Skip to contentSkip to conversation

how to define a port range?

LARTC Thorsten Gehrig 2 participants 2 messages Jul 20, 2005

lore
Share & tools
lore
#0 lore raw

hi,
i´am new in tcc (tcng). i try to define my qos for VoIP-Services. For this i wantto define a class for a port range 10000 till 15000.

how is the right way?
this down works:
class (<$voip>) if tcp_sport => 10000 || tcp_sport <= 10000 ;

are there any examples of real installations - maybe including VoIP, HTTP and P2P services?

regards
thorsten gehrig

_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

#1 lore raw
Quoted 8 lines · Thorsten Gehrig

hi,
i´am new in tcc (tcng). i try to define my qos for VoIP-Services. For this i wantto define a class for a port range 10000 till 15000.

how is the right way?
this down works:
class (<$voip>) if tcp_sport => 10000 || tcp_sport <= 10000 ;

Quoted 6 lines

are there any examples of real installations - maybe including VoIP, HTTP and P2P services?

regards
thorsten gehrig

Hi,

You may want to use the mask.
Go to the LART QoS Cookbook, and you'll see tc filter lines with:

"21 0xfffff"

If you want to match both 21 and 22, use: "22 0xffffe"

Regards,

Sylvain

_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc