Skip to contentSkip to conversation

tg3 fails with x86_64 (but works with i386)

DISCUSSION Frank Steiner 2 participants 4 messages Jul 11, 2005 – Jul 12, 2005

lore
Share & tools
lore
#0 lore raw

Hi,

I've two 3com 3C996B-T network cards (lspci says it's a Broadcom BCM5701 chip) in Asus A8V boards with an AMD64 4000+ cpu. Booting a x86_64 version of the 2.6.12.2 kernel, the tg3 module complains

tg3.c: v3.31 (June 8, 2005)
tg3_test_dma() Write the buffer failed -19
tg3: DMA engine test failed, aborting.

and no eth0 is available. However, when booting a 32bit version of 2.6.12.2, the cards work well with the tg3 module. So it must be some problem in the x86_64 specific kernel code.

Any ideas what I could do? What further information can I provide?

cu,
Frank

Signature · 5 lines
Dipl.-Inform. Frank Steiner   Web:  http://www.bio.ifi.lmu.de/~steiner/
Lehrstuhl f. Bioinformatik    Mail: http://www.bio.ifi.lmu.de/~steiner/m/
LMU, Amalienstr. 17           Phone: +49 89 2180-4049
80333 Muenchen, Germany       Fax:   +49 89 2180-99-4049
* Rekursion kann man erst verstehen, wenn man Rekursion verstanden hat. *
#1 lore raw

Frank Steiner wrote

Quoted 10 lines

Hi,

I've two 3com 3C996B-T network cards (lspci says it's a Broadcom BCM5701 chip) in Asus A8V boards with an AMD64 4000+ cpu. Booting a x86_64 version of the 2.6.12.2 kernel, the tg3 module complains

tg3.c: v3.31 (June 8, 2005)
tg3_test_dma() Write the buffer failed -19
tg3: DMA engine test failed, aborting.

I could solve this: The A8V boards have (like all 64bit boards I guess?) an option for memory remapping around the memory hole at 3.5GB. When this remapping is activated, the tg3 driver fails with the error message above. If the remapping is deactivated, the driver and the card work fine (but linux can only work with 3.7 of the 4GB). But I need to have the remapping deactivated anyway, because the fglrx driver won't work either otherwise.

cu,
FRank

Signature · 5 lines
Dipl.-Inform. Frank Steiner   Web:  http://www.bio.ifi.lmu.de/~steiner/
Lehrstuhl f. Bioinformatik    Mail: http://www.bio.ifi.lmu.de/~steiner/m/
LMU, Amalienstr. 17           Phone: +49 89 2180-4049
80333 Muenchen, Germany       Fax:   +49 89 2180-99-4049
* Rekursion kann man erst verstehen, wenn man Rekursion verstanden hat. *
#2 lore raw
Quoted 14 lines · Frank Steiner

Frank Steiner wrote

Quoted 10 lines

Hi,

I've two 3com 3C996B-T network cards (lspci says it's a Broadcom BCM5701 chip) in Asus A8V boards with an AMD64 4000+ cpu. Booting a x86_64 version of the 2.6.12.2 kernel, the tg3 module complains

tg3.c: v3.31 (June 8, 2005)
tg3_test_dma() Write the buffer failed -19
tg3: DMA engine test failed, aborting.

Quoted 7 lines

I could solve this: The A8V boards have (like all 64bit boards I guess?) an option for memory remapping around the memory hole at 3.5GB. When this remapping is activated, the tg3 driver fails with the error message above. If the remapping is deactivated, the driver and the card work fine (but linux can only work with 3.7 of the 4GB). But I need to have the remapping deactivated anyway, because the fglrx driver won't work either otherwise.

you were using a binary kernel module but didn't mention it in your report? tsk tsk...

#3 lore raw

Arjan van de Ven wrote

Quoted 2 lines

you were using a binary kernel module but didn't mention it in your report? tsk tsk...

No, for testing fglrx that was a SuSE kernel, while I was using a vanilla 2.6.12.2 kernel for debugging the tg3 module. Come on, first thing I do for debugging a problem is using an untainted kernel :-) I've learned this lesson from the LKML already :-)

Signature · 5 lines
Dipl.-Inform. Frank Steiner   Web:  http://www.bio.ifi.lmu.de/~steiner/
Lehrstuhl f. Bioinformatik    Mail: http://www.bio.ifi.lmu.de/~steiner/m/
LMU, Amalienstr. 17           Phone: +49 89 2180-4049
80333 Muenchen, Germany       Fax:   +49 89 2180-99-4049
* Rekursion kann man erst verstehen, wenn man Rekursion verstanden hat. *