V4L CX88 Update

diff -u linux-2.6.13/drivers/media/video/cx88/cx88.h linux/drivers/media/video/cx88/cx88.h
@@ -1,5 +1,5 @@
 /*
- * $Id: cx88.h,v 1.67 2005/07/01 12:10:07 mkrufky Exp $
+ * $Id: cx88.h,v 1.68 2005/07/07 14:17:47 mchehab Exp $
  *
  * v4l2 device driver for cx2388x based TV cards
  *

@@ -82,9 +82,9 @@
 static unsigned int inline norm_maxw(struct cx88_tvnorm *norm)
 {
 	return (norm->id & V4L2_STD_625_50) ? 768 : 640;
-//	return (norm->id & V4L2_STD_625_50) ? 720 : 640;
 }
 
+
 static unsigned int inline norm_maxh(struct cx88_tvnorm *norm)
 {
 	return (norm->id & V4L2_STD_625_50) ? 576 : 480;

@@ -220,7 +220,6 @@
 #define RESOURCE_VBI           4
 
 #define BUFFER_TIMEOUT     (HZ/2)  /* 0.5 seconds */
-//#define BUFFER_TIMEOUT     (HZ*2)
 
 /* buffer for one video frame */
 struct cx88_buffer {

@@ -336,11 +335,6 @@
 	struct pci_dev             *pci;
 	unsigned char              pci_rev,pci_lat;
 
-#if 0
-	/* video overlay */
-	struct v4l2_framebuffer    fbuf;
-	struct cx88_buffer         *screen;
-#endif
 
 	/* capture queues */
 	struct cx88_dmaqueue       vidq;

@@ -435,8 +429,6 @@
 /* ----------------------------------------------------------- */
 /* cx88-core.c                                                 */
 
-extern char *cx88_vid_irqs[32];
-extern char *cx88_mpeg_irqs[32];
 extern void cx88_print_irqbits(char *name, char *tag, char **strings,
 			       u32 bits, u32 mask);
 extern void cx88_print_ioctl(char *name, unsigned int cmd);

diff -u linux-2.6.13/drivers/media/video/cx88/cx88-reg.h linux/drivers/media/video/cx88/cx88-reg.h
@@ -1,5 +1,5 @@
 /*
-    $Id: cx88-reg.h,v 1.7 2005/06/03 13:31:51 mchehab Exp $
+    $Id: cx88-reg.h,v 1.8 2005/07/07 13:58:38 mchehab Exp $
 
     cx88x-hw.h - CX2388x register offsets
 

@@ -604,20 +604,11 @@
 #define EN_I2SIN_STR2DAC        0x00004000
 #define EN_I2SIN_ENABLE         0x00008000
 
-#if 0
-/* old */
-#define EN_DMTRX_SUMDIFF        0x00000800
-#define EN_DMTRX_SUMR           0x00000880
-#define EN_DMTRX_LR             0x00000900
-#define EN_DMTRX_MONO           0x00000980
-#else
-/* dscaler cvs */
 #define EN_DMTRX_SUMDIFF        (0 << 7)
 #define EN_DMTRX_SUMR           (1 << 7)
 #define EN_DMTRX_LR             (2 << 7)
 #define EN_DMTRX_MONO           (3 << 7)
 #define EN_DMTRX_BYPASS         (1 << 11)
-#endif
 
 // Video
 #define VID_CAPTURE_CONTROL		0x310180

97 lines not on this page · raw message

diff -u linux-2.6.13/drivers/media/video/cx88/cx88-i2c.c linux/drivers/media/video/cx88/cx88-i2c.c
@@ -1,5 +1,5 @@
 /*
-    $Id: cx88-i2c.c,v 1.24 2005/06/17 18:46:23 mkrufky Exp $
+    $Id: cx88-i2c.c,v 1.28 2005/07/05 17:37:35 nsh Exp $
 
     cx88-i2c.c  --  all the i2c code is here
 

@@ -91,25 +91,32 @@
 
 static int attach_inform(struct i2c_client *client)
 {
-        struct tuner_addr tun_addr;
+        struct tuner_setup tun_setup;
 	struct cx88_core *core = i2c_get_adapdata(client->adapter);
 
-	dprintk(1, "i2c attach [addr=0x%x,client=%s]\n",
-		client->addr, i2c_clientname(client));
+	dprintk(1, "%s i2c attach [addr=0x%x,client=%s]\n",
+		client->driver->name,client->addr,i2c_clientname(client));
 	if (!client->driver->command)
 		return 0;
 
