremy/Castet,

It looks to be an old reported trouble with bttv cards.

There is a doc at kernel that treats this subject. It is at:
Documentation/video4linux/bttv/README.freeze

Overlay works by transfering data from BTTV card directelly to Video Card.

This looks to be problem related to DMA troubles on some motherboards.
Some chipsets (via being most prominent) have problems with DMA transfers between two PCI cards (or PCI to AGP) that affects overlay. It may also be related with multiple devices using DMA at the same time.

Castet did mention, on this thread, that this is causing also disk
corruption on his machine, with is an inication that this is the case.

Anyway, it doesn't seem to be a V4L specific issue.

Mauro.

#4 lore raw
Quoted 9 lines · Mauro Carvalho Chehab

It looks to be an old reported trouble with bttv cards.

There is a doc at kernel that treats this subject. It is at:
Documentation/video4linux/bttv/README.freeze

Overlay works by transfering data from BTTV card directelly to Video Card.

This looks to be problem related to DMA troubles on some motherboards.

I've found the no_overlay parameter to be promising, but it seems to be unused by the driver:

$ grep -r no_overlay drivers/*
drivers/media/video/bttv-cards.c:static unsigned int no_overlay=-1;
drivers/media/video/bttv-cards.c:module_param(no_overlay, int, 0444);
drivers/media/video/bttv-cards.c:               if (UNSET == no_overlay) {
drivers/media/video/bttv-cards.c:                       no_overlay = 1;
$

It seems some patch has removed that feature, and I have no grepable pile of patches here nor an idea (except for google) where I can get one.

Signature · 2 lines
Top 100 things you don't want the sysadmin to say:
80. I cleaned up the root partition and now there's LOTS of free space.