V4L BTTV update

diff -u linux-2.6.13/drivers/media/video/bttv-driver.c linux/drivers/media/video/bttv-driver.c
@@ -1,5 +1,5 @@
 /*
-    $Id: bttv-driver.c,v 1.40 2005/06/16 21:38:45 nsh Exp $
+    $Id: bttv-driver.c,v 1.42 2005/07/05 17:37:35 nsh Exp $
 
     bttv - Bt848 frame grabber driver
 

@@ -35,6 +35,7 @@
 #include <linux/sched.h>
 #include <linux/interrupt.h>
 #include <linux/kdev_t.h>
+#include <linux/dma-mapping.h>
 
 #include <asm/io.h>
 #include <asm/byteorder.h>

@@ -698,12 +699,10 @@
 static
 void free_btres(struct bttv *btv, struct bttv_fh *fh, int bits)
 {
-#if 1 /* DEBUG */
 	if ((fh->resources & bits) != bits) {
 		/* trying to free ressources not allocated by us ... */
 		printk("bttv: BUG! (btres)\n");
 	}
-#endif
 	down(&btv->reslock);
 	fh->resources  &= ~bits;
 	btv->resources &= ~bits;

@@ -943,11 +942,6 @@
 	i2c_mux = mux = (btv->audio & AUDIO_MUTE) ? AUDIO_OFF : btv->audio;
 	if (btv->opt_automute && !signal && !btv->radio_user)
 		mux = AUDIO_OFF;
-#if 0
-	printk("bttv%d: amux: mode=%d audio=%d signal=%s mux=%d/%d irq=%s\n",
-	       btv->c.nr, mode, btv->audio, signal ? "yes" : "no",
-	       mux, i2c_mux, in_interrupt() ? "yes" : "no");
-#endif
 
 	val = bttv_tvcards[btv->c.type].audiomux[mux];
 	gpio_bits(bttv_tvcards[btv->c.type].gpiomask,val);

@@ -994,11 +988,6 @@
 	case BTTV_VOODOOTV_FM:
 		bttv_tda9880_setnorm(btv,norm);
 		break;
-#if 0
-	case BTTV_OSPREY540:
-		osprey_540_set_norm(btv,norm);
-		break;
-#endif
 	}
 	return 0;
 }

@@ -1849,7 +1838,7 @@
 
 		if (unlikely(f->tuner != 0))
 			return -EINVAL;
-		if (unlikely(f->type != V4L2_TUNER_ANALOG_TV))
+		if (unlikely (f->type != V4L2_TUNER_ANALOG_TV))
 			return -EINVAL;
 		down(&btv->lock);
 		btv->freq = f->frequency;

@@ -3865,7 +3854,7 @@
 		       btv->c.nr);
 		return -EIO;
 	}
-        if (pci_set_dma_mask(dev, 0xffffffff)) {
+        if (pci_set_dma_mask(dev, DMA_32BIT_MASK)) {
                 printk(KERN_WARNING "bttv%d: No suitable DMA available.\n",
 		       btv->c.nr);
 		return -EIO;

215 lines not on this page · raw message

diff -u linux-2.6.13/drivers/media/video/bttv-risc.c linux/drivers/media/video/bttv-risc.c
@@ -334,10 +334,6 @@
 	}
 
 	vdelay = tvnorm->vdelay;
-#if 0 /* FIXME */
-	if (vdelay < btv->vbi.lines*2)
-		vdelay = btv->vbi.lines*2;
-#endif
 
         xsf = (width*scaledtwidth)/swidth;
         geo->hscale =  ((totalwidth*4096UL)/xsf-4096);

@@ -776,13 +772,8 @@
 		bttv_risc_overlay(btv, &buf->bottom, fmt, ov, 0, 0);
 		break;
 	case V4L2_FIELD_INTERLACED:
-#if 0
-		bttv_risc_overlay(btv, &buf->top,    fmt, ov, 1, 0);
-		bttv_risc_overlay(btv, &buf->bottom, fmt, ov, 0, 1);
-#else
 		bttv_risc_overlay(btv, &buf->top,    fmt, ov, 0, 1);
 		bttv_risc_overlay(btv, &buf->bottom, fmt, ov, 1, 0);
-#endif
 		break;
 	default:
 		BUG();

diff -u linux-2.6.13/drivers/media/video/bttv-i2c.c linux/drivers/media/video/bttv-i2c.c
@@ -1,5 +1,5 @@
 /*
-    $Id: bttv-i2c.c,v 1.21 2005/06/10 17:20:24 mchehab Exp $
+    $Id: bttv-i2c.c,v 1.25 2005/07/05 17:37:35 nsh Exp $
 
     bttv-i2c.c  --  all the i2c code is here
 

@@ -295,14 +295,26 @@
 {
         struct bttv *btv = i2c_get_adapdata(client->adapter);
 
-	if (btv->tuner_type != UNSET)
-		bttv_call_i2c_clients(btv,TUNER_SET_TYPE,&btv->tuner_type);
+	if (bttv_debug)
+		printk(KERN_DEBUG "bttv%d: %s i2c attach [addr=0x%x,client=%s]\n",
+			btv->c.nr,client->driver->name,client->addr,
+			i2c_clientname(client));
+	if (!client->driver->command)
+		return 0;
+
+	if (btv->tuner_type != UNSET) {
+	        struct tuner_setup tun_setup;
+
+	        tun_setup.mode_mask = T_RADIO | T_ANALOG_TV | T_DIGITAL_TV;
+		tun_setup.type = btv->tuner_type;
+		tun_setup.addr = ADDR_UNSET;
+
+		client->driver->command (client, TUNER_SET_TYPE_ADDR, &tun_setup);
+	}
+
 	if (btv->pinnacle_id != UNSET)
-		bttv_call_i2c_clients(btv,AUDC_CONFIG_PINNACLE,
+		client->driver->command(client,AUDC_CONFIG_PINNACLE,
 				      &btv->pinnacle_id);
-        if (bttv_debug)
-		printk("bttv%d: i2c attach [client=%s]\n",
-		       btv->c.nr, i2c_clientname(client));
         return 0;
 }