         if (core->radio_type != UNSET) {
-                tun_addr.v4l2_tuner = V4L2_TUNER_RADIO;
-                tun_addr.type = core->radio_type;
-                tun_addr.addr = core->radio_addr;
-                client->driver->command(client,TUNER_SET_TYPE_ADDR, &tun_addr);
+		if ((core->radio_addr==ADDR_UNSET)||(core->radio_addr==client->addr)) {
+			tun_setup.mode_mask = T_RADIO;
+			tun_setup.type = core->radio_type;
+			tun_setup.addr = core->radio_addr;
+
+			client->driver->command (client, TUNER_SET_TYPE_ADDR, &tun_setup);
+		}
         }
         if (core->tuner_type != UNSET) {
-                tun_addr.v4l2_tuner = V4L2_TUNER_ANALOG_TV;
-                tun_addr.type = core->tuner_type;
-                tun_addr.addr = core->tuner_addr;
-                client->driver->command(client,TUNER_SET_TYPE_ADDR, &tun_addr);
+		if ((core->tuner_addr==ADDR_UNSET)||(core->tuner_addr==client->addr)) {
+
+			tun_setup.mode_mask = T_ANALOG_TV;
+			tun_setup.type = core->tuner_type;
+			tun_setup.addr = core->tuner_addr;
+
+			client->driver->command (client,TUNER_SET_TYPE_ADDR, &tun_setup);
+		}
         }
 
 	if (core->tda9887_conf)

86 lines not on this page · raw message

383 lines not on this page · raw message

597 lines not on this page · raw message

diff -u linux-2.6.13/drivers/media/video/cx88/cx88-mpeg.c linux/drivers/media/video/cx88/cx88-mpeg.c
@@ -1,5 +1,5 @@
 /*
- * $Id: cx88-mpeg.c,v 1.30 2005/07/05 19:44:40 mkrufky Exp $
+ * $Id: cx88-mpeg.c,v 1.31 2005/07/07 14:17:47 mchehab Exp $
  *
  *  Support for the mpeg transport stream transfers
  *  PCI function #2 of the cx2388x.

@@ -64,7 +64,6 @@
 	/* write TS length to chip */
 	cx_write(MO_TS_LNGTH, buf->vb.width);
 
-#if 1
 	/* FIXME: this needs a review.
 	 * also: move to cx88-blackbird + cx88-dvb source files? */
 

@@ -76,9 +75,9 @@
 		cx_write(TS_HW_SOP_CNTRL,0x47<<16|188<<4|0x01);
 		if ((core->board == CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_Q) ||
 		    (core->board == CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_T)) {
-			cx_write(TS_SOP_STAT, 0<<16 | 0<<14 | 1<<13 | 0<<12);
+			cx_write(TS_SOP_STAT, 1<<13);
 		} else {
-			cx_write(TS_SOP_STAT,0x00);
+			cx_write(TS_SOP_STAT, 0x00);
 		}
 		cx_write(TS_GEN_CNTRL, dev->ts_gen_cntrl);
 		udelay(100);

@@ -98,7 +97,6 @@
 		cx_write(TS_GEN_CNTRL, 0x06); /* punctured clock TS & posedge driven */
 		udelay(100);
 	}
-#endif
 
 	/* reset counter */
 	cx_write(MO_TS_GPCNTRL, GP_COUNT_CONTROL_RESET);

@@ -270,6 +268,15 @@
 	do_cancel_buffers(dev,"timeout",1);
 }
 
+static char *cx88_mpeg_irqs[32] = {
+	"ts_risci1", NULL, NULL, NULL,
+	"ts_risci2", NULL, NULL, NULL,
+	"ts_oflow",  NULL, NULL, NULL,
+	"ts_sync",   NULL, NULL, NULL,
+	"opc_err", "par_err", "rip_err", "pci_abort",
+	"ts_err?",
+};
+
 static void cx8802_mpeg_irq(struct cx8802_dev *dev)
 {
 	struct cx88_core *core = dev->core;

@@ -282,10 +289,7 @@
 		return;
 
 	cx_write(MO_TS_INTSTAT, status);
-#if 0
-	cx88_print_irqbits(core->name, "irq mpeg ",
-			cx88_mpeg_irqs, status, mask);
-#endif
+
 	if (debug || (status & mask & ~0xff))
 		cx88_print_irqbits(core->name, "irq mpeg ",
 				   cx88_mpeg_irqs, status, mask);

@@ -441,10 +445,8 @@
 	}
 	spin_unlock(&dev->slock);
 
-#if 1
 	/* FIXME -- shutdown device */
 	cx88_shutdown(dev->core);
-#endif
 
 	pci_save_state(pci_dev);
 	if (0 != pci_set_power_state(pci_dev, pci_choose_state(pci_dev, state))) {

@@ -466,10 +468,8 @@
 	pci_set_power_state(pci_dev, PCI_D0);
 	pci_restore_state(pci_dev);
 
-#if 1
 	/* FIXME: re-initialize hardware */
 	cx88_reset(dev->core);
-#endif
 
 	/* restart video+vbi capture */
 	spin_lock(&dev->slock);

diff -u linux-2.6.13/drivers/media/video/cx88/cx88-dvb.c linux/drivers/media/video/cx88/cx88-dvb.c
@@ -1,5 +1,5 @@
 /*
- * $Id: cx88-dvb.c,v 1.39 2005/07/02 20:00:46 mkrufky Exp $
+ * $Id: cx88-dvb.c,v 1.41 2005/07/04 19:35:05 mkrufky Exp $
  *
  * device driver for Conexant 2388x based TV cards
  * MPEG Transport Stream (DVB) routines

@@ -30,22 +30,20 @@
 #include <linux/file.h>
 #include <linux/suspend.h>
 
-/* these three frontends need merging via linuxtv cvs ... */
-#define HAVE_CX22702 1
-#define HAVE_OR51132 1
-#define HAVE_LGDT3302 1
-
 #include "cx88.h"
 #include "dvb-pll.h"
-#include "mt352.h"
-#include "mt352_priv.h"
-#if HAVE_CX22702
+
+#if CONFIG_DVB_MT352
+# include "mt352.h"
+# include "mt352_priv.h"
+#endif
+#if CONFIG_DVB_CX22702
 # include "cx22702.h"
 #endif
-#if HAVE_OR51132
+#if CONFIG_DVB_OR51132
 # include "or51132.h"
 #endif
-#if HAVE_LGDT3302
+#if CONFIG_DVB_LGDT3302
 # include "lgdt3302.h"
 #endif
 

@@ -104,6 +102,7 @@
 
 /* ------------------------------------------------------------------ */
 
+#if CONFIG_DVB_MT352
 static int dvico_fusionhdtv_demod_init(struct dvb_frontend* fe)
 {
 	static u8 clock_config []  = { CLOCK_CTL,  0x38, 0x39 };

@@ -171,8 +170,9 @@
 	.demod_init    = dntv_live_dvbt_demod_init,
 	.pll_set       = mt352_pll_set,
 };
+#endif
 
-#if HAVE_CX22702
+#if CONFIG_DVB_CX22702
 static struct cx22702_config connexant_refboard_config = {
 	.demod_address = 0x43,
 	.pll_address   = 0x60,

@@ -186,7 +186,7 @@
 };
 #endif
 
-#if HAVE_OR51132
+#if CONFIG_DVB_OR51132
 static int or51132_set_ts_param(struct dvb_frontend* fe,
 				int is_punctured)
 {

@@ -203,7 +203,7 @@
 };
 #endif
 
-#if HAVE_LGDT3302
+#if CONFIG_DVB_LGDT3302
 static int lgdt3302_set_ts_param(struct dvb_frontend* fe, int is_punctured)
 {
 	struct cx8802_dev *dev= fe->dvb->priv;

@@ -237,7 +237,7 @@
 
 	/* init frontend */
 	switch (dev->core->board) {
-#if HAVE_CX22702
+#if CONFIG_DVB_CX22702
 	case CX88_BOARD_HAUPPAUGE_DVB_T1:
 		dev->dvb.frontend = cx22702_attach(&hauppauge_novat_config,
 						   &dev->core->i2c_adap);

@@ -248,6 +248,7 @@
 						   &dev->core->i2c_adap);
 		break;
 #endif
+#if CONFIG_DVB_MT352
 	case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T1:
 		dev->core->pll_addr = 0x61;
 		dev->core->pll_desc = &dvb_pll_lg_z201;

@@ -268,13 +269,14 @@
 		dev->dvb.frontend = mt352_attach(&dntv_live_dvbt_config,
 						 &dev->core->i2c_adap);
 		break;
-#if HAVE_OR51132
+#endif
+#if CONFIG_DVB_OR51132
 	case CX88_BOARD_PCHDTV_HD3000:
 		dev->dvb.frontend = or51132_attach(&pchdtv_hd3000,
 						 &dev->core->i2c_adap);
 		break;
 #endif
-#if HAVE_LGDT3302
+#if CONFIG_DVB_LGDT3302
 	case CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_Q:
 		dev->ts_gen_cntrl = 0x08;
 		{

diff -u linux-2.6.13/drivers/media/video/cx88/cx88-blackbird.c linux/drivers/media/video/cx88/cx88-blackbird.c
@@ -690,11 +690,9 @@
 	int bitrate_mode = 1;
 	int bitrate = 7500000;
 	int bitrate_peak = 7500000;
-#if 1
 	bitrate_mode = BLACKBIRD_VIDEO_CBR;
 	bitrate = 4000*1024;
 	bitrate_peak = 4000*1024;
-#endif
 
 	/* assign stream type */
 	blackbird_api_cmd(dev, BLACKBIRD_API_SET_STREAM_TYPE, 1, 0, BLACKBIRD_STREAM_PROGRAM);

@@ -810,9 +808,6 @@
 	cx_write(MO_VBOS_CONTROL, 0x84A00); /* no 656 mode, 8-bit pixels, disable VBI */
 	cx_clear(MO_OUTPUT_FORMAT, 0x0008); /* Normal Y-limits to let the mpeg encoder sync */
 
-#if 0 /* FIXME */
-	set_scale(dev, 720, 480, V4L2_FIELD_INTERLACED);
-#endif
 	blackbird_codec_settings(dev);
 	msleep(1